allen roth LFM8104AX-02 4 Light Matte Black Traditional Dry rated Chandelier Instructions
- June 15, 2024
- Allen+Roth
Table of Contents
allen roth LFM8104AX-02 4 Light Matte Black Traditional Dry rated
Chandelier
Product Information
Specifications
- Model/Modelo : LFM8104AX-02
- Estimated Assembly Time : 20-30 minutes
- Tools Required (Not Included) : AA batteries (x2), BB batteries (x3)
- Made in China
Package Contents
- A x 1
- B x 1
- C (preassembled) x 1
- D (preassembled) x 1
- E x 1
- F x 1
- G x 1
- H x 2
- I x 1
- J x 4
- K x 1
Hardware Contents
- AA x 2
- BB x 3
Care and Maintenance
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
Trademark Information
ALLEN + ROTH and logo design are trademarks or registered trademarks of LF,
LLC. All rights reserved.
Problem and Possible Cause
- Problem : Bulb will not light.
- Possible Cause
1. Replace light bulb.
2. Check wiring.Usage Instructions
Step 1: Assembly
- Unscrew nut D from screw collar loop C.
- Attach A to outlet box using AA.
- Use pliers (not included) to tighten locking nut on B until it touches A.
- Temporarily place E through B to determine the amount of adjustment necessary for B.
Step 2: Chain Adjustment
- Unscrew the K/D rings H from chain G.
- Adjust chain G to the desired length.
- Spread the chain link using standard pliers (not included) and screwdriver (not included).
- Twist the chain link in the opposite direction and remove the extra chain lengths.
Step 3: Installation
- Feed wires and ground wire up chain G, through nut D, canopy E, screw collar loop C, threaded tube B, and into the outlet box.
- Weave electrical wires
- Twist stripped ends of the white, ribbed or tinned wire without writing from the fixture evenly against the white wire from the outlet box.
- Connect the black, smooth or un-tinned wire with writing from the fixture to the black wire from the outlet box in the same manner.
- Snip ends.
- Attach copper wire to ground wire.
- Attach one K/D ring (H) to the loop of rod (F), and the other one through the nut (D), canopy (E), and onto the screw collar loop (C).
- Screw the K/D rings (H) until the chain (G) is firmly secured.
Frequently Asked Questions (FAQ)
-
Q: How long does it take to assemble the product?
A: The estimated assembly time is 20-30 minutes. -
Q: What tools are required for assembly?
A: Tools required for assembly, but not included, are AA batteries (x2) and BB batteries (x3). -
Q: Where is the product manufactured?
A: The product is made in China.
ALLEN + ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service
department at 866-439-9800, 8 a.m. – 8
p.m., EST, Monday – Sunday. You could also contact us at
ascs@lowes.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 20-30 minutes.
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit lowes.com for more information
TROUBLESHOOTING
CARE AND MAINTENANCE **
**
Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.
WARRANTY
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
PACKAGE CONTENTS
HARDWARE CONTENTS
Note: Hardware shown actual size.
INSTALLATION OVERVIEW
- Turn off the power and remove existing fixture.
- Unscrew nut D from screw collar loop C. Attach A to outlet box using AA.
- Use pliers (not included) to tighten locking nut on B until locking nut touches A.
- Temporarily place E through B to determine amount of adjustment necessary for B.
- Unscrew the K/D rings H from chain G. Adjust chain G to desired length. Spread the chain link using standard pliers (not included) and screw driver (not included) and twist chain link in opposite direction and remove the extra chain lengths.
- ****Attach one K/D ring (H) to the loop of rod (F), and the other one through the nut (D), through canopy (E) and onto the screw collar loop (C). Then, screw the K/D rings (H) until the chain (G ) is firmly secured.
- ****Weave electrical wires and ground wire up chain G, through nut D, through canopy E, through the screw collar loop C, through threaded tube B, and into outlet box.
- ****Feed wires. Twist stripped ends of the white, ribbed or tinned wire without writing from the fixture evenly against the white wire from the outlet box. Connect the black, smooth or un-tinned wire with writing from the fixture to the black wire from the outlet box in the same manner. Snip ends. Attach copper wire to ground wire.
- ****Attach BB to connections with electrical tape (not included).
- ****Lift E up over C, securing in place with previously removed D.
- Install light bulbs (not included). Use 60-watt max. standard-base incandescent bulbs or CFL/LED equivalents
- ****Assembly is complete. Turn power back on.
Documents / Resources
|
allen roth LFM8104AX-02 4 Light Matte Black Traditional Dry rated
Chandelier
[pdf] Instructions
LFM8104AX-02 4 Light Matte Black Traditional Dry rated Chandelier,
LFM8104AX-02, 4 Light Matte Black Traditional Dry rated Chandelier, Matte
Black Traditional Dry rated Chandelier, Black Traditional Dry rated
Chandelier, Traditional Dry rated Chandelier, Dry rated Chandelier, Chandelier
---|---