Savio FL-01 LED Headlamp User Manual

Savio FL-01 LED Headlamp

Product Information

Specifications

• Model: FL-01
• Operation modes:
  • COB LED 100%
  • COB LED 25%
  • Stroboscope
  • SOS
• Luminous flux: 140 lm (COB LED 100%), 35 lm (COB LED 25%)
• Operating time: 4 hours (COB LED 100%), 15 hours (COB LED 25%), 15 hours (Stroboscope, SOS)
• Warranty: 24 months

Product Usage Instructions

Introduction
Thank you for choosing the Savio FL-01 LED headlamp. This user manual will provide you with all the necessary information to ensure safe and optimal use of the product.

• If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.
• If there is something that we could improve on our products, please write to us at support@savio.net.pl

Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of purchased device it is recommended to read the whole manual.

Package content:

• SAVIO FL-01 Led headlamp
• User manual

Instructions for use:

• Before use please insert 3 AAA / LR03 1.5 V batteries (not included in the package), by opening the back part of the headlamp.
• Press the power button to turn the headlamp on (the head- lamp will operate in COB LED 100% mode).
• Press the power button for the second time to switch to COB LED 25% mode.
• Press the power button for the third time to turn on the stro- boscope mode.
• Press and hold the power button for 3s to turn on the SOS mode. 2.6 Once in strobe mode or SOS mode press power button to turn off the headlamp.

Safety Precautions
Before using the headlamp, please read and understand the following safety precautions:

• Do not disassemble or modify the headlamp as it may result in damage or void the warranty.
• Avoid shining the headlamp directly into the eyes, as it may cause temporary blindness.
• Keep the headlamp away from children and pets to prevent accidental ingestion or injury.
• Do not expose the headlamp to water or other liquids. It is not waterproof.

Operation Modes **

**

The Savio FL-01 LED headlamp offers multiple operation modes for different lighting needs:

• COB LED 100%: Provides a luminous flux of 140 lm for maximum brightness.
• COB LED 25%: Provides a luminous flux of 35 lm for reduced brightness and longer operating time.
• Stroboscope: Activates a flashing light mode for emergency signaling.
• SOS: Activates the SOS signal mode for distress situations.

Technical specification:

• Power supply: 3 × AAA battery (not included)
• Power: 1 W
• Luminous flux: 140 / 35 lm
• Color temperature: 8000 K
• Operation modes: COB LED 100%, COB LED 25%, stroboscope, SOS
• Color rendering index (CRI): 70
• IPX waterproof rating: IPX3
• Maximum range: 10 m
• Working time: 4 – 15 h*
• Size: 66 × 43 × 27 mm
• Weight: 18 g
• The working time depends on the capacity of the batteries used and the selected operation mode.

Safety conditions:

• Use the product in accordance with its intended use, as improper use may damage the product.
• Do not expose the device to moisture, heat or sunlight, do not use the product in a dusty environment.
• The device should be cleaned only with a dry cloth.
• Independent repairs and modification result automatic loss of the warranty.
• Hitting or dropping may damage the product.

Warranty:
The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. War-ranty card is available for download on our website:
www.savio.net.pl/en/service

Usage Instructions
To use the Savio FL-01 LED headlamp, please follow these steps:

1. Open the battery compartment located at the back of the headlamp.
2. Insert three AAA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment securely.
4. Press the power button located on the top of the headlamp to turn it on.
5. To switch between operation modes, press the power button repeatedly until the desired mode is selected.
6. To turn off the headlamp, press and hold the power button for afew seconds.

Information of the utilization of electrical and electronic equipment

• This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of wa-ste or to a recycling center. Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get into air, soil and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protecion by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.

Information for customers and contractors and communication regarding

complaints

Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regula-tions to obtain personal data as well as processing entities pro-viding services to Elmak Sp. z o.o. Your personal data will be sto-red on the basis of Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a com-plaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.

PRODUCER:
Elmak Sp. z o.o.
ul. Morgowa 81
35-323 Rzeszow
www.savio.net.pl

FAQ

• Q1: Is the Savio FL-01 LED headlamp waterproof?
  A1: No, the headlamp is not waterproof. Avoid exposing it to water or other liquids.

• Q2: How long is the warranty period?
  A2: The warranty period for the Savio FL-01 LED headlamp is 24 months.

• Q3: Can I replace the batteries myself?
  A3: Yes, the headlamp uses three AAA batteries, and you can replace them yourself. Ensure correct polarity when inserting the batteries.

• Q4: How do I activate the SOS signal mode?
  A4: To activate the SOS signal mode, switch to the Stroboscope mode, and then press and hold the power button for a few seconds.

References

• Strona główna - Savio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>