All-Clad 3.5L EZ Clean Pro Deep Fryer Owner’s Manual

All-Clad 3.5L EZ Clean Pro Deep Fryer

IMPORTANT SAFEGUARDS

When using fryer, basic safety precautions should always be followed, including the following:

1. Read all instructions before using.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electric shock, do not immerse cord, plugs or fryer in water or other liquid.
4. Close supervision is necessary when the fryer is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the fryer.
6. Do not operate the fryer with a damaged cord or plug or after the fryer malfunctions, or has been damaged in any manner. Return the fryer to the nearest authorized service facility for examination, repair or adjustment.
7. The use of accessory attachments not recommended by the fryer manufacturer may cause injuries.
8. Do not use outdoors
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving fryer containing hot oil.
12. Always attach plug to the fryer first (depending on model), then plug cord in the wall outlet. To disconnect, turn any control to ” off”, then remove plug from wall outlet.
13. Do not use the fryer for other than intended use.
14.  Be sure handles are properly assembled to basket and locked in place. See detailed assembly instructions. Ensure the two metallic parts of the basket handle are correctly positioned before locking the handle on the basket.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

SAFETY INSTRUCTIONS

• Before use, check that your local voltage corresponds with the specifications shown on the appliance nameplate located under the fryer.

• Only connect the appliance to electrical sockets which have a minimum load of 15A. If the sockets and the plug on the appliance should prove incompatible, get a professionally qualified technician to replace the socket with a more suitable one.

• This electrical equipment operates at high temperatures which may cause burns. Do not touch the filter, window, metal walls (depending on model), or other apparent metal parts.

• To ensure safe operation, oversized foods must not be inserted into the fryer.

• Ensure that the lid and bowl are completely dry after washing and before use

• The oil level must always be between the Min. and Max. markings.

• Do not overload the basket. For safety reasons never exceed the maximum quantity.

• Never operate your fryer without any oil.

• The cooking times are given as guidelines only.

• The oil must be filtered regularly and changed after 8 to 12 uses.

• Do not mix different types of oil.

• If you use solid vegetable shortening, cut it into pieces and melt it over low heat in a separate pot beforehand, then slowly pour it into the deep fryer pot. Never put solid shortening directly into the deep fryer pot or basket, as this will lead to deterioration of the fryer.

• If the fryer has a removable pot, never remove it while the deep fryer is on.

• This model is equipped with a permanent metallic filter, which does not need to be changed.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  This appliance is not intended to be operated by means of an external timer or a separate remote-control system.

• This appliance is intended to be used in household only.

  • It is not intended to be used in the following applications, and the guarantee will not apply for :
  • staff kitchen areas in shops, offices and other working environments;
  • farm houses;
  • by clients in hotels, motels and other residential type environments;
  • bed and breakfast type environments.

• Warning: Possible eruption. Waters reaction to hot oil is extremely volatile. Please ensure, no matter what the recipe states, food must be dried thoroughly before immersing in hot oil.

• If you have any problems, contact the authorized after-sales service center or the internet address www.all-clad.com

Polarization instructions
If this appliance has a polarized plug (one blade is wider than the other), it is to reduce the risk of electric shock. This plug is intended to fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

Short Cord instructions
Do not use with an extension cord. A short power supply cord is to be provided to reduce the risks resulting from becoming entangled in or tripping over a long cord.

Magnetic connector
The cord is equipped with a detachable magnetic connector. The magnetic connector should be attached directly to the fryer. THIS SHOULD BE DONE PRIOR TO PLUGGING THE CORD INTO THE WALL OUTLET.

DISPOSING OF YOUR APPLIANCE

Environment protection first!
Let’s contribute to protecting the environment!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.

CONGRATULATIONS ON YOUR PURCHASE

All-Clad Metalcrafters created the original collection of professional cookware made with a patented metal bonding process which eliminates uneven heating, an accomplishment that led to All-Clad becoming the product chosen for the kitchens of more four-star restaurants than any other. Still the only complete line of cookware made by an American company with materials produced in its own mill, All-Clad has revolutionized the art of cooking since its introduction.
With five professional cookware collections featuring a variety of bonded metals and finishes, from high grade aluminum and stainless steel to copper, All-Clad combines professional design with high performance for all tastes and cooking styles.
The All-Clad cooking experience now extends to a focused selection of small electrical appliances, each designed without compromise to make a noticeable difference in both use and performance. Cooking connoisseurs now have a wonderful opportunity to complete their kitchen with electrics by All-Clad, the undisputed original. All-Clad Metalcrafters has an ongoing policy of research and development and may modify its products without prior notice.

DESCRIPTION

• A Lid
  1. Permanent filter
  2. Filter cover
  3. Handle
  4. Viewing window
• B Removable control unit and heating element
  1. On/off switch
  2. Timer
  3.  Adjustable thermostat
  4. Power indicator light
  5. Ready indicator light
• C Frying basket
  • Handle
  • MAX food level marker
• D Removable bowl
• E MIN and MAX oil level markers
• F Fixed oil filter grid
• G Reset function
• H Safety carrying handles
• I Filtration and drainage switch
• J Housing
• K Oil box
  1. Lid
  2. Cap
• L Feet
• M Filtration valve
• N Removable power cord

Filtration, drainage and automatic storage of oil/ shortening

• Your fryer is fitted with an exclusive and patented system for : filtration and automatic drainage, suitable for most types of oils and shortenings used for cooking.
• The drainage of oil is completely automatic and safe.
• The automatic patented :filtration system ensures your oil/ shortening stays clean and lasts longer for healthier frying.
• The Oil box container enables you to store your oil and keep it until you want to use it next and to avoid any transfer of flavors.

Easy cleaning

• Your fryer is easy to handle and to dismantle – fig. 1.
• All the parts ( except the control unit) are dishwasher safe – fig. 2.
• Thanks to the patented automatic: filtration and oil storage system, your fryer can go into the dishwasher after each use, making it clean as new after each use.

Using the Oil box container control button

• The Oil box control button has 3 positions – fig. 9.Fry Position : to fry.
• Automatic Oil Filtration Position : to drain and filter the oil into the oil box.
• Oil box Position: to allow for removal of the oil box container.

PREPARATION

Before using for the first time

• The fryer can be completely dismantled – fig. 1.
  Remove the lid. Remove the frying basket, the control unit and the bowl. Remove the oil box by positioning the Oil box control button on the Oil box position.

• Clean the lid, the bowl, the housing, the frying basket – fig. 2 and the Oil box with soap and water or put them in the dishwasher. Clean the control unit and the heating element with a damp cloth. Dry thoroughly.

• After cleaning, press on the filtration valve under the bowl to release any water in the bowl – fig. 3.

• Place the bowl and the heating element in position.

• Place the Oil box control switch on the Oil box position and insert the empty Oil box into the fryer.

• Completely unfold the basket handle; a “click” indicates that it is correctly positioned – fig. 5.

• Do not immerse the control unit with the heating element in water – fig. 4.

• Check that the filtration and drainage switch has gone back to its original position.

• Make sure that the control unit is correctly positioned otherwise the fryer cannot function.

Filling the bowl

• Fill the bowl with oil – fig. 6.
• Never exceed the maximum level indicated in the bowl – fig. 6.
• For best results use oil recommended for deep frying: vegetable oil, corn oil, canola oil. If using sunflower oil ensure the oil is changed every 5 uses. Oils which should NOT be used under any circumstances and may cause overflowing/smoking/risk of fire are: ground nut oil, soya oil, olive oil, lard or drippings.
• If you use solid vegetable oil, cut it into small pieces and melt it in a separate pan – fig. 7. Pour the melted oil into the fryer bowl. Never melt solid fat on the heating element or in the frying basket.
• Do not mix different types of oil or fat as this may cause the oil to overflow.
• The oil/fat level must always be between the min. and max. markers, stamped inside the bowl. Check this each time prior to cooking and add some of the same type of oil if necessary.

Loading the basket

• Remove excess water, ice or frost from food.
• Do not pour the food directly from the frozen bag in the fryer.
• Fill the basket before placing it in the deep fryer (see the cooking tables page 16) – fig. 8. Do not overfill the basket. Reduce the quantities for frozen foods.
• Cooking tips : Cut food into similar-sized pieces so that they cook evenly. Avoid using pieces that are too thick. For crispier frozen fries, wash them in cold water and dry them carefully. Not all frozen foods are ready to use, check the manufacturer’s instructions.

Frying process

• Place the Oil box switch button on the Fry position – fig. 9.

• After the bowl has been filled with oil, plug in the fryer without the frying basket – fig. 10. Turn on the fryer. The power indicator light will switch on. Turn the adjustable thermostat to the desired temperature (see cooking table: page 16) .

• Put the lid on

• The fryer will now start to heat the oil.

• Do not touch hot surfaces when cooking – fig.15.

• Note : the ready indicator light will switch on when the desired temperature is reached.

COOKING
Lowering the basket

• After the ready indicator light switches on, remove the lid, place and lower the basket slowly into the oil. Plunging the basket too rapidly in the oil may cause it to overflow.
• Watch cooking for 1 minute before putting the lid on.
• To avoid any risk of burns, never put your hands above the filtration zone.

At the end of cooking time

• Move the thermostat down to the lowest setting.
• Raise the lid using the lid handle and refrain from letting any condensation drip into the hot oil bowl.
• Place the basket on the edge of the bowl with basket hanging clips.
• Let the food drain.
• Remove the basket. Serve the food.
• Replace the lid when the fryer is not in use.
• To use a second time, correct the oil level if necessary.

Switching off the deep fryer

• When you have finished frying, move the thermostat down to the lowest setting, press off button, then unplug the fryer.
• For:filtration action, turn the button to the automatic oil:filtration position – fig. 12.
• Allow the oil to cool completely in the fryer (approx. 2 hours).
• Move the fryer using the carrying handles.

Table of cooking times

• The cooking times are a guide only, they may vary depending on the size of the food, the amount of the food, individual preferences and the voltage.
• Cooking tips: For the best results, use the traditional French method of frying homemade French fries :
  • first frying at 320°F / 160°C
  • second frying at 374°F / 190°C.
• When cooking battered food and doughnuts, remove the wire basket to prevent food from sticking to it and use tongs to slowly lower the food into the hot oil.

CLEANING AND MAINTENANCE

• For your safety, the appliance automatically drains all kinds of oils ( or solid shortenings) when it is cool enough (approximately 2 hours after the last cooking).
  When finished cooking, turn the oil box control switch to the Automatic oil filtration position – fig.12-13. Once the filtration is finished, you can store the oil box :

  • In the appliance: Turn the oil box control switch to the Fry position. The appliance must be carried and transported flat.
  • Out of the appliance : Turn the oil box control switch to the oil box position and then remove it – fig.14. Transport it with care.

• To re-use the oil, remove the oil box with care.

• Unscrew the oil box cap and empty the oil in the fryer bowl.

• For the solid shortening, remove the lid from the oil box. Turn the oil box over and press it to loosen the shortening. Cut it into pieces and melt it in a separate pan. Then, pour it into the bowl.

• Insert the empty oil box in the fryer, with its lid and cap.

• Place the oil box control switch on the fry position.

• 100% dishwasher safe (except the control unit)

• The lid, bowl, housing, frying basket and the oil box are dishwasher safe.

• Make sure that the oil container is empty before draining the fryer.

• Carry the oil box with both hands.

• Store it in a cool dry place away from the light.

• Never put the oil box in the microwave oven.

• Do not pour used oil in the sink.

• Before filling the fryer bowl, always check to ensure the filtration and drainage button of the fryer is in the right position.

• Check periodically for looseness and retighten screws or nuts of the bodys and lids handles with adapted tool.

• CAUTION: Overtightening can result in stripping of screws or nuts cracking of handles.

IMPORTANT

In order to avoid water being added to the oil :

• Please respect carefully the safety and usage recommendations contained in the Instructions For Use.
• Use your fryer away from water splashes.
• Dry the food thoroughly before cooking.
• Make sure that the lid filter is clean, so as to always allow the free circulation of the steam.
• When you open the lid, be careful not to let the condensation drops fall into the oil.
• Ensure that the oil box is clean and dry before draining and filtering the oil.
• Never store the oil box full of oil in the refrigerator or freezer.
• Always store the oil box in the horizontal position, with lid closed, in a dry place.
• After each cleaning of the bowl, press on the filtration valve of the oil filtration system located under the bowl.
• Dry all the cleaned parts thoroughly before reassembling and storing the fryer.
• Never store your fryer outside. Choose a dry and well-ventilated place.

RESET FUNCTION

• Your appliance is equipped with an overheating security feature located in the back of the control unit.

• If you use your fryer without oil, the safety cut-off is activated and the appliance will shut off automatically. In this case, unplug the appliance and let it cool (about 15 minutes).

• After the bowl has been filled with oil, press the safety cut-off RESET button with a toothpick or similar non­metallic object – fig.16. Then, plug the appliance in.

• If the problem with the safety cut-off persists, please call our consumer service center (see details on page 19).

IF YOUR FRYER DOES NOT WORK PROPERLY

LIMITED TWO YEAR WARRANTY

 www.all-clad.com/ www.all-clad.ca

With a strong commitment to the environment, All-Clad electrical products are repairable during and after the warranty period. Before returning any defective products to the point of purchase, please call All-Clad consumer service directly at the phone
number below for repair options.
Your help to sustain the environment is appreciated!

The Warranty
This electrical product or product with batteries is guaranteed by All-Clad for a period of 2 years against any manufacturing defect in materials or workmanship, starting from the initial date of purchase.
The manufacturer’s warranty by All-Clad is an extra benefit which does not affect consumer’s Statutory Rights.
The All-Clad warranty covers all costs related to restoring the proven defective product so that it conforms to its original specifications, through the repair or replacement of any defective part and the necessary labor. At All-Clad’s choice, a replacement product may be provided instead of repairing a defective product. All-Clad’s sole obligation and your exclusive resolution under this warranty are limited to such repair or replacement.

Conditions & Exclusions
The All-Clad warranty only applies within the United States and Canada, and is valid only on presentation of a proof of purchase.
For warranty service please contact All-Clad Consumer Service using the appropriate toll free number or website listed below. A consumer service representative will personally assist you with the evaluation, repair or replacement of your product at the closest All-Clad service center.
All-Clad shall not be obliged to repair or replace any product which is not accompanied by a valid proof of purchase.
This warranty will not cover any damage which occurs as a result of misuse, negligence, failure to follow All-Clad instructions, use on current or voltage other than as stamped on the product, or a modification or unauthorized repair of the product. It also does not cover normal tear and wear, maintenance or replacement of consumable parts, and the following:

• using the wrong type of water or consumable
• scaling (any de-scaling must be carried out according to the instructions for use);
• ingress of water, dust or insects into the product;
• mechanical damages, overloading
• damages or bad results due to wrong voltage or frequency
• accidents including fire, flood, lightning, etc
• professional or commercial use
• damage to any glass or porcelain ware in the product

This warranty does not apply to any product that has been tampered with, or to damages incurred through improper use and care, faulty packaging by the owner or mishandling by any carrier.
The All-Clad manufacturer’s warranty applies only for products purchased and used in USA & Canada. Where a product is purchased in one country and then used in another one:

• The All-Clad guarantee does not apply in case of non conformity of the purchased product with the local standards, such as voltage, frequency, power plugs, or other local technical specifications.
•  The repair process for products purchased outside the country of use may require a longer time if the product is not locally sold by All-Clad.
• In cases where the product is not repairable in the new country, the All-Clad guarantee is limited to a replacement by a similar product or an alternative product at similar cost, where possible.

Consumer Statutory Rights
This All-Clad manufacturer’s warranty does not affect the statutory rights a consumer may have or those rights that cannot be excluded or limited, nor rights against the retailer from which the consumer purchased the product. This warranty gives a consumer specific legal rights, and the consumer may also have other legal rights which vary from State to State or Country to Country or Province to Province. The consumer may assert any such rights at his sole discretion.

Additional information
Accessories, Consumables and end-user replaceable parts can be purchased, if locally available, as described in All-Clad internet site.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>