JVC KW-R935BTS Digital Media CD Receiver Instruction Manual

JVC KW-R935BTS Digital Media CD Receiver

Product Information

The KW-R935BTS / KW-R930BTS is a CD receiver manufactured by JVC KENWOOD Corporation. It is a high-quality audio device designed to provide a great listening experience in your vehicle. The receiver features advanced technology and user-friendly controls, allowing you to easily navigate through various audio sources and settings.

The KW-X830BTS / KW-SX83BTS is a digital media receiver also manufactured by JVC KENWOOD Corporation. It offers similar features to the CD receiver but is specifically designed to play digital media files from various sources such as USB drives, smartphones, and other compatible devices.

Specifications:

• Model: KW-R935BTS / KW-R930BTS
• Type: CD Receiver
• Model: KW-X830BTS / KW-SX83BTS
• Type: Digital Media Receiver

Product Usage Instructions

1. Installation

Before using the receiver, it needs to be properly installed in your vehicle. Follow these steps:

1. Identify a suitable location in your vehicle’s dashboard for the receiver.
2. Disconnect the negative terminal of your vehicle’s battery to prevent any electrical mishaps.
3. Remove the existing stereo or receiver from the dashboard.
4. Mount the KW-R935BTS / KW-R930BTS or KW-X830BTS / KW-SX83BTS receiver into the vacant slot in the dashboard.
5. Connect the wiring harness and antenna cable to the appropriate ports on the receiver.
6. Securely fasten the receiver in place using the mounting brackets and screws provided.
7. Reconnect the negative terminal of the vehicle’s battery.

2. Powering On

Once the receiver is installed, follow these steps to power it on:

1. Start your vehicle’s engine.
2. Press the power button located on the front panel of the receiver.
3. The receiver will start up and display the JVC KENWOOD logo.

3. Audio Source Selection

The receiver supports various audio sources. To select an audio source, follow these steps:

1. Press the source button located on the front panel of the receiver.
2. Use the navigation buttons or the rotary dial to scroll through the available sources such as CD, USB, Bluetooth, AUX, etc.
3. Select the desired source by pressing the corresponding button or pressing the rotary dial.

4. Adjusting Audio Settings

The receiver allows you to customize the audio settings according to your preferences. Follow these steps to adjust the audio settings:

1. Press the menu button located on the front panel of the receiver.
2. Navigate through the menu options using the navigation buttons or the rotary dial.
3. Select the “Audio” or “Sound” option and press the corresponding button or press the rotary dial.
4. Adjust settings such as bass, treble, balance, fader, and equalizer to your liking.
5. Save the changes and exit the menu.

5. Bluetooth Connectivity

The receiver is equipped with Bluetooth technology, allowing you to connect your smartphone or other compatible devices wirelessly.
To pair your device, follow these steps:

1. Enable Bluetooth on your smartphone or device.
2. Press the Bluetooth button on the front panel of the receiver.
3. Select “Pairing” or “Connect” on the receiver’s display.
4. On your smartphone or device, search for available Bluetooth devices and select the receiver from the list.
5. Enter the PIN displayed on the receiver if prompted.
6. Once connected, you can stream audio wirelessly from your device to the receiver.

FAQs

• Q: How do I change the radio station?
  • A: To change the radio station, press the “Tune” button on the front panel of the receiver. Use the navigation buttons or the rotary dial to tune to a specific frequency or search for available stations.
• Q: Can I use a USB drive to play music?
  • A: Yes, the receiver supports USB playback. Simply connect your USB drive to the USB port on the front panel of the receiver. Use the source button to select USB as the audio source, and you can navigate through your music files using the navigation buttons or the rotary dial.
• Q: How do I adjust the volume?
  • A: To adjust the volume, use the volume knob located on the front panel of the receiver. Turn it clockwise to increase the volume and counterclockwise to decrease the volume.
• Q: Is there a remote control included?
  • A: Yes, the receiver comes with a remote control that allows you to conveniently control the various functions and settings from a distance.
• Q: Is there a warranty for the product?
  • A: Yes, the product comes with a limited warranty. Please refer to the warranty information provided in the user manual or contact the manufacturer for further details.

KW-R935BTS /
KW-R930BTS
CD RECEIVER
INSTRUCTION MANUAL
RÉCEPTEUR CD
MANUEL D’INSTRUCTIONS
RECEPTOR CON CD
MANUAL DE INSTRUCCIONES

KW-X830BTS /
KW-SX83BTS
DIGITAL MEDIA RECEIVER
INSTRUCTION MANUAL
RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE
MANUEL D’INSTRUCTIONS
RECEPTOR DE MEDIOS DIGITALES
MANUAL DE INSTRUCCIONES

ENGLISH FRANÇAIS ESPAÑOL

For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No.
B5A-2137-10 [K]

KW-R935BTS/KW-R930BTS:
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.
JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
Location : Top Plate
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos)
Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos. Los equipos eléctricos y electrónicos al final de la vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales correspondientes. Póngase en contacto con su administración local para obtener información sobre el punto de recogida más cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos y evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.

FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. · Consult the dealer or an experienced radio/TV technician for help.
Informação sobre a eliminação de pilhas Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada ao revendedor ou entidade autorizada para que a mesma seja devolvida ao fabricante ou importador. A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos naturais ao mesmo tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio ambiente.
CALIFORNIA, USA ONLY This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material–special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

i

IC (Industry Canada) Notice This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired
operation of the device.

Note de IC (Industrie Canada) Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.

Contains Bluetooth Module FCC ID: IC ID:

ZWY8811X 12033A-8811X

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

CAUTION This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
ATTENTION Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d’exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée comme conforme sans évaluation de l’exposition maximale autorisée (MPE). Cependant, il est souhaitable qu’il devrait être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.
Para cumplimiento de la IFT: “La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada”

ii

SOFTWARE LICENSE AGREEMENT
The software embedded in the Product (hereinafter the “Licensed Software”) provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software.
The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement. This Agreement shall be deemed completed at the time the User (hereinafter the “User”) initially used the Product in which the “Licensed Software” is embedded.
The Licensed Software may include the software which has been licensed to the Licensor directly or indirectly from any third party. In such case, some third parties require the Users to follow their conditions for use separately from this Software License Agreement. Such software shall not be subject to this Agreement, and the Users are urged to read the “Important Notice concerning the Software” to be provided separately below.
Article 1 General Provision
The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. (the country where the User bought the Product(hereinafter the “Country”)
Article 2 License
1. The license granted under this Agreement shall be the right to use the Licensed Software in the Product.
2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed Software and any related documents, whether in whole or in part.
3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.
4. The User shall use the Licensed Software according to the directions described in the operation manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License
1. When the User transfers the Product, it may also transfer the license to use the Licensed Software embedded in the Product (including any related materials, updates and upgrades) on condition that no original, copies or related materials continue in the possession of the User, and that the User shall cause the transferee to comply with this Software License Agreement.
2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code analysis works in connection with the Licensed Software.
Article 4 Right pertaining to the Licensed Software
Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the “Original Rightholder”), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents.
Article 5 Indemnification of Licensor
1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User or any third party due to the exercise of the license granted to the User under this Agreement, unless otherwise restricted by law.
2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with certain objective of the Licensed Software.
Article 6 Liability to Third Party
If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any other intellectual property right that was caused by the User’s use of the Licensed Software, the User shall settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any inconvenience it may cause.
Article 7 Confidentiality
The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof or any other information to be granted under this Agreement, as well as the conditions of this Agreement as has not yet entered the public domain, and shall not disclose or divulge the same to any third party without approval of the Licensor.

iii

Article 8 Termination
In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
Article 9 Destruction of the Licensed Software
If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination.
Article 10 Protection of Copyright
1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the ownership of the User.
2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the copyright and other intellectual property rights.
Article 11 Export Restriction
1. It is prohibited to export the Licensed Software and any related documents outside the country of the User (including transmission thereof outside the country of the User via Internet of other communication tools).
2. The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of User and any other countries.
3. The User shall agree that the software will be subject to any and all applicable international and domestic laws (including the export control regulation of the country of User and any other countries, and any restrictions concerning the end-users, the use by end-users and importing countries to be provided by the country of User and any other countries, and any other governmental authorities).

Important Notice concerning the Software
-jansson
Copyright (c) 2009-2012 Petri Lehtinen petri@digip.org
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Article 12 Miscellaneous
1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions shall continue in force. 2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of this Agreement shall be provided or
settled upon good-faith consultation between the Licensor and the User. 3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and any dispute arising from, and
relating to the rights and obligations under, this Agreement shall be submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

iv

CONTENTS

BEFORE USE

2

BASICS

3

GETTING STARTED

4

1 Cancel the demonstration

2 Set the clock and date

3 Set the basic settings

RADIO

5

CD/USB/iPod/ANDROID

7

Pandora®

9

iHeartRadio®

10

Spotify

11

SiriusXM® Radio

12

BLUETOOTH®

15

AUX

23

AUDIO SETTINGS

23

DISPLAY SETTINGS

29

REFERENCES

30

Maintenance

More information

TROUBLESHOOTING

33

SPECIFICATIONS

36

INSTALLATION/

CONNECTION

37

2 ENGLISH

BEFORE USE

IMPORTANT · To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe
Warning and Caution in this manual. · Please keep the manual in a safe and accessible place for future reference.
WARNING · Do not operate any function that takes your attention away from safe driving. · Do not ingest the battery, Chemical Burn Hazard
The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Caution Volume setting: · Adjust the volume so that you can hear sounds outside the car to prevent accidents. · Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.
General: · Avoid using the external device if it might hinder safe driving. · Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data. · Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit. · For KW-R935BTS/KW-R930BTS: If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to
evaporate. · Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected
( 39). Turn off the unit when parking at a low ceiling area.
Remote control (RM-RK52): · Do not leave the remote control in hot places such as on the dashboard. · The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type. · The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
How to read this manual · Operations are explained mainly using buttons on the faceplate of KW-R935BTS. · English indications are used for the purpose of explanation. You can select the display language from the menu. ( 5) · [XX] indicates the selected items. · ( XX) indicates references are available on the stated page.

BASICS
Faceplate
Eject button and loading slot

How to reset

Remote control (RM-RK52) This unit can be remotely controlled with an optionally purchased remote control.
Remote sensor (Do not expose to bright sunlight.)

Display window

Pull out the insulation sheet when using for the first time.
How to replace the battery

To Turn on the power
Adjust the volume

Volume knob

KW-R935BTS: USB cable from the rear of the unit

On the faceplate

Press

.

· Press and hold to turn off the power.

Turn the volume knob.

Select a source
Change the display information

Press the volume knob to mute the sound or pause playback. · Press again to cancel. The volume level returns to the previous
level before muting or pause.

· Press · Press
Press

repeatedly. , then turn the volume knob within 2 seconds.
repeatedly. ( 32)

On the remote control

( Not available )

Press

or

· Press and hold

volume to 15.

. to continuously increase the

Press to mute the sound or pause playback. · Press again to cancel. The volume level returns to
the previous level before muting or pause.
Press SOURCE repeatedly.

( Not available )

ENGLISH 3

GETTING STARTED

To set the date
7 Turn the volume knob to select [DATE SET], then press the knob. 8 Turn the volume knob to make the settings, then press the knob.
Day Month Year

9 Press

to exit.

To return to the previous setting item, press

.

1 Cancel the demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], 5), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1 Press the volume knob. [YES] is selected for the initial setup.
2 Press the volume knob again. “DEMO OFF” appears.

2 Set the clock and date

1 Press and hold

.

2 Turn the volume knob to select [CLOCK], then press the knob.

To adjust the clock 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob.
Hour Minute 5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob.

3 Set the basic settings

1 Press and hold

.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press

to exit.

To return to the previous setting item, press

.

Default: XX

SYSTEM KEY BEEP

(Not applicable when 3-way crossover is selected.) ON: Activates the keypress tone. ; OFF: Deactivates.

SOURCE SELECT AM SRC PANDORA SRC
IHEART SRC
SPOTIFY SRC
BUILT-IN AUX*

ON: Enables AM in source selection. ; OFF: Disables. ( 5)
ON: Enables PANDORA FRONT/PANDORA REAR/PANDORA in source selection. ; OFF: Disables. ( 9)
ON: Enables IHEARTRADIO-F/IHEARTRADIO-R/IHEARTRADIO in source selection. ; OFF: Disables. ( 10)
ON: Enables SPOTIFY FRONT/SPOTIFY REAR/SPOTIFY in source selection. ; OFF: Disables. ( 11)
ON: Enables AUX in source selection. ; OFF: Disables. ( 23)

• Not displayed when the corresponding source is selected.

4 ENGLISH

GETTING STARTED

F/W UPDATE

UPDATE SYSTEM

F/W UP xxxx

YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, visit http://www.jvc.net/cs/car/.

FACTORY RESET

YES: Resets the settings to default (except the stored station). ; NO: Cancels.

CLOCK

TIME SYNC

ON: The clock time is automatically set using the Clock Time (CT) data in FM Radio Broadcast Data System signal. ; OFF: Cancels.

CLOCK DISPLAY

ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels.

ENGLISH ESPANOL

Select the display language for menu and music information if applicable. By default, ENGLISH is selected.

RADIO

“STEREO” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Search for a station

1 Press

repeatedly to select FM or AM.

2 Press

(or press on the remote control) to search for a station

automatically.

(or)

Press and hold

(or press and hold on the remote control) until “M”

flashes, then press repeatedly to search for a station manually.

Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station While listening to a station…. Press and hold one of the number buttons (1 to 6).
(or) 1 Press and hold the volume knob until “PRESET MODE” flashes. 2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and “MEMORY” appears.
ENGLISH 5

RADIO

Select a stored station

Press one of the number buttons (1 to 6).

(or)

1 Press

.

2 Turn the volume knob to select a preset number, then press the

knob.

Other settings

1 Press and hold

.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press

to exit.

To return to the previous setting item, press

.

TUNER SETTING RADIO TIMER

Default: XX
Turns on the radio at a specific time regardless of the current source. 1 ONCE/DAILY/WEEKLY/OFF: Select how often the timer will be
turned on. 2 FM/AM/SIRIUS XM1: Select the source. 3 01 to 18 (for FM/SIRIUS XM)/01 to 06 (for AM): Select the preset
station. 4 Set the activation day2 and time. “M” lights up when complete.
Radio Timer will not activate for the following cases. · The unit is turned off. · [OFF] is selected for [AM SRC] in [SOURCE SELECT] after Radio Timer
for AM is selected. ( 4)

SSM

SSM 01­06 /SSM 07­12 /SSM 13­18: Automatically presets up to 18

stations for FM. “SSM” stops flashing when the first 6 stations are stored.

Select SSM 07­12/SSM 13­18 to store the following 12 stations.

IF BAND

AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises from adjacent FM stations, but sound quality will not be degraded and the stereo effect will remain.

MONO SET

ON: Improves the FM reception, but the stereo effect will be lost. ; OFF: Cancels.

AREA

N.AMERICA: For North/Central/South America, AM/FM intervals:

10 kHz/200 kHz. ; S.AMERICA: For some South American countries, AM/

FM intervals: 10 kHz/50 kHz. ; EUROPE: For any other areas, AM/FM

intervals: 9 kHz/50 kHz.

PTY SEARCH*3

Select a PTY code (see below). If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in.

1 Selectable only when SiriusXM Vehicle Tuner is connected. ( 12)
2 Selectable only when [ONCE] or [WEEKLY] is selected in step 1. *3 Only for FM source.

PTY code NEWS, INFORM (information), SPORTS, TALK, ROCK, CLS ROCK (classic rock), ADLT HIT (adult hits), SOFT RCK (softrock), TOP 40, COUNTRY, OLDIES, SOFT, NOSTALGA (nostalgia), JAZZ, CLASSICL (classical), R & B (rhythm and blues), SOFT R&B (soft rhythm and blues), LANGUAGE, REL MUSC (religious music), REL TALK (religious talk), PERSNLTY (personality), PUBLIC, COLLEGE, HABL ESP (Spanish talk), MUSC ESP (Spanish music), HIP HOP, WEATHER

6 ENGLISH

CD/USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts.

CD Eject disc

Label side

Selectable source: · KW-R935BTS: CD/USB FRONT/
USB REAR/iPod FRONT/ iPod REAR/ANDROID FRONT/ ANDROID REAR · KW-R930BTS: CD/USB/iPod USB/ ANDROID · KW-X830BTS/KW-SX83BTS: USB/ iPod USB/ANDROID

USB input terminal USB

USB 2.0 cable*1 (commercially available)

KW-R935BTS: You can also connect to the USB cable from the rear of the unit.

iPod/iPhone
Accessory of the iPod/ iPhone*1

ANDROID*2

USB cable*1 (commercially available)

To

On the faceplate

On the remote control

Reverse/Fast-forward*3 Press and hold

.

Press and hold .

Select a track/file

Press

.

Press .

Select a folder*4

Press

.

Press .

Repeat play*5

Press

repeatedly.

TRACK REPEAT/ALL REPEAT

: Audio CD

TRACK REPEAT/FOLDER REPEAT/ALL REPEAT : MP3/WMA/AAC/WAV/FLAC file

ONE REPEAT/ALL REPEAT/REPEAT OFF : iPod or ANDROID

Random play*5

Press

repeatedly.

ALL RANDOM/RANDOM OFF

: Audio CD

FOLDER RANDOM/ALL RANDOM/RANDOM OFF : MP3/WMA/AAC/WAV/FLAC

file

SONG RANDOM/ALL RANDOM/RANDOM OFF : iPod or ANDROID

1 Do not leave the cable inside the car when not using. 2 When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to
install the application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting. For more information, visit http://www.jvc.net/cs/car/. 3 For ANDROID: Applicable only when [AUTO MODE] is selected. ( 8) 4 For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID. *5 For iPod/ANDROID: Applicable only when [HEAD MODE]/[AUTO MODE] is selected. ( 8)
ENGLISH 7

CD/USB/iPod/ANDROID

Select control mode
While in iPod FRONT/iPod REAR/iPod USB source, press repeatedly. HEAD MODE: Control iPod from this unit. IPHONE MODE: Control iPod using the iPod itself. However, you can still
play/pause or file skip from this unit.
While in ANDROID FRONT/ANDROID REAR/ANDROID source, press repeatedly.
AUTO MODE: Control Android device from this unit via JVC MUSIC PLAY application installed in the Android device.
AUDIO MODE: Control Android device using the Android device itself via other media player applications installed in the Android device. However, you can still play/pause or file skip from this unit.

Select music drive

While in USB FRONT/USB REAR/USB source, press

repeatedly.

Stored songs in the following drive will be played back. · Selected internal or external memory of a smartphone (Mass Storage
Class). · Selected drive of a multiple drives device.

Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver’s operations from the iPhone/iPod (via USB input terminal).
Preparation: Install the latest version of JVC Remote application on your device before connecting. For more information, visit http://www.jvc.net/cs/car/.
You can make the settings in the same way as connection via Bluetooth. ( 21)

Select a file from a folder/list

For iPod/ANDROID, applicable only when [HEAD MODE]/[AUTO MODE] is selected.

1 Press

.

2 Turn the volume knob to select a folder/list, then press the knob.

3 Turn the volume knob to select a file, then press the knob.

Quick search (applicable only for CD, USB FRONT, USB REAR, USB, ANDROID FRONT, ANDROID REAR and ANDROID source) If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.

Alphabet search (applicable only for iPod FRONT, iPod REAR, iPod USB,
ANDROID FRONT, ANDROID REAR and ANDROID source) You can search for a file according to the first character.

For iPod FRONT/iPod REAR/iPod USB source

Press

or turn the volume knob quickly to select the

desired character (A to Z, 0 to 9, OTHERS).

· Select “OTHERS” if the first character is other than A to Z, 0 to 9.

For ANDROID FRONT/ANDROID REAR/ANDROID source

1 Press

to enter character search.

2 Turn the volume knob to select the desired character.

^A^:

Upper case letters (A to Z)

A:

Lower case letters (a to z)

-0-:

Numbers (0 to 9)

-OTHERS-: Character other than A to Z, 0 to 9

3 Press the volume knob to start searching.

· To return to the previous setting item, press

.

· To cancel, press and hold

.

8 ENGLISH

Pandora®
Preparation: Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora. · Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 4)
Start listening
1 Open the Pandora application on your device. 2 Connect your device to the USB input terminal.
USB input terminal Accessory of the iPod/iPhone*1

and/or

KW-R935BTS: You can also connect to the USB cable from the rear of the unit.

3 Press

repeatedly to select PANDORA FRONT/

PANDORA REAR/PANDORA.

Broadcast starts automatically.

To
Playback/pause
Skip a track Thumbs up or thumbs down*2

On the faceplate

Press the volume knob.

Press T.

Press

.

On the remote control Press . Press I. Press .

1 Do not leave the cable inside the car when not using. 2 If thumbs down is selected, the current track is skipped.

Create and store a new station

1 Press

.

2 Turn the volume knob to select [NEW STATION], then press the knob.

3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then

press the knob.

A new station is created based on the current song or artist.

4 Press and hold one of the number buttons (3, 4, 5 or 6) to store.

To select a stored station: Press one of the number buttons (3, 4, 5 or 6).

Search for a registered station

1 Press

.

2 Turn the volume knob to select an item, then press the knob.

[BY DATE]: According to the registered date [A-Z]: By alphabetical order

3 Turn the volume knob to select the desired station, then press the

knob.

To cancel, press and hold

.

Bookmark current song information
Press and hold the volume knob. “BOOKMARKED” appears and the information is stored to your device. · The bookmark is available on your Pandora account but not on this
unit.

ENGLISH 9

iHeartRadio®
Preparation: Install the latest version of iHeartAuto application on your device (iPhone/iPod touch), then create an account and log in to iHeartRadio. · Select [ON] for [IHEART SRC] in [SOURCE SELECT]. ( 4)
Start listening
1 Open the iHeartAuto application on your device. 2 Connect your device to the USB input terminal.
USB input terminal Accessory of the iPod/iPhone*

and/or

KW-R935BTS: You can also connect to the USB cable from the rear of the unit.

3 Press

repeatedly to select IHEARTRADIO-F/

IHEARTRADIO-R/IHEARTRADIO.

Broadcast starts automatically

• Do not leave the cable inside the car when not using.

To
Playback/pause
Skip a track for custom station
Thumbs up or thumbs down
Create a new/ custom station
Scan for live station

On the faceplate Press the volume knob. Press T.

On the remote control Press . Press I.

Press

.

Press .

Press and hold the volume knob.

( Not available )

1 Press 3 to start

2

scanning. Press 3 again to listen

( Not available )

to the station.

Search and store a station

1 Press

.

2 Turn the volume knob to select a category, then press the knob.

3 Turn the volume knob to select the desired station, then press the

knob.

When a city list appears, you can search cities in alphabetical order by

turning the volume knob quickly.

To cancel, press and hold

.

To store a station: Press and hold one of the number buttons (4, 5 or 6). To select a stored station: Press one of the number buttons (4, 5 or 6).

10 ENGLISH

Spotify

Preparation: Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify. · Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 4)
Start listening
1 Open the Spotify application on your device. 2 Connect your device to the USB input terminal.
USB input terminal Accessory of the iPod/iPhone*

To Repeat play3
Random play3

On the faceplate

Press

repeatedly.

ALL REPEAT, ONE REPEAT*1, REPEAT OFF

Press

repeatedly.*1

ALL RANDOM, RANDOM OFF

On the remote control ( Not available ) ( Not available )

1 Available for premium account users only. 2 This feature is available for tracks in Radio only. If thumbs down is selected, the current
track is skipped. *3 Available for tracks in Playlists only.

and/or

KW-R935BTS: You can also connect to the USB cable from the rear of the unit.

3 Press

repeatedly to select SPOTIFY FRONT/

SPOTIFY REAR/SPOTIFY.

Broadcast starts automatically

• Do not leave the cable inside the car when not using.

Save favorite song information
While listening to the Radio on Spotify…
Press and hold the volume knob. “SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.
To unsave, repeat the same procedure. “REMOVED” appears and the information is removed from “Your Music” or “Your Library” on your Spotify account.

To
Playback/pause
Skip a track Thumbs up or thumbs down*2 Start radio

On the faceplate

Press the volume knob.

Press S*1 / T.

Press

.

Press and hold 6.

On the remote control Press . Press H*1 / I. Press .
( Not available )

Search for a song or station

1 Press

.

2 Turn the volume knob to select a list type, then press the knob.

The list types displayed differ depending on the information sent

from Spotify.

3 Turn the volume knob to select the desired song or station, then

press the knob.

You can browse through the list quickly by turning the volume knob

quickly.

To cancel, press and hold

.

ENGLISH 11

SiriusXM® Radio
Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit <www.siriusxm.com>.
Preparation: 1 Connect the optional SiriusXM Vehicle Tuner
(commercially available).
Antenna

Expansion port on the rear panel

SiriusXM Vehicle Tuner

2 Check your Radio ID for activation.

The SiriusXM Radio ID is required for activation and

can be found by tuning to Channel 0 as well as on

the label found on the SiriusXM Vehicle Tuner and

its packaging.

The Radio ID does not include the letters I, O, S or F.

3 Activate the subscription.

For users in the U.S.A.:

Online: Go to <www.siriusxm.com>

Phone: Call 1-866-635-2349

For users in Canada:

Online: Go to <www.siriusxm.ca/activatexm>

Phone: Call 1-877-438-9677

4 Press

repeatedly to select SIRIUS XM

to start updating.

Start listening

1 Press

repeatedly to select SIRIUS XM.

2 Press

.

” ” lights up.

3 Turn the volume knob to select a CATEGORY, then press the knob.

4 Turn the volume knob to select a category from the list, then press the knob.

If “ALL CHANNEL” is selected, all the available channels will be shown.

5 Turn the volume knob to select a channel, then press the knob.

(or)

Press

to search for a channel manually.

· Pressing and holding

changes the channel rapidly.

If a locked channel or a mature channel is selected, a pass code input screen appears. Enter the pass code to receive the channel. ( 14)

Settings in memory

You can store up to 18 channels.

Store a channel
While listening to a channel…. Press and hold one of the number buttons (1 to 6).
(or) 1 Press and hold the volume knob until “PRESET MODE” flashes. 2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and “MEMORY” appears.

Select a stored channel

Press one of the number buttons (1 to 6).

(or)

1 Press

.

2 Turn the volume knob to select PRESET, then press the knob.

3 Turn the volume knob to select a preset number, then press the knob.

(or)

Press

on the remote control.

12 ENGLISH

SiriusXM® Radio

SiriusXM ReplayTM
While listening to a channel…. 1 Press the volume knob.
” ” lights up and the unit memorizes this paused position. 2 Press the volume knob to start Replay.
Replay starts from the paused position in step 1.

During Replay… To
Playback/pause
Skip backward/ forward Rewind/Fast-forward
Go to Live and exit Replay

On the faceplate

Press the volume knob.

Press

.

On the remote control Press . Press .

Press and hold

. Press and hold .

Press and hold the volume knob.

Press and hold .

1 Press

.

2 Turn the volume knob

to select LIVE, then

press the knob.

SmartFavorites and TuneStartTM
User preset channels are initially assigned as the SmartFavorites channels. SmartFavorite channel is available with SXV200 or later SiriusXM tuner models. The SiriusXM Vehicle Tuner automatically buffers the broadcast audio content of the SmartFavorites channels in the background.
Using SXV200: This unit can assign a maximum of 6 SmartFavorites channels. If you try to assign the 7th channel, an error beep tone will be heard. Initially, preset channels 1 to 6 are assigned as SmartFavorites.

Using SiriusXM tuner models later than SXV200: This unit can assign a maximum of 18 SmartFavorites channels. Initially, all preset channels are assigned as SmartFavorites.

• · ” ” appears at the last character of the channel name for the SmartFavorites channels.

When you select a SmartFavorite channel, you can rewind and replay up to 30 minutes of any of the missed news, talk, sports or music content. · Playback starts from the beginning of the song if [TUNE START] is set
to [ON] ( 14) for most music channels stored as a SmartFavorite.

To

On the faceplate

Select a stored SmartFavorite channel

Press one of the number buttons (1 to 6).

1 Press

.

2 Turn the volume knob to select PRESET, then

press the knob.

3 Turn the volume knob to select a preset

number, then press the knob.

Cancel SmartFavorites channels
Reassign SmartFavorites channels

1 Press

.

2 Turn the volume knob to select PRESET, then

press the knob.

3 Turn the volume knob to select a preset

number, then press and hold the knob.

*” ” is removed from the last character.

Repeat steps 1 to 3 of cancelling SmartFavorites

channels.

*” ” appears at the last character.

ENGLISH 13

SiriusXM® Radio

TuneScanTM

You can get a short preview of the songs that you have missed on each of your SmartFavorites music channels or currently tuned music channel.

1 Press

.

2 Turn the volume knob to select TUNE SCAN, then press the knob.

Scanning start for the first 6 seconds of the recorded music contents.

· To listen to the current song, press the volume knob to stop scanning.

The unit continues playing the current song.

· To select the previous/next song, press

.

· To cancel scanning, press and hold the volume knob. Playback returns

to the channel before you entered TuneScan.

SiriusXM settings

1 Press and hold

.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press

to exit.

To return to the previous setting item, press

.

SIRIUS XM CHANNEL LOCK

Default: XX

To unlock settings:

1 Turn the volume knob to select a number.

2 Press

to move to the entry position.

3 Repeat steps 1 and 2 to enter the current pass code.

(Initial pass code is 0000.)

4 Press the volume knob to confirm.

CODE SET

1 Press the volume knob to enter [NEW CODE].

2 Turn the volume knob to select a number.

3 Press

to move to the entry position.

4 Repeat steps 2 and 3 to enter a new 4-digit pass code.

5 Press the volume knob to confirm.

6 Repeat steps 2 to 5 to reconfirm the pass code.

· Make a note of the new pass code to enter channel lock settings

for next time.

LOCK SETTING

MATURE CH: Selects the SiriusXM-defined lock setting. ; USER DEFINED: Selects the individual channels the user wants to lock. ; OFF: Cancels.

CHANNEL EDIT*1

1 Turn the volume knob to select a category, then press the knob.

2 Turn the volume knob to select a channel you want to lock, then

press the knob.

“L” appears in front of the channel number.

3 Press and hold

to exit.

CHANNEL CLEAR*1 YES: Clears all the locked channels. ; NO: Cancels.

TUNE START*2

ON: All qualified music channels in the SmartFavorites will start playback from the beginning of the song. ; OFF: Cancels.

SIGNAL LEVEL

Shows the strength (NO SIGNAL/WEAK/GOOD/STRONG) of the current received signal.

BUFFER USAGE

Shows the memory usage (0% to 100%) for Replay buffer.

SXM RESET

YES: Resets stored channel and lock setting to default. ; NO: Cancels.

1 Displayed only when [USER DEFINED] is selected. 2 Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later that supports
SmartFavorites.

14 ENGLISH

BLUETOOTH

BLUETOOTH — Connection
Supported Bluetooth profiles ­ Hands-Free Profile (HFP) ­ Advanced Audio Distribution Profile (A2DP) ­ Audio/Video Remote Control Profile (AVRCP) ­ Serial Port Profile (SPP) ­ Phonebook Access Profile (PBAP) Supported Bluetooth codecs ­ Sub Band Codec (SBC) ­ Advanced Audio Coding (AAC)
Connect the microphone
MIC (microphone input terminal)
Microphone (supplied)
Rear panel

Adjust the microphone angle

Secure using cord clamps (not supplied) if necessary.

Pair and connect a Bluetooth device for the first time

1 Press

to turn on the unit.

2 Search and select “KW-R9 BTS”/”KW-X8 BTS”/”KW-SX8 BTS” on the Bluetooth

device.

“BT PAIRING” flashes on the display.

· For some Bluetooth devices, you may need to enter the Personal Identification Number

(PIN) code immediately after searching.

3 Perform (A) or (B) depending on what appears on the display.

For some Bluetooth devices, pairing sequence may vary from the steps described below.

(A) “[Device Name]” “XXXXXX” “VOL ­ YES” “BACK ­ NO”

“XXXXXX” is a 6-digit passkey randomly generated during each pairing.

Ensure that the passkeys appear on the unit and Bluetooth device are the same.

Press the volume knob to confirm the passkey.

Operate the Bluetooth device to confirm the passkey.

(B) “[Device Name]” “VOL ­ YES” “BACK ­ NO”

Press the volume knob to start pairing.

· If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code “0000” into the

Bluetooth device.

You can change to a desired PIN code before pairing. ( 19)

· If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.

“PAIRING COMPLETED” appears when pairing is completed and ” ” will light up when the Bluetooth connection is established.

· This unit supports Secure Simple Pairing (SSP). · Up to five devices can be registered (paired) in total. · Once the pairing is completed, the Bluetooth device will remain registered in the unit even if
you reset the unit. To delete the paired device, 19, [DEVICE DELETE]. · A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at
any time. However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. ( 20) · Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually. · Refer to the instruction manual of the Bluetooth device for more information.

ENGLISH 15

BLUETOOTH®
Auto Pairing
When you connect iPhone/iPod touch/ Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated.

BLUETOOTH — Mobile phone

Press the volume knob to pair once you have confirmed the device name.

Automatic pairing request is activated only if: ­ Bluetooth function of the connected device is
turned on. ­ [AUTO PAIRING] is set to [ON]. ( 19) ­ JVC MUSIC PLAY application is installed on
the Android device ( 7) and [AUTO MODE] is selected ( 8).

Receive a call
When there is an incoming call: · The buttons will blink in the color you have selected in [RING COLOR]. ( 17) · The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 17)
During a call: · The buttons stop blinking and illuminate in the color you have selected in [RING COLOR]. ( 17) · If you turn off the unit, the Bluetooth connection is disconnected.

The following operations may differ or not available depending on the connected phone.

To First incoming call…
Answer a call Reject a call
End a call

On the faceplate

On the remote control

Press

or the volume knob. Press

.

Press and hold

or the

Press and hold

.

volume knob.

Press and hold

or the

Press and hold

.

volume knob.

16 ENGLISH

BLUETOOTH®

To

On the faceplate

While talking on the first incoming call…

Answer another incoming Press call and hold the current knob. call

or the volume

Reject another incoming Press and hold

or

call

the volume knob.

While having two active calls…

End current call and activate held call

Press and hold

or

the volume knob.

Swap between the current call and held call
Adjust the phone volume*1 [00] to [35] (Default: [15])

Press .
Turn the volume knob during a call.

Switch between hands-free Press and private talk modes*3

during a call.

On the remote control

( Not available ) ( Not available )

Press and hold .

( Not available )

Press

*2 or

during a call.

( Not available )

*1 This adjustment will not affect the volume of the other sources.

*2 Press and hold

to continuously increase the volume to 15.

*3 Operations may vary according to the connected Bluetooth device.

Improve the voice quality

While talking on the phone….

1 Press and hold

.

2 Turn the volume knob to select an item (see the following table), then press

the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press

to exit.

To return to the previous setting item, press

.

MIC GAIN NR LEVEL ECHO CANCEL

Default: XX
LEVEL ­10 to LEVEL +10 (LEVEL ­04): The sensitivity of the microphone increases as the number increased.
LEVEL ­05 to LEVEL +05 (LEVEL 00): Adjust the noise reduction level until the least noise is being heard during a phone conversation.
LEVEL ­05 to LEVEL +05 (LEVEL 00): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation.

Make the settings for receiving a call

1 Press

to enter Bluetooth mode.

2 Turn the volume knob to select an item (see the following

table), then press the knob.

3 Repeat step 2 until the desired item is selected or

activated.

To return to the previous setting item, press

.

Default: XX

SETTINGS AUTO ANSWER RING COLOR

BATT/SIGNAL*

01 SEC to 30 SEC: The unit answers incoming call automatically in the selected time (in seconds). ; OFF: Cancels.
COLOR 01 to COLOR 49 (COLOR 08): Selects the light color for the buttons as notification when there is an incoming call and during a call. ; OFF: Cancels.
AUTO: Shows the strength of the battery and signal when the unit detects a Bluetooth device and the Bluetooth device is connected. ; OFF: Cancels.

• Functionality depends on the type of the phone used.

ENGLISH 17

BLUETOOTH®

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

1 Press

to enter Bluetooth mode.

“(First device name)” appears.

· If two Bluetooth phones are connected, press

again to switch to another

phone.

“(Second device name)” appears.

2 Turn the volume knob to select an item (see the following table), then press the

knob.

3 Repeat step 2 until the desired item is selected/activated or follow the instructions

stated on the selected item.

To return to the previous setting item, press

.

RECENT CALL

(Applicable only if the phone supports PBAP.) 1 Press the volume knob to select a name or a phone number.
· “<” indicates call received, “>” indicates call made, “M” indicates call missed. · “NO HISTORY” appears if there is no recorded call history or call number. 2 Press the volume knob to call.

PHONEBOOK

(Applicable only if the phone supports PBAP.)

1 Press

to select the desired letter (A to Z, 0 to 9, and OTHERS).

· “OTHERS” appears if the first character is other than A to Z, 0 to 9.

2 Turn the volume knob to select a name, then press the knob.

3 Turn the volume knob to select a phone number, then press the knob to call.

· The phonebook of the connected phone is automatically transferred to the unit when pairing. · This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as “U”.)

DIAL NUMBER 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).

2 Press

to move the entry position.

Repeat steps 1 and 2 until you finish entering the phone number.

3 Press the volume knob to call.

VOICE

Speak the name of the contact you want to call or the voice command to control the phone functions. ( Make a call using voice recognition)

18 ENGLISH

Make a call using voice recognition

1 Press and hold

to activate the connected

phone.

2 Speak the name of the contact you want to call or

the voice command to control the phone functions.

· Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.
· This unit also supports the intelligent personal assistant function of iPhone.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons

(1 to 6).

1 Press

to enter Bluetooth mode.

2 Turn the volume knob to select [RECENT CALL],

[PHONEBOOK] or [DIAL NUMBER], then press the knob.

3 Turn the volume knob to select a contact or enter a

phone number.

If a contact is selected, press the volume knob to show

the phone number.

4 Press and hold one of the number buttons (1 to 6).

“MEMORY P(selected preset number)” appears when

the contact is stored.

To erase a contact from the preset memory, select [DIAL NUMBER] in step 2 and store a blank number.

Make a call from memory

1 Press

to enter Bluetooth mode.

2 Press one of the number buttons (1 to 6).

3 Press the volume knob to call.

“NO PRESET” appears if there is no contact stored.

BLUETOOTH®

Bluetooth mode settings

1 Press and hold

.

2 Turn the volume knob to select an item (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the instructions

stated on the selected item.

4 Press

to exit.

To return to the previous setting item, press

.

Default: XX

BT MODE

PHONE SELECT Selects the phone or audio device to connect or disconnect. ” ” appears in front of the device name when connected.
AUDIO SELECT ” ” appears in front of the current playback audio device.

DEVICE DELETE 1 Turn the volume knob to select a device to delete, then press the knob. 2 Turn the volume knob to select [YES] or [NO], then press the knob.

PIN CODE EDIT (0000)

Changes the PIN code (up to 6 digits).

1 Turn the volume knob to select a number.

2 Press

to move the entry position.

Repeat steps 1 and 2 until you finish entering the PIN code.

3 Press the volume knob to confirm.

RECONNECT

ON: The unit automatically reconnect when the last connected Bluetooth device is within range. ; OFF: Cancels.

AUTO PAIRING

ON: The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android device) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; OFF: Cancels.

INITIALIZE

YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; NO: Cancels.

INFORMATION MY BT NAME: Displays the unit name (“KW-R9 BTS”/”KW-X8 BTS”/”KW- SX8 BTS”). ; MY ADDRESS: Shows address of this unit.

• You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time.

Bluetooth compatibility check mode

You can check the connectivity of the supported profile between the Bluetooth device and the unit. · Make sure there is no Bluetooth device paired.

1 Press and hold

.

“BLUETOOTH” “CHECK MODE” appears.

“SEARCH NOW USING PHONE” “PIN IS 0000”

scrolls on the display.

2 Search and select “KW-R9 BTS”/

“KW-X8 BTS”/”KW-SX8 BTS” on the Bluetooth

device within 3 minutes.

3 Perform (A), (B) or (C) depending on what

appears on the display.

(A) “PAIRING” “XXXXXX” (6-digit passkey):

Ensure that the same passkey appears on the

unit and Bluetooth device, then operate the

Bluetooth device to confirm the passkey.

(B) “PAIRING” “PIN IS 0000”: Enter “0000” on

the Bluetooth device.

(C) “PAIRING”: Operate the Bluetooth device to

confirm pairing.

After pairing is successful, “PAIRING OK” “[Device Name]” appears and Bluetooth compatibility check starts. If “CONNECT NOW USING PHONE” appears, operate the Bluetooth device to allow phonebook access to continue. “TESTING” flashes on the display.

ENGLISH 19

BLUETOOTH®

The connectivity result flashes on the display. “PAIRING OK” and/or “HANDS- FREE OK”1 and/ or “AUD.STREAM OK”2 and/or “PBAP OK”*3 : Compatible

1 Compatible with Hands-Free Profile (HFP) 2 Compatible with Advanced Audio Distribution Profile (A2DP) *3 Compatible with Phonebook Access Profile (PBAP)

After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has been deleted, and the unit exits check mode.

· To cancel, press and hold

to turn off

the power, then turn on the power again.

BLUETOOTH — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

Audio player via Bluetooth

1 Press

repeatedly to select BT AUDIO (or press SOURCE on the remote control).

· Pressing enters BT AUDIO directly.

2 Operate the Bluetooth audio player to start playback.

To Playback/pause Select group or folder Reverse skip/Forward skip Reverse /Fast-forward Repeat play
Random play
Select a file from a folder/ list

On the faceplate

Press the volume knob.

Press

.

Press

.

Press and hold

.

Press

repeatedly.

TRACK REPEAT, ALL REPEAT, REPEAT OFF

Press

repeatedly.

GROUP RANDOM, ALL RANDOM, RANDOM OFF

Refer to “Select a file from a folder/list” on page 8.

On the remote control Press . Press . Press . Press and hold . ( Not available )
( Not available )
( Not available )

20 ENGLISH

BLUETOOTH®

To

On the faceplate

Switch between connected Press 6.* Bluetooth audio devices

On the remote control ( Not available )

• Pressing the “Play” key on the connected device itself also causes switching of sound output from the device.
  Operations and display indications may differ according to their availability on the connected device.

Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver’s operations from iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth).

Preparation: Install the latest version of JVC Remote application on your device before connecting. For more information, visit http://www.jvc.net/cs/car/.

1 Press and hold

.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press

to exit.

To return to the previous setting item, press

.

Default: XX

REMOTE APP

SELECT Select the device (IOS or ANDROID) to use the application.

IOS

YES: Selects iPhone/iPod to use the application via Bluetooth or connected via

USB input terminal. ; NO: Cancels.

If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is

connected via USB input terminal) to activate the application.

· The connectivity of the application will be interrupted or disconnected if:

­ You change from iPod BT source to any playback source connected via the

USB input terminal.

­ You change from iPod USB source to iPod BT source.

ANDROID YES: Selects Android smartphone to use the application via Bluetooth. ; NO: Cancels.

ANDROID LIST*
STATUS

Selects the Android smartphone to use from the list.
Shows the status of the selected device. IOS CONNECTED: You are able to use the application using the iPhone/iPod connected via Bluetooth or USB input terminal. IOS NOT CONNECTED: No IOS device is connected to use the application. ANDROID CONNECTED: You are able to use the application using the Android smartphone connected via Bluetooth. ANDROID NOT CONNECTED: No Android device is connected to use the application.

• Displayed only when [ANDROID] of [SELECT] is set to [YES].

ENGLISH 21

BLUETOOTH®

Listen to iPhone/iPod via Bluetooth

You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.

Press

repeatedly to select iPod BT.

· You can operate the iPod/iPhone in the same way as iPod/iPhone via

USB input terminal. ( 7)

· If you plug in an iPhone/iPod to the USB input terminal while listening

to iPod BT source, the source automatically change to iPod USB.

Press

to select iPod BT if the device is still connected via

Bluetooth.

Internet radio via Bluetooth
You can listen to internet radio (Pandora, iHeartRadio and Spotify) on the iPhone/iPod touch/Android device via Bluetooth on this unit. · Make sure the USB input terminal is not connected to any device.

Listen to Pandora

Preparation: Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 4)

1 Open the Pandora application on your device.

2 Connect your device via Bluetooth connection. ( 15)

3 Press

repeatedly to select PANDORA (for iPhone/iPod)

or PANDORA BT (for Android device).

The source switches and broadcast starts automatically.

· You can operate Pandora in the same way as Pandora via USB input terminal. ( 9)

Listen to iHeartRadio

Preparation: Select [ON] for [IHEART SRC] in [SOURCE SELECT]. ( 4)

1 Open the iHeartAuto application on your device.

2 Connect your device via Bluetooth connection. ( 15)

3 Press

repeatedly to select IHEARTRADIO.

The source switches and broadcast starts automatically.

· You can operate iHeartRadio in the same way as iHeartRadio via USB input terminal. ( 10)

Listen to Spotify

Preparation: Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 4)

1 Open the Spotify application on your device.

2 Connect your device via Bluetooth connection. ( 15)

3 Press

repeatedly to select SPOTIFY (for iPhone/iPod) or

SPOTIFY BT (for Android device).

The source switches and broadcast starts automatically.

· You can operate Spotify in the same way as Spotify via USB input terminal. ( 11)

22 ENGLISH

AUX

Use a portable audio player 1 Connect a portable audio player (commercially available).
3.5 mm (1/8″) stereo mini plug with “L” shaped connector (commercially available)

AUDIO SETTINGS

Auxiliary input jack

Portable audio player

2 Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. ( 4)

3 Press

repeatedly to select AUX.

4 Turn on the portable audio player and start playback.

Use a 3-core plug head stereo mini plug for optimum audio output.

Select a preset equalizer directly

Press (or)
Press

repeatedly. , then turn the volume knob within 5 seconds.

Preset equalizer: FLAT (default), DRVN 3, DRVN 2, DRVN 1, HARD ROCK, HIP HOP, JAZZ, POP, R&B, USER, CLASSICAL · Drive equalizer (DRVN 3/DRVN 2/DRVN 1) boosts specific frequencies in the
audio signal to reduce the noise heard from outside the car or running noise of the tyres.

Store your own sound settings

1 Press and hold

to enter EASY EQ setting.

2 Turn the volume knob to select an item, then press the knob.

Refer to [EASY EQ] for setting ( 24) and the result is stored to [USER].

· To return to the previous setting item, press

.

· To exit, press

.

ENGLISH 23

AUDIO SETTINGS

Other settings

1 Press and hold

.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press

to exit.

To return to the previous setting item, press

.

EQ SETTING PRESET EQ
EASY EQ

Default: XX

Select a preset equalizer suitable to the music genre. · Select [USER] to use the settings made in [EASY EQ] or [PRO EQ]. FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/ POP/R&B/USER/CLASSICAL

Adjust your own sound settings.

· The settings are stored to [USER].

· The settings made may affect the current settings of [PRO EQ].

SUB.W SP12: 00 to +06

(Default: +03

SUB.W *1:

­50 to +10

00

BASS:

LVL­09 to LVL+09

LVL 00

MID:

LVL­09 to LVL+09

LVL 00

TRE:

LVL­09 to LVL+09

LVL 00)

PRO EQ

Adjust your own sound settings. · The settings are stored to [USER]. · The settings made may affect the current settings of [EASY EQ].

62.5HZ

LEVEL ­09 to LEVEL +09 (LEVEL 00): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

ON: Turns on the extended bass. ; OFF: Cancels.

100HZ/160HZ/250HZ/400HZ/630HZ/1KHZ/1.6KHZ/2.5KHZ/4KHZ/6.3KHZ/10KHZ/ 16kHZ

LEVEL ­09 to LEVEL +09 (LEVEL 00): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

Q FACTOR

1.35/1.50/2.00: Adjust the quality factor.

AUDIO CONTROL

BASS BOOST

LEVEL +01 to LEVEL +05: Selects your preferred bass boost level. ; OFF: Cancels.

LOUDNESS

LEVEL 01/LEVEL 02: Boosts low or high frequencies to produce a wellbalanced sound at low volume. ; OFF: Cancels.

SUB.W LEVEL1 SPK-OUT2

(Not applicable when 3-way crossover is selected.) SUB.W 00 to SUB.W +06 (SUB.W +03): Adjusts the output level of the subwoofer connected via speaker lead. ( 39, 40)

PRE-OUT

SUB.W ­50 to SUB.W +10 (SUB.W 00): Adjusts the output level of the subwoofer connected to the lineout terminals (SW or REAR/SW) through an external amplifier. ( 39, 40)

SUBWOOFER ON: Turns on the subwoofer output. ; OFF: Cancels. SET

1, 2: ( 25)

24 ENGLISH

AUDIO SETTINGS

FADER

(Not applicable when 3-way crossover is selected.) POSITION R15 to POSITION F15 (POSITION 00): Adjusts the front and rear speaker output balance.

BALANCE *3

POSITION L15 to POSITION R15 (POSITION 00): Adjusts the left and right speaker output balance.

VOLUME ADJUST LEVEL ­15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level). Before adjustment, select the source you want to adjust.

AMP GAIN

LOW POWER: Limits the maximum volume level to 25. (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers.) ; HIGH POWER: The maximum volume level is 35.

SPK/PRE OUT

(Not applicable when 3-way crossover is selected.) Depending on the speaker connection method, select the appropriate setting to get the desired output. ( 26, Speaker output settings)

SPEAKER SIZE X ‘ OVER

Depending on the crossover type you have selected ( [X ‘ OVER TYPE]), 2-way crossover or 3-way crossover setting items will be shown.
( 26, Crossover settings) By default, 2-way crossover type is selected.

DTA SETTINGS CAR SETTINGS X ‘ OVER TYPE
2-WAY
3-WAY

For settings, 28, Digital Time Alignment settings.
Caution: Adjust the volume before changing the [X ‘ OVER TYPE] to avoid the sudden increase or decrease of the output level. (Displayed only when [3-WAY] is selected.) YES: Selects two way crossover type. ; NO: Cancels. (Displayed only when [2-WAY] is selected.) YES: Selects three way crossover type. ; NO: Cancels.

SOUND EFFECT

SPACE ENHANCE (Not applicable for TUNER source.) SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ; OFF: Cancels.

SND RESPONSE LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ; OFF: Cancels.

SOUND LIFT

LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels.

VOL LINK EQ

ON: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; OFF: Cancels.

K2 TECHNOLOGY (Not applicable for TUNER source, SIRIUS XM source and AUX source.) ON: Improve the sound quality of compressed music. ; OFF: Cancels.

1 Displayed only when [SUBWOOFER SET] is set to [ON]. ( 24) 2 For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W].
( 26) *3 This adjustment will not affect the subwoofer output.

ENGLISH 25

AUDIO SETTINGS

Speaker output settings [SPK/PRE OUT] (Applicable only if [X ‘ OVER TYPE] is set to [2-WAY]) ( 25) Select the output setting for the speakers [SPK/PRE OUT], based on the speaker connection method.

Connection via lineout terminals For connections through an external amplifier. ( 39, 40)

Setting on [SPK/PRE OUT]

Audio signal through lineout terminal

FRONT

REAR

SW

REAR/REAR (default) Front speakers output

Rear speakers output

Subwoofer output

SUB.W/SUB.W

Front speakers output

L (left): Subwoofer output Subwoofer output R (right): (Mute)

Connection via speaker leads
For connections without using an external amplifier. However, with this settings you can also enjoy the subwoofer output. ( 39)

Setting on [SPK/PRE OUT]

Audio signal through rear speaker lead

L (left)

R (right)

REAR/REAR

Rear speakers output

Rear speakers output

SUB.W/SUB.W

Subwoofer output

(Mute)

If [SUB.W/SUB.W] is selected: ­ [120HZ] is selected in [SUBWOOFER LPF] and [THROUGH] is not available. ­ [POSITION R02] is selected in [FADER] and selectable range is [POSITION
R15] to [POSITION 00].

26 ENGLISH

Crossover settings
Below are the available setting items for 2-way crossover and 3-way crossover.
Caution Select a crossover type according to how the speakers are connected. ( 39, 40) If you select a wrong type: · The speakers may damage. · The output sound level may be extremely high or low.
SPEAKER SIZE Selects according to the connected speaker size for optimum performance. · The frequency and slope settings are automatically set for the crossover
of the selected speaker. · When 2-way crossover is selected, if [NONE] is selected for [TWEETER] of
[FRONT], [REAR] and [SUBWOOFER] for [SPEAKER SIZE], the [X OVER] setting of the selected speaker is not available. · When 3-way crossover is selected, if [NONE] is selected for [WOOFER] of [SPEAKER SIZE], the [X OVER] setting of [WOOFER] is not available.
X ` OVER (crossover) · [FRQ]/[F-HPF FRQ]/[R-HPF FRQ]/[SW LPF FRQ]/[HPF FRQ]/[LPF FRQ]: Adjusts the
crossover frequency for the selected speakers (high pass filter or low pass filter). If [THROUGH] is selected, all signals are sent to the selected speakers. · [SLOPE]/[F-HPF SLOPE]/[R-HPF SLOPE]/[SW LPF SLOPE]/[HPF SLOPE]/[LPF SLOPE]: Adjusts the crossover slope. Selectable only if a setting other than [THROUGH] is selected for the crossover frequency. · [SW LPF PHASE]/[PHASE]: Selects the phase of the speaker output to be in line with the other speaker output. · [GAIN LEFT]/[GAIN RIGHT]/[F-HPF GAIN]/[R-HPF GAIN]/[SW LPF GAIN]/[GAIN]: Adjusts the output volume of the selected speaker.

AUDIO SETTINGS

2-way crossover setting items

SPEAKER SIZE FRONT REAR 1 SUBWOOFER 2 X ‘ OVER TWEETER
FRONT HPF
REAR HPF1
SUBWOOFER LPF 2

SIZE

3.5″/4″/4.75″/5″/6.5″/6.75″/7″/4×6/5×7/

6×8/6×9/7×10

TWEETER

SMALL/MIDDLE/LARGE/NONE (not connected)

3.5″/4″/4.75″/5″/6.5″/6.75″/7″/4×6/5×7/6×8/6×9/7×10/ NONE (not connected)

6.5″/8″/10″/12″/15″ OVER/NONE (not connected)

FRQ
GAIN LEFT GAIN RIGHT F-HPF FRQ
F-HPF SLOPE F-HPF GAIN R-HPF FRQ
R-HPF SLOPE R-HPF GAIN SW LPF FRQ
SW LPF SLOPE SW LPF PHASE SW LPF GAIN

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/ 8KHZ/10KHZ/12.5KHZ
­08DB to 00DB
­08DB to 00DB
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/ 100HZ/120HZ/150HZ/180HZ/220HZ/ 250HZ/THROUGH
­06DB/­12DB/­18DB/­24DB
­08DB to 00DB
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/ 100HZ/120HZ/150HZ/180HZ/220HZ/ 250HZ/THROUGH
­06DB/­12DB/­18DB/­24DB
­08DB to 00DB
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/ 100HZ/120HZ/150HZ/180HZ/220HZ/ 250HZ/THROUGH
­06DB/­12DB/­18DB/­24DB
REVERSE (180°)/ NORMAL (0°)
­08DB to 00DB

3-way crossover setting items

SPEAKER SIZE

TWEETER SMALL/MIDDLE/LARGE

MID RANGE 3.5″/4″/4.75″/5″/6.5″/6.75″/7″/4×6/5×7/6×8/6×9 WOOFER*2 6.5″/8″/10″/12″/15″ OVER/NONE (not connected)

X ‘ OVER

TWEETER HPF FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/10KHZ/ 12.5KHZ

SLOPE ­06DB/­12DB

PHASE REVERSE (180°)/NORMAL (0°)

GAIN

­08DB to 00DB

MID RANGE HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/ 150HZ/180HZ/220HZ/250HZ/THROUGH

HPF SLOPE ­06DB/­12DB

LPF FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/ 10KHZ/12.5KHZ/THROUGH

LPF SLOPE ­06DB/­12DB

PHASE REVERSE (180°)/NORMAL (0°)

GAIN WOOFER*2 LPF FRQ

­08DB to 00DB
30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/ 150HZ/180HZ/220HZ/250HZ/THROUGH

SLOPE ­06DB/­12DB

PHASE REVERSE (180°)/NORMAL (0°)

GAIN

­08DB to 00DB

1 Displayed only when [SPK/PRE OUT] is set to [REAR/REAR]. ( 26) 2 Displayed only when [SUBWOOFER SET] is set to [ON]. ( 24)

ENGLISH 27

AUDIO SETTINGS

Digital Time Alignment settings
Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. · For more information, Determining the value for [DISTANCE] and [GAIN] of
[DTA SETTINGS].

DTA SETTINGS POSITION
DISTANCE 1 GAIN1 DTA RESET CAR SETTINGS CAR TYPE
R-SP LOCATION*2

Selects your listening position (reference point). ALL: Not compensating ; FRONT RIGHT: Front right seat ; FRONT LEFT: Front left seat ; FRONT ALL: Front seat · [FRONT ALL] is displayed only when [X ‘ OVER TYPE] is set to
[2-WAY]. ( 25)
0FT to 20.01FT: Fine adjust the distance to compensate.
­8DB to 0DB: Fine adjust the output volume of the selected speaker.
YES: Resets the settings ([DISTANCE] and [GAIN]) of the selected [POSITION] to default. ; NO: Cancels.
Identify your car type and rear speaker location in order to make the adjustment for [DTA SETTINGS].
COMPACT/FULL SIZE CAR/WAGON/MINIVAN/SUV/ MINIVAN(LONG): Selects the type of vehicle. ; OFF: Not compensating.
Selects the location of the rear speakers in your vehicle to calculate the furthest distance from the listening position selected (reference point). · DOOR/REAR DECK: Selectable only when [CAR TYPE] is selected
as [OFF], [COMPACT], [FULL SIZE CAR], [WAGON] or [SUV]. · 2ND ROW/3RD ROW: Selectable only when [CAR TYPE] is
selected as [MINIVAN] or [MINIVAN(LONG)].

Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS] If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set. 1 Determine the center of the currently set
listening position as the reference point. 2 Measure the distances from the reference
point to the speakers. 3 Calculate the differences between the distance
of the furthest speaker (rear speaker) and other speakers. 4 Set the [DISTANCE] calculated in step 3 for individual speakers. 5 Adjust [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the listening position
1 Before making an adjustment, select the speaker: When 2-way crossover is selected: FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER: ­ [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] is selectable only if a setting other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. ( 27)
When 3-way crossover is selected: TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER: ­ [WOOFER] is selectable only if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE]. ( 27) 2 Displayed only when [X ‘ OVER TYPE] is set to [2-WAY] ( 25) and if a setting other than
[NONE] is selected for [REAR] of [SPEAKER SIZE]. ( 27)

28 ENGLISH

DISPLAY SETTINGS
Zone identification for brightness setting
Zone identification for color setting

1 Press and hold

.

2 Turn the volume knob to select an item (see the

following table), then press the knob.

3 Repeat step 2 until the desired item is selected/

activated or follow the instructions stated on the

selected item.

4 Press

to exit.

To return to the previous setting item, press

.

Default: XX

DISPLAY DIMMER

Dim the illumination. OFF: Dimmer is turned off. Brightness changes to [DAY] setting. ON: Dimmer is turned on. Brightness changes to [NIGHT] setting. ( [BRIGHTNESS]) DIMMER TIME: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: PM6:00 ; [OFF]: AM6:00) DIMMER AUTO: Dimmer turns on and off automatically when you turn off or on the car headlights. *1

BRIGHTNESS TEXT SCROLL*2

Set the brightness for day and night separately. 1 DAY/NIGHT: Select day or night. 2 Select a zone (see illustration on the left column). 3 LEVEL 00 to LEVEL 31: Set the brightness level.
SCROLL ONCE: Scrolls the display information once. ; SCROLL AUTO: Repeats scrolling at 5-second intervals. ; SCROLL OFF: Cancels.

COLOR PRESET

Select illumination colors for the buttons on different zones separately. 1 Select a zone (see illustration on the left column). 2 Select a color for the selected zone.
· COLOR 01 to COLOR 49 · USER: The color you have created for [DAY COLOR] or [NIGHT COLOR] is shown. · COLOR FLOW01 to COLOR FLOW03: Color changes at different speeds. · CRYSTAL/FLOWER/FOREST/GRADATION/OCEAN/SUNSET/RELAX: The selected color
pattern is shown.*3 (Selectable only when [ALL ZONE] is selected in step 1.)

1 The illumination control wire connection is required. ( 39) 2 Some characters or symbols will not be shown correctly (or will be blanked). *3 If one of these color pattern is selected, the [ZONE 1] and [ZONE 2] illumination colors will change to the default
colors.

ENGLISH 29

DISPLAY SETTINGS

DAY COLOR NIGHT COLOR COLOR GUIDE

Store your own day and night illumination colors for different zones. 1 Select a zone. ( 29) 2 RED/GREEN/BLUE: Select a primary color. 3 00 to 31: Select the level. Repeat steps 2 and 3 for all the primary colors. · Your setting is stored to [USER] in [PRESET]. · [NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your
car’s headlight.
ON: Changes the button illumination when settings are performed on menu and list search. ; OFF: Cancels.

REFERENCES
Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Handling discs: · Do not touch the recording surface of the disc. · Do not stick tape etc. on the disc, or use a disc with tape stuck on it. · Do not use any accessories for the disc. · Clean from the center of the disc and move outward. · Clean the disc with a dry silicone or soft cloth. Do not use any solvents. · When removing discs from this unit, pull them out horizontally. · Remove burrs from the center hole and disc edge before inserting a disc.

More information For: ­ Latest firmware updates and latest compatible item list
­ JVC original application ­ Any other latest information Visit http://www.jvc.net/cs/car/.

General · This unit can only play the following CDs:

· DualDisc playback: The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product cannot be recommended.
· For detailed information and notes about the playable audio files, visit http://www.jvc.net/cs/car/.

30 ENGLISH

REFERENCES

Playable files · Playable audio file:
For disc: MP3 (.mp3), WMA (.wma), AAC (.aac) For USB mass storage class device:
MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac) · Playable disc media: CD-R/CD-RW/CD-ROM · Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name. · Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device. The AAC (.m4a) file in a CD encoded by iTunes cannot be played on this unit.
Unplayable discs · Discs that are not round. · Discs with coloring on the recording surface or discs that are dirty. · Recordable/ReWritable discs that have not been finalized. · 8 cm CD. Attempting to insert using an adapter may cause malfunction.
About USB devices · You cannot connect a USB device via a USB hub. · Connecting a cable whose total length is longer than 5 m may result in abnormal playback. · This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A.
About iPod/iPhone · Via USB input terminal:
Made for ­ iPod touch (5th and 6th generation) ­ iPod nano (7th generation) ­ iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus · Via Bluetooth: Made for ­ iPod touch (5th and 6th generation) ­ iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus · It is not possible to browse video files on the “Videos” menu in [HEAD MODE]. · The song order displayed on the selection menu of this unit may differ from that of the iPod/ iPhone.

· Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.
About Android device · This unit supports Android OS 4.1 and above. · Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory
(AOA) 2.0. · If the Android device supports both mass storage class device and AOA 2.0, this unit always
playback via AOA 2.0 as priority.
About Pandora · Pandora is only available in certain countries.
For more information, visit http://www.pandora.com/legal. · Because Pandora is a third-party service, the specifications are subject to change without
prior notice. Accordingly, compatibility may be impaired, or some or all of the services may become unavailable. · Some functions of Pandora cannot be operated from this unit. · For issues using the application, please contact Pandora at pandora-support@pandora.com.
About iHeartRadio · iHeartRadio® is a third-party service, therefore the specifications are subject to change
without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. · Some iHeartRadio® functionality cannot be operated from this unit.
About Spotify · Spotify application supports:
­ iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus (iOS 8 or above) ­ iPod touch (5th and 6th generation) ­ Android OS 4.0.3 or above · Spotify is a third party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. · Some functions of Spotify cannot be operated from this unit. · For issues using the application, please contact Spotify at <www.spotify.com>.
ENGLISH 31

REFERENCES

About Bluetooth · Depending on the Bluetooth version of the device, some Bluetooth devices may not be able
to connect to this unit. · This unit may not work with some Bluetooth devices. · Signal conditions vary, depending on the surroundings.

Change the display information

Each time you press

, the display information changes.

· If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other

information (eg. station name) appears or display will be blank.

Source name FM or AM
CD or USB FRONT/ USB REAR/USB

Display information
Frequency (Date/Clock)1 Frequency (Date) with music synchronisation2 (back to the beginning)
(For FM Radio Broadcast Data System stations only) Station name (PS)/Program type (PTY) (Date/Clock)1 Radio text (Date/Clock)1 Radio text+ (Radio text+) Song title (Artist) Song title (Date/Clock)1 Frequency (Date/Clock)1 Station name (PS)/Program type (PTY) (Date) with music synchronisation2 (back to the beginning)
(For CD-DA) (Applicable only for KW-R935BTS/KW-R930BTS) Track title (Artist) Track title (Disc name) Track title (Date/Clock)1 Playing time (Date/Clock)1
Track title (Artist) with music synchronisation2 (back to the beginning)
(For MP3/WMA/AAC/WAV/FLAC files) Song title (Artist) Song title (Album name) Song title (Date/Clock)1 File name (Folder name) File name (Date/Clock)1 Playing time (Date/Clock)1
Song title (Artist) with music synchronisation2 (back to the beginning)

32 ENGLISH

Source name

Display information

iPod FRONT/iPod REAR/ iPod USB/iPod BT or ANDROID FRONT/ ANDROID REAR/ANDROID

When [HEAD MODE]/[AUTO MODE] is selected ( 8):
Song title (Artist) Song title (Album name) Song title (Date/Clock)1 Playing time (Date/Clock)1
Song title (Artist) with music synchronisation*2
(back to the beginning)

PANDORA FRONT/

Station name (Date/Clock)1 Shared/Radio (Date/Clock)1

PANDORA REAR/PANDORA/ Song title (Artist) Song title (Album name) Song title

PANDORA BT

(Date/Clock)1 Playing time (Date/Clock)1 Station

name (Date) with music synchronisation*2 (back to the

beginning)

IHEARTRADIO-F/ IHEARTRADIO-R/ IHEARTRADIO
SPOTIFY FRONT/ SPOTIFY REAR/SPOTIFY/ SPOTIFY BT

Station name (Date/Clock)1 Song title (Artist) Song title (Date/Clock)1 Station name (Date) with music synchronisation2 (back to the beginning)
Context title (Date/Clock)1 Song title (Artist) Song title (Album name) Song title (Date/Clock)1 Playing Time (Date/Clock)1 Context title (Date) with music synchronisation*2 (back to the beginning)

SIRIUS XM

Channel number (Status) Channel name (Status) Artist (Status) Song title (Status) Content information (Status)
Category name (Status) Date (Status) Channel number (Status) with music synchronisation*2 (back to the beginning)

BT AUDIO

Song title (Artist) Song title (Album name) Song title (Date/Clock)1 Playing time (Date/Clock)1 Song title (Artist) with music synchronisation*2 (back to the
beginning)

AUX

AUX (Date/Clock)*1 AUX (Date) with music

synchronisation*2 (back to the beginning)

1 Battery and signal strength of the Bluetooth device will be shown if [BATT/SIGNAL] is set
to [AUTO]. ( 17) 2 The illumination colors of the buttons change and synchronise with the music.

TROUBLESHOOTING

Symptom

Remedy

Sound cannot be heard.

· Adjust the volume to the optimum level. · Check the cords and connections.

General

“MISWIRING CHECK WIRING THEN PWR ON” appears.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

“PROTECTING SEND SERVICE” appears.

Send the unit to the nearest service center.

Source cannot be selected. Check the [SOURCE SELECT] setting. ( 4)

Radio

· Radio reception is poor. · Static noise while
listening to the radio.

Connect the antenna firmly.

Disc cannot be ejected.

Press and hold to forcibly eject the disc. Be careful not to drop the disc when it is ejected.

“IN DISC” appears.

Make sure nothing is blocking the loading slot when you eject the disc.

“PLEASE EJECT” appears.

Press , then insert the disc correctly.

CD/USB/iPod

Playback order is not as intended.

The playback order is determined by the file name (USB) or the order in which files were recorded (disc).

Elapsed playing time is not This depends on the recording process earlier. correct.

“NOT SUPPORT” appears and track skips.

Check whether the track is a playable format. ( 31)

“READING” keeps flashing. · Do not use too many hierarchical levels and folders. · Reload the disc or reattach the USB device.

Symptom

Remedy

“UNSUPPORTED DEVICE” appears.

· Check whether the connected device is compatible with this unit and ensure the file systems are in supported formats.
( 31) · Reattach the device.

“UNRESPONSIVE DEVICE” appears.

Make sure the device is not malfunction and reattach the device.

“USB HUB IS NOT SUPPORTED” appears.

This unit cannot support a USB device connected via a USB hub.

“CANNOT PLAY” appears. Connect a USB device that contains playable audio files.

CD/USB/iPod

· The source does not change to “USB” when you connect a USB device while listening to another source.
· “USB ERROR” appears

The USB port is drawing more power than the design limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. If this does not solve the problem, turn the power off and on (or reset the unit) before replacing with another USB device.

The iPod/iPhone does not · Check the connection between this unit and iPod/ turn on or does not work. iPhone.
· Disconnect and reset the iPod/iPhone using hard reset.

“LOADING” appears when

you enter search mode by

pressing

.

This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later.

Correct characters are not displayed.

· This unit can only display uppercase letters, numbers, and a limited number of symbols.
· Depending on the display language you have selected ( 5), some characters may not be displayed correctly.

ENGLISH 33

TROUBLESHOOTING

Symptom

Remedy

· Sound cannot be heard during playback.
· Sound output only from the Android device.

· Reconnect the Android device. · If in [AUDIO MODE], launch any media player
application on the Android device and start playback. · If in [AUDIO MODE], relaunch the current media player
application or use another media player application. · Restart the Android device. · If this does not solve the problem, the connected
Android device is unable to route the audio signal to unit. ( 31)

ANDROID

Cannot playback at [AUTO MODE].

· Make sure JVC MUSIC PLAY APP is installed on the Android device. ( 7)
· Reconnect the Android device and select the appropriate control mode. ( 8)
· If this does not solve the problem, the connected Android device does not support [AUTO MODE]. ( 31)

“NO DEVICE” or “READING” keeps flashing.

· Switch off the developer options on the Android device. · Reconnect the Android device. · If this does not solve the problem, the connected
Android device does not support [AUTO MODE]. ( 31)

Playback is intermittent or Turn off the power saving mode on the Android device. sound skips.

“CANNOT PLAY”

· Make sure Android device contains playable audio files. · Reconnect the Android device. · Restart the Android device.

“ADD ERROR”

New station creation is unsuccessful.

Pandora

“CHK DEVICE”

Check the Pandora application on your device.

“NO SKIPS”

The skip limit has been reached.

“NO STATIONS”

No stations are found.

34 ENGLISH

Symptom

Remedy

“STATION LMT”

The number of registered stations has reached its limit. Retry after deleting unnecessary stations from your device.

“UPGRADE APP”

Make sure you have installed the latest version of the Pandora application on your device.

Pandora

“CONNECT ERR”

Communication is unstable.

“RATING ERR”

Registration of thumbs up/thumbs down has failed due to insufficient network connectivity.

“THUMBS N/A”

Registration of thumbs up/thumbs down is not allowed.

“LICENSE ERR”

You try to access from a country which Pandora is not deliverable.

iHeartRadio

Station cannot be selected.

If “Explicit Content” in [Account Settings] is checked in the web version of iHeartRADIO, custom stations become unavailable.

“NOT CONNCTD”

Link to the application is impossible.

“DISCONNECTED”

USB is disconnected from the head unit. Please make sure the device is connected properly through USB.

Spotify

“CONNECTING”

· Connected via USB input terminal: The device is connecting to the head unit. Please wait.
· Connected via Bluetooth: The Bluetooth is disconnected. Please check Bluetooth connection and make sure both the device and unit are paired and connected.

“CHECK APP”

The Spotify application is not connected properly, or user is not login. End the Spotify application and restart, then log in to your Spotify account.

SiriusXM® Radio

“CH LOCKED LOCK CODE?”

The selected channel is locked. Enter the correct pass code to unlock. ( 14)

“CHAN UNSUB”

The selected channel is unsubscribed. Call 1-866-635-2349 in the U.S.A. or 1-877-438-9677 in Canada to subscribe.

TROUBLESHOOTING

Bluetooth®

SiriusXM® Radio

Symptom “CH UNAVAIL”
“CHECK ANTENNA”
“CHECK TUNER”
“NO SIGNAL” “SUBSCRIPTION UPDATED ­ PRESS ENTER TO CONTINUE.” “CODE ERROR”
“NO CONTENT” “SCAN CANCEL” No Bluetooth device is detected. Pairing cannot be made.
Echo or noise occurs.
Phone sound quality is poor.

Remedy
The selected channel is unavailable. For more information about the SiriusXM channel lineup, visit <www.siriusxm.com>.
Check that the antenna and its connection are in good condition.
Make sure the SiriusXM Vehicle Tuner is connected to the unit.
Make sure the antenna is mounted outside the vehicle.
Your subscription is updated. Press the volume knob to continue.
Make sure you have entered the correct pass code. ( 14)
There is insufficient content to start TuneScan.
TuneScan has been aborted.
· Search from the Bluetooth device again. · Reset the unit. ( 3)
· Make sure you have entered the same PIN code to both the unit and Bluetooth device.
· Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. ( 15)
· Adjust the microphone unit’s position. ( 15) · Check the [ECHO CANCEL] setting. ( 17)
· Reduce the distance between the unit and the Bluetooth device.
· Move the car to a place where you can get a better signal reception.

Symptom

Remedy

Sound is being interrupted · Reduce the distance between the unit and the Bluetooth

or skipped during playback audio player.

of a Bluetooth audio

· Turn off, then turn on the unit and try to connect again.

player.

· Other Bluetooth devices might be trying to connect to

the unit.

The connected Bluetooth audio player cannot be controlled.

· Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.)
· Disconnect and connect the Bluetooth player again.

Bluetooth®

“PLEASE WAIT”

The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again.

“NOT SUPPORT”

The connected phone does not support Voice Recognition feature.

“ERROR”

Try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.

“H/W ERROR”

Reset the unit and try the operation again. If “H/W ERROR” appears again, consult your nearest service center.

“SWITCHING NG”

The connected phones might not support phone switching feature.

If you have any troubles, try the following: 1 Check TROUBLESHOOTING 2 Reset the unit ( 3) 3 Contact (USA only)
Call: 1-800-252-5722 ( or ) visit: http://www.jvc.com

ENGLISH 35

SPECIFICATIONS

Tuner

FM Frequency Range
Usable Sensitivity (S/N = 26 dB) Quieting Sensitivity (DIN S/N = 46 dB) Frequency Response (±3 dB) Signal-to-Noise Ratio (MONO) Stereo Separation (1 kHz) AM Frequency Range
Usable Sensitivity (S/N = 20 dB)

87.9 MHz — 107.9 MHz (200 kHz step) 87.5 MHz — 108.0 MHz (50 kHz step) 8.2 dBf (0.71 V/75 ) 17.2 dBf (2.0 V/75 ) 30 Hz — 15 kHz 64 dB 40 dB 530 kHz — 1 700 kHz (10 kHz step) 531 kHz — 1 611 kHz (9 kHz step) 29 dB (28.2 V)

Laser Diode Digital Filter (D/A) Spindle Speed Wow & Flutter Frequency Response (±1 dB) Total Harmonic Distortion (1 kHz) Signal-to-Noise Ratio (1 kHz) Dynamic Range Channel Separation MP3 Decode WMA Decode AAC Decode

GaAIAs 8 times over sampling 500 rpm — 200 rpm (CLV) Below measurable limit 20 Hz — 20 kHz 0.01 % 105 dB 90 dB 85 dB Compliant with MPEG-1/2 Audio Layer-3 Compliant with Windows Media Audio AAC-LC “.aac” files

CD player (for KW-R935BTS/KW-R930BTS)

Bluetooth

USB

USB Standard Compatible Devices File System Maximum Supply Current Digital Filter (D/A) Converter Frequency Response (±1 dB) Signal-to-Noise Ratio (1 kHz) Dynamic Range Channel Separation MP3 Decode WMA Decode AAC Decode WAV Decode FLAC Decode
Version Frequency Range Output Power Maximum Communication Range Pairing Profile

USB 1.1, USB 2.0 (Full speed) Mass storage class FAT12/16/32 DC 5 V 1.5 A 24 Bit 20 Hz — 20 kHz 105 dB 90 dB 85 dB Compliant with MPEG-1/2 Audio Layer-3 Compliant with Windows Media Audio AAC-LC “.aac”, “.m4a” files Linear-PCM FLAC file, up to 24 bit/96 kHz
Bluetooth 3.0 2.402 GHz — 2.480 GHz +4 dBm (MAX), 0 dBm (AVE) Power Class 2 Line of sight approx. 10 m (32.8 ft) SSP (Secure Simple Pairing) HFP1.6 (Hands-Free Profile) A2DP (Advanced Audio Distribution Profile) AVRCP1.5 (Audio/Video Remote Control Profile) PBAP (Phonebook Access Profile) SPP (Serial Port Profile)

36 ENGLISH

SPECIFICATIONS

Auxiliary

Frequency Response (±3 dB) Input Maximum Voltage Input Impedance

20 Hz — 20 kHz 1 000 mV 30 k

Audio

Maximum Output Power Full Bandwidth Power (at less than 1 % THD) Speaker Impedance Preout Level/Load
Preout Impedance

50 W × 4 or 50 W × 2 + 50 W × 1 (Subwoofer = 4 ) 22 W × 4
4 — 8
KW-R935BTS: CD/USB: 4 000 mV/10 k load KW-R930BTS: CD/USB: 2 500 mV/10 k load KW-X830BTS/KW-SX83BTS: USB: 2 500 mV/10 k load 600

General

Operating Voltage (10.5 V — 16 V allowable) Maximum Current Consumption Operating Temperature Range Installation Size (W × H × D)
Net Weight

14.4 V

10 A

­10°C — +60°C

178 mm × 100 mm × 158 mm (7-1/16″ × 3-15/16″ × 6-1/4″)

KW-R935BTS:

1.4 kg (3.1 lbs)

KW-R930BTS:

1.3 kg (3.0 lbs)

KW-X830BTS/KW-SX83BTS: 0.9 kg (2.1 lbs)

Subject to change without notice.

INSTALLATION/CONNECTION

Warning · The unit can only be used with a 12 V DC power supply, negative ground. · Disconnect the battery’s negative terminal before wiring and mounting. · Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire
(black) to prevent a short circuit. · To prevent short circuit:
­ Insulate unconnected wires with vinyl tape. ­ Be sure to ground this unit to the car’s chassis again after installation. ­ Secure the wires with cable clamps and wrap vinyl tape around the wires that comes into
contact with metal parts to protect the wires.
Caution · For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. · Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during
and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot. · Do not connect the wires of speakers to the car chassis or Ground wire (black), or connect
them in parallel. · Connect speakers with a maximum power of more than 50 W. If the maximum power of
the speakers is lower than 50 W, change the [AMP GAIN] setting to avoid damaging the speakers. ( 25) · Mount the unit at an angle of less than 30º. · If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. · Keep all cables away from heat dissipate metal parts. · After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. · If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating.

ENGLISH 37

INSTALLATION/CONNECTION
Part list for installation (A) Wiring harness
(B) Flat head screw M5 × 8 mm (M5 × 3/8″)
(C) Round head screw M5 × 8 mm (M5 × 3/8″)

Installing the unit (in-dash mounting)
Install onto the car brackets using the supplied screws (B) or (C). The screw holes differ depending on the model of the cars.

Do the required wiring. ( 39)

Car bracket

Dashboard of your car

Basic procedure

1 Remove the key from the ignition switch, then disconnect the

terminal of the car battery.

2 Connect the wires properly.

See Wiring connection. ( 39)

3 Install the unit to your car.

See Installing the unit (in-dash mounting).

4 Connect the terminal of the car battery.

5 Press

to turn on the power.

6 Reset the unit. ( 3)

Use only the specified screws. Using wrong screws might damage the unit.

38 ENGLISH

INSTALLATION/CONNECTION
Wiring connection
IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.

Vehicle dashboard
Factory wiring harness (vehicle)
Custom wiring harness (separately purchased)

Blue: To power antenna
Blue/white: To amplifier

Brown (not used)

Recommended connection

Antenna terminal

To the steering wheel remote control adapter

Light blue/yellow

Join the same color wires together. Blue/white: Remote (12 V 350 mA)

Orange/white: Illumination
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker/3-way crossover: Mid range speaker (right) Gray/black White: Front speaker/3-way crossover: Mid range speaker (left) White/black Purple: Rear speaker/3-way crossover: Tweeter (right) Purple/black Green: Rear speaker1/3-way crossover: Tweeter (left) Green/black 1

Fuse (10 A)
Ignition switch Separate red wire
Car fuse block Make this connection if your vehicle factory wiring harness does not have “12 V ignition switch” wire. *1 You can also connect a subwoofer speaker
directly using this lead without an external subwoofer amplifier. For setting, 26.
ENGLISH 39

INSTALLATION/CONNECTION
Connecting external components

MIC (Microphone input terminal) ( 15) KW-R935BTS: USB cable (DC 5 V 1.5 A) (approx. 1.2 m/4 feet)
Expansion port (12 V 500 mA) To the optional SiriusXM Vehicle Tuner (commercially available) ( 12)

Connecting external amplifiers via output terminals

Signal cord (not supplied)

JVC Amplifier*2

Output terminals

Remote wire (not supplied)

To remote lead (blue/white) of the wiring harness. ( 39)

Output terminals 2-way crossover setting

REAR FRONT SW

: Rear output : Front output : Subwoofer output

3-way crossover setting
Tweeter output Mid Range output Woofer output

*2 Firmly connect the ground wire of the amplifier to the car’s chassis to avoid damaging the unit.

40 ENGLISH

libFLAC Copyright (C) 2000-2009 Josh Coalson Copyright (C) 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: – Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer. – Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution. – Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

· Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
· “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
· iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
· Lightning is a trademark of Apple Inc. · Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission. · iHeartRadio® and iHeartAutoTM are trademarks owned by iHeartMedia, Inc. All uses are authorized
under license. · Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved. · SPOTIFY and the Spotify logo are among the registered trademarks of Spotify AB. · Android is trademark of Google Inc. · The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.

© 2017 JVC KENWOOD Corporation

0717DTSMDTJEIN

U.S.A.

JVCKENWOOD USA Cor oration

TO OUR VALUED CUSTOMER

THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE.

NEED HELP ON HOW TO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEED TO LOCATE A JVC SERVICE CENTER?
LIKE TO PURCHASE ACCESSORIES?

JVC IS HERE TO HELP!
TOLL FREE: 1 (800)252-5722 http://www.us.jvckenwood.com

Remember to retain your Bill of Sale for Warranty Service.
Do not attempt to service the product yourself
Caution
To prevent electrical shock, do not open the cabinet. There are no user serviceable parts inside. Please refer to qualified service personnel for repairs.
PRODUCT REGISTRATION
We suggest that you register your product since it will enable us to contact you directly if it is ever necessary to correct a safety related condition in your product. You can register at www.register.jvc.com Please note that failure to register does not diminish any of your rights during the warranty period.
BT-50004-1 (15103)

JVC

LIMITED WARRANTY

ONLY FOR PROD UCT PURCHASED IN U.S.A .

JVCKENWOOD USA Corporation warrants this product and all parts thereof, except as set forth bel ow ONLY TO THE ORIGINAL RETAIL PURCHASERto be FREEFROM DEFECTIVE MATER IALS AND WORKMANSHIP from the date of original purchase for the period shown below. (“The Warranty Period”)

PARTS 2 YR S I LABOR 2 YR S : Car audio ARSENAL series PARTS 1 YR I LABOR 1 YR : All other car audio products

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTR ICT OF COLUMBIA AND IN TH E COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO : Ifthis product isfound to be defective within the warrantyperiod.JVC will repair or replace defective partswith new or rebu ilt equivalentsat no charge tothe original owner. Suchrepair and replacement services shall be rendered by JVC during normal business hoursat JVC authorized service centers. Parts used lor replacement arewarranted onlyfor theremainder of the Warranty Period. All products may be brought to aJVC authorizedservice center on acarry-in basis. Color televisions withascreen size of37″class or greater qualify lor in-homeservice. In such cases. atech nicianwill cometo your home and either repair theTV there or removeand return it if 11cannot be repa ired 1n your home.
WHAT YOU MUST DO FOR WARRANTY SERVICE: Pleasedo not return your product tothe retailer. Instead. returnyour product to the JVC authorized service center nearest you. ll shipping the product to theservice center, please be sure to package it carefu lly, preferably inthe original packaging. and includea brief descriptionof the problem(s) and acopy of the proof of purchase to verify purchase date. Please call 1-800-252-5722 1o locate the nearest JVC authorized service center. Service locationscan also be obtained from our website hllp:/lwww.us.jvckenwood.com If your product qualifies for in-home service, the service representative will req uireclear access to theproduct.
If youhave any questionsconcerning your JVC Product, please contact our Customer Care Center atS00-252-5722
WHAT IS NOT COVERED: This limited warran typrovided by JVC does not cover: 1. Products whichhave been su bject to abuse, accident, alteration, modification, tampering, negligence, misuse. faulty installation, lack of
reasonablecare, or if repaired or serviced by anyone other thanaservice facility authorized by JVCtorender suchservice, or if affixedto any allachmenl not provided withthe products, or if the model or serial number has beenaltered, tampered with, defaced or removed; 2. Initial installation , installation and removal from cabinets or mounting systems. 3. Operational adjustments covered inthe Owner’s Manual, normal mamtenance, videoand audio head cleaning; 4. Damage that occurs in shipment, due to act of God, and cosmetic damage; 5. Signal receptionproblemsand failures due to linepower surge; 6. User Removal Memory Devices/Video Pick-up Tubes/CCDImageSensorsare covered for 90 days fromthedateot pu rchase; 7. Accessories; 8. Batteries(except that RechargeableBalleriesare covered for 90 days fromthedale of purchase); 9. Productsused for commercial purposes, including, but not limited to rental. 10 Loss of data resultant from malfunction of hard drive or other data storage device;
There are no express warranties except as listed above.
THEDURATIONOF ANYIMPLIED WARRANTIES, INCLUDING THEIMPLIED WARRANTY OFMER CHANTABILITY, ISLIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. JVC SHALL NOT BE LIABLEFOR ANY LOSS OFUSEOFTHE PRODUCT, INCONVENIENCE, ORANY OTH ERDAMAGES, WHETHER DIRECT, INCIDENTALOR CONSEQUENTIAL(INCLUDING WITHOUT LIMITATION, DAMAGETOTAPES, RECORDSORDISCS) RESULTING FROM THEUSEOF THIS PRODUCT, OR ARISING OU TOF ANY BREACH OF THISWARRANTY ALLEXPRESSAND IMPLIEDWARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITYANO FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TOTHE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allowthe exclusion of incidental or consequential damagesor limitations on how longan implied warranty lasts, so these limitations or exclusions may not apply toyou This warrantygives you specific legal rights and you may also have other rights which varyfrom state to state.
JVCKENWOOD USA Corporation
POBox 22745, 2201 East Dominguez Street, Long Beach, CA90801-5745 htlp ·I/ www.us .jvckenwood .com
REFURBISHED PRODUCTS CARRY ASEPARATEWARRANTY, THISWARRANTY DOES NOT APPLY. FOR DETAIL OFREFURBISHEDPRODUCT WARRANTY, PLEASE REFERTO THE REFURBISHED PRODUCTWARRANTY INFORMATION PACKAGEDWITHEACH REFURBISHEDPRODUCT
For customer use: Enter below the Model No. and Serial No. which is locatedeither ontherear, bottomor side of thecabinet. Retainthis information for future refe ren ce.

Model No..

Serial No.·

Purchase dale:

Nameof dealer:

Jvc CANADA

JVCKENWOOD CANADA INC.
WARRANTY

Warranty applies only to PRODUCT distributed in Canada by JVCKEN WOOD CANADA INC.

JVCKENWOOD CANADA INC. (hereafter called “JVC”) gives t he following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer. JVC warrants that th is JVCproduct is free. under normal use and maintenance, from any defects in material and workmanship subject to the following terms and conditions:

1. To Obtain Warranty Service: (a) JVC product requ iring servicemust be presented together with proof of purchase. (b) The JVC product must be brought in for service to an authorized JVC Service Centre.

3. Standards: If any defects should be found in aJVC product withinthe applicable terms, necessary repairs shall bemade at nocost to the purchaser for parts or labour when JVCacknowledges that such defectsare duetofaulty material or workmanship

2. Limitation: This Warranty shall not apply to: (a) Repair or replacement of any cabinets, batteries, plates. connection cords, antennas, dust covers, knobs , speaker grills, speaker cones, projection screens, projectionscreen savers, and all accessories. (b) Anydefects caused or repairs required as aresult of misuse, abusive ope ration, negligence, improper use and/or insufficient care (c) Any defect caused or repairs requ ired as aresult of not following the instructions in the operation manual. (d) Any JVC product tampered with, adjusted or repai red by any party other than JVC or authorized JVC Service Centre personn el. (e) Any JVC products on which theserial number has been defaced, modified or removed. (f) Maintenance, cleani ngor periodic check-up (g) Conversion to foreign or domestic voltage or frequency. (h) Any JVC product without the Canadian Electrical Safety Regulations ID. (i) Any JVC products used for commercial or institutional, rental, or display purposes. Parts …… 1 year (except video head – 90 days) Labour … 90 days (j) Any JVC product which has been resold and no longer owned by the original purchaser (k) Product purchased from “outsideCanada”, “bankruptcy” or “liquidator”. (I) Any defects caused by fire, flood, lightning, power surge, or other events beyond the control of JVC. (m)FOR AUTO PRODUCTS Warranty does not cover elimination of car static or electrical interferences, cleaning of head, adjustments, or labour cost for theremoval or reinstallation of the unit for repair

4. Exclusion of All Other Express Warranties: This warrantyconstitutes theentire express warranty given by JVC for JVC products andno dealer or servicecentrepersonnel or his , its or their agent or employee is, or areauthorized to extend or enlarge this warranty on behalf of JVC.
5. Disclaimer of Consequential Damage: To the extent the law perm its JVC disclaims any responsibility for loss of time or useof itspro duct, transportationcosts, or any other indirect, incidental or consequential damage or inconven ien ce .

WARRANTY TERM (VALID FROM THE DATE OF PURCHASE)

Product

Parts Labour (Years) (Years)

Projection TV In-Home Service

Colour TV In-Home (25″ and above) D-ILA Rear Projection In-Home Service

1

1

LCD TV In-Home Serv ice (25″ and above)

*In-Home service to be provided whereavailable. Where it is not available, the purchaser must assumethe responsibility and expense for the proper packing, shipment and all costs associated with the delivery of the equipment to and from the closest JVC Auth orized Service Centre.

Receivers and Home Speakers purchased

separately. Front Projection and Car

2

2

Audio “ARSENAL” Series

AC Adapters, Remote controls, Headphones, Microphones and Projector lamps
Wood ConeSpeakers
All Other Categories

90 days 90 days

5

5

1

1

JVCKENWOOD CANADA INC.
6070 Kestrel Road, Mississauga, Ontario, L5T 1S8Canada TEL: 905-670-3381 FAX: (905)670-7244 Service toll free# 1-800-964-2650
http://www.jvc.ca E-mai l: service@jvc.ca
Product Registration We suggest that youregister your product since it will enableusto contact you directly if it isever necessary to correct a safety related condition in your product. You canregister at http://www.jvc.ca/www/Support/Warranty.aspx
For customer use: Enter below the Model No. andSerial No. which is located either on therear, bottom or side of the cabinet. Retainthis information for future reference.

Model No.:

Serial No.:

Purchase date:

Name of dealer:

GARANTIE

References

• dtsc.ca.gov/hazardouswaste/perchlorate
• JVC CANADA - Products
• JVC CANADA - Products
• JVC CANADA - Products
• JVC USA - Products
• Car Electronics Support Information | JVC
• Pandora Services Terms of Use
• JVCKENWOOD USA Corporation
• SiriusXM: Music, Sports, Talk & Podcasts, Live & On Demand
• Spotify - Web Player: Music for everyone
• JVCKENWOOD USA Corporation
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>