JOYROOM ZS240PRO Magnetic Wireless Car Charger Holder User Manual

USER MANUAL
JR-ZS240 Pro Magnetic Wireless Car Charger Holder

Product diagram

Indicator light

Parameters

Model: JR-ZS240 Pro
Name: Magnetic Wireless Car Charger Holder
Input: 5V 2A 9V 2A 12V 2A
Output: 5W/7.5W/10W/15W (MAX)
Applicable: Phone size 4.7”-6.8”
Charging port: Type-C

Accessory kit

Operation steps ( Vent hook )

1. Put the ball head into the nut first, then insert it into the socket on the back of the holder, tighten the nut.

2. Loosen the knob and open the hook, install the vent hook onto the air vent, adjust to desired angle.

3. Use the Type-C charging cable in the package to connect the holder and the car charger.
   

4. Place your phone. It will be securely attached to the charger holder with its auto alignment function.

Note:
The product will automatically hold and charge your iP 12/13/14 once sensing it. If you don’t want to take off your phone case, we suggest using magnetic cases.

Operation steps

1. Open the cleaning kit, wipe the phone back clean.

2. Paste the separation film onto the center of the phone back.

3. Paste the metal ring onto the center of the phone back by use of the alignment card.
   (Note: As long as the upper and lower scales, the left and right scales of the alignment card are equal, the metal ring will be pasted right to the center of the phone)
   

4. Place your phone, adjust the holder to a desired angle.
   

Warranty Card|
---|---
User Name:|
User Tel:|
User address (with postcode):|
Purchase date:|
Invoice No.:|
Dealer Name:|
Dealer Tel:|
Dealer Address (with postcode):|

Warranty

A. If there is performance failure on this product and it’s not caused by human error, we will provide a 12-month free warranty service for consumers from the date of purchase.
B. Warranty exceptions:

• Human damage;
• Expired the warranty period;
• Failure to provide valid purchase certificate;
• Product damage caused by failure to follow the use, maintenance and care instructions;
• Product damage caused by disassembling or repairing the product without authorization, or immersing the product in water;
• Damage caused by force majeure.

FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>