Fusion Pro 18650-2500mAh Percussion Therapy Chiropractor Spa Massager Gun User Manual

Fusion Pro 18650-2500mAh Percussion Therapy Chiropractor Spa Massager Gun

Section 1- Chemical Product and Company Identification

• Product Identification: Cylindrical Lithium-ion Cell
• Model No.: 18650-2500mAh
• Manufacturer’s / Supplier Name: Hefei Zhonghe Power New Energy Technology Co., LTD
• Address: No.58 Yihu West Road, high-tech industrial Development Zone, Lujiang County, Hefei City, Anhui Province, China
• Telephone number of the supplier: +86-551-82550088
• Emergency Telephone No. (24h): +86-551-82550088
• Fax: None
• E-mail address: 1228008271@qq.com
• Preparation Date: 2020-12-11
• Effective date: 2021-01-01 ~ 2021-12-31
• This MSDS was prepared by Shenzhen NTEK Testing Technology Co., Ltd.
• Item Number: PN20201210280401
• Referenced documents: ISO 11014:2009 Safety data sheet for chemical products

Section 2 – Hazards Identification

Preparation hazards and classification| Not dangerous with normal use. Do not dismantle, open or shred the Cylindrical

Lithium-ion Cell ingredients contained within or their ingredients products could be harmful.

---|---
Apperance, Color, and

Odor

| Solid object with no odor, no color.
Primary Route(s) of Exposure| These chemicals are contained in a sealed enclosure. Risk of exposure occurs only if the cell is mechanically, thermally or electrically abused to the point of compromising the enclosure. If this occurs, exposure to the electrolyte solution

contained within can occur by Inhalation, Ingestion, Eye contact and Skin contact

Potential Health Effects:| ACUTE (short term): see Section 8 for exposure controls In the event that this battery has been ruptured, the electrolyte solution contained within the battery would be corrosive and can cause burns.

Inhalation: Inhalation of materials from a sealed battery is not an expected route of exposure. Vapors or mists from a ruptured battery may cause respiratory irritation. Ingestion: Swallowing of materials from a sealed battery is not an expected route of exposure. Swallowing the contents of an open battery can cause serious chemical burns of mouth, esophagus, and gastrointestinal tract.

Skin: Contact between the battery and skin will not cause any harm. Skin contact with contents of an open battery can cause severe irritation or burns to the skin. Eye: Contact between the battery and the eye will not cause any harm. Eye contact

with contents of an open battery can cause severe irritation or burns to the eye.

Section 3 – Composition/Information on Ingredients

Cylindrical Lithium-ion Cell is a mixture.

Hazardous Ingredients

(Chemical Name)

| Concentration or

concentration ranges (%)

| CAS Number
---|---|---
Cobalt lithium manganese nickel oxide| 37.68| 182442-95-1
Polyvinylidene fluoride (PVDF)| 0.35| 24937-79-9
Carbon Black| 0.29| 1333-86-4
Graphite| 19.91| 7782-42-5
Acrylic acid, buta-1, 3-diene,

styrene

| 0.83| 25085-39-6
Polyethylene|

4.00

| 9002-88-4
Aluminum oxide| 1344-28-1
Stainless steel, powder, -150

mesh

| 17.78| 12597-68-1
Copper foil| 7.96| 7440-50-8
Aluminium foil| 3.50| 7429-90-5
Other| 7.70| N/A

Labeling according to EC directives.
No symbol or risk phrase are required.
Note: CAS number is Chemical Abstract Service Registry Number.
N/A=Not applicable.

Section 4 – First-aid Measures

Inhalation| If contents of an opened battery are inhaled, remove source of contamination or move victim to fresh air. Obtain medical advice.
---|---
Skin contact| If skin contact with contents of an open battery occurs, as quickly as possible remove contaminated clothing, shoes and leather goods. Immediately flush with lukewarm, gently flowing water for at least 30 minutes. If irritation or pain persists, seek medical attention. Completely decontaminate clothing, shoes and leather goods before reuse or discard.
---|---
Eye contact| If eye contact with the contents of an open battery occurs, immediately flush the contaminated eye(s) with lukewarm, gently flowing water for at least 30 minutes while holding the eyelids open. A neutral saline solution may be used as soon as it is available. If necessary, continue flushing during transport to an emergency care facility. Take care not to rinse contaminated water into the unaffected eye or onto face. Quickly transport the victim to an emergency care facility.
Ingestion| If ingestion of contents of an open battery occurs, never give anything by mouth if the victim is rapidly losing consciousness, or is unconscious or convulsing. Have the victim rinse mouth thoroughly with water. DO NOT INDUCE VOMITING. Have the victim drink 60 to 240 mL (2-8 oz.) of water. If vomiting occurs naturally, have the victim lean forward to reduce risk of aspiration. Have the victim rinse their mouth with water again.

Quickly transport the victim to an emergency care facility.

Section 5 – Fire-fighting Measures

Flammable Properties| If this battery has been ruptured, the electrolyte solution contained within the battery would be flammable. Like any sealed container, battery cells may rupture when exposed to excessive heat; this could result in the release of flammable or corrosive materials.
---|---
Suitable extinguishing

Media

|

Use extinguishing media suitable for the materials that are burning.

---|---
Unsuitable

extinguishing Media

|

Not available

Explosion

Data

| Sensitivity to Mechanical Impact: This may result in rupture in extreme cases

Sensitivity to Static Discharge: Not Applicable

Specific Hazards arising from

the chemical

| Fires involving Cylindrical Lithium-ion Cell are controlled with water. When water is used, however, hydrogen gas may evolve. In a confined space, hydrogen gas can form an explosive mixture. In this situation, smothering agents are recommended

to extinguish the fire

Protective Equipment and

precautions

| As for any fire, evacuate the area and fight the fire from a safe distance. Wear a pressure-demand, self-contained breathing apparatus and full protective gear. Fight fire from a protected location or a safe distance. Use NIOSH/MSHA- approved full-face self-contained breathing apparatus (SCBA) with full protective gear.
for firefighters|
---|---
NFPA| Health: 0 Flammability: 0 Instability: 0

Section 6 – Accidental Release Measures

Personal Precautions, protective equipment, and emergency procedures| Restrict access to area until completion of clean-up. Do not touch the spilled material. Wear adequate personal protective equipment as indicated in Section 8.
---|---
Environmental Precautions| Prevent material from contaminating soil and from entering sewers or waterways.
Methods and materials for Containment| Stop the leak if safe to do so. Contain the spilled liquid with dry sand or earth. Clean up spills immediately.
Methods and materials for cleaning up| Absorb spilled material with an inert absorbent (dry sand or earth). Scoop contaminated absorbent into an acceptable waste container. Collect all contaminated absorbents and dispose of them according to the directions in Section 13. Scrub the area with detergent and water; collect all contaminated wash water for proper disposal.

Section 7 – Handling and Storage

Handling| Don’t handle Cylindrical Lithium-ion Cell with metalwork. Do not open, disassemble, crush or burn the battery. Ensure good ventilation/ exhaustion at the workplace.
Prevent the formation of dust.
Information about protection against explosions and fires: Keep ignition sources away- Do not smoke.
---|---
Storage| If the Cylindrical Lithium-ion Cell is subject to storage for such a long term as more than 3 months, it is recommended to recharge the Cylindrical Lithium-ion Cell periodically.

3 months: -10 ° C~+40 ° C, 45 to 85%RH

And recommended at 0 ° C~+35 ° C for long period storage.

The capacity recovery rate in the delivery state (50% capacity of fully charged) after storage is assumed to be 80% or more.

 | Do not store Cylindrical Lithium-ion Cell haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
Keep out of reach of children.
Do not expose Cylindrical Lithium-ion Cells to heat or fire. Avoid storage in direct sunlight.
Do not store together with oxidizing and acidic materials.
---|---

Section 8 – Exposure Controls and Personal Protection

Engineering Controls| Use local exhaust ventilation or other engineering controls to control sources of dust, mist, fumes and vapor.
Keep away from heat and open flame. Store in a cool, dry place.
---|---
Personal Protective Equipment| Respiratory Protection: Not necessary under normal conditions.
Skin and body Protection: Not necessary under normal conditions, Wear neoprene or nitrile rubber gloves if handling an open or leaking battery.
Hand protection: Wear neoprene or natural rubber material gloves if handling an open or leaking battery.
Eye Protection: Not necessary under normal conditions, Wear safety glasses if handling an open or leaking battery.
Other Protective Equipment| Have a safety shower and eye wash fountain readily available in the immediate work area.
Hygiene Measures| Do not eat, drink, or smoke in the work area. Maintain good housekeeping.

Section 9 – Physical and Chemical Properties

Physical State

| Form: Solid
---|---
Color: Blue
Odor: Odorless
Change in condition:|
---|---
pH, with an indication of the concentration| Not applicable
Melting point/freezing point| Not available.
Boiling Point, initial boiling point and Boiling

range:

| Not available.
Flash Point| Not available.
Upper/lower flammability or explosive limits| Not available.
Vapor Pressure:| Not applicable
Vapor Density: (Air = 1)| Not applicable
Density/relative density| Not available.
Solubility in Water:| Insoluble
n-octanol/water partition coefficient| Not available.
Auto-ignition temperature| 130 ° C
Decomposition temperature| Not available.
Odout threshold| Not available.
Evaporation rate| Not available.
Flammability (soil, gas)| Not available.
Viscosity| Not applicable

Section 10 – Stability and Reactivity

subject the Cylindrical Lithium-ion Cell to mechanical shock.
Vibration encountered during transportation does not cause leakage, fire or explosion.
Do not disassemble, crush, short or install with Incorrect polarity. Avoid mechanical or electrical abuse.
Incompatible Materials| Not Available
Hazardous Decomposition Products| This material may release toxic fumes if burned

or exposed to fire

Possibility of Hazardous Reaction| Not Available

Section 11 – Toxicological Information

Irritation| The risk of irritation occurs only if the cell is mechanically, thermally, or electrically abused to the point of compromising the enclosure. If this occurs, irritation to the skin, eyes and respiratory tract may occur.
---|---
Sensitization| Not Available
Neurological Effects| Not Available
Teratogenicity| Not Available
Reproductive Toxicity| Not Available
Mutagenicity (Genetic Effects)| Not Available
Toxicologically Synergistic Materials| Not Available

Section 12 – Ecological Information

General note:| Water hazard class 1(Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach groundwater, water course or sewage system.
---|---
Anticipated behavior of a chemical product in the environment/possible environmental impace/ecotoxicity| Not Available
Mobility in soil| Not Available
Persistence and Degradability| Not Available
---|---
Bioaccumulation potential| Not Available
Other Adverse Effects| Not Available

Section 13 – Disposal Considerations

Product disposal recommendation: Observe local, state and federal laws and regulations. Packaging disposal recommendation: Be aware that discarded batteries may cause fire, tape the battery terminals to insulate them. Don’t disassemble the battery. Completely discharge containers (no teardrops, no powder rest, scraped carefully). Containers may be recycled or reused. Observe local, state, and federal laws and regulations.

Section 14 – Transport Information

The Cylindrical Lithium-ion Cell (18650-2500mAh) has passed the UN 38.3 test and is classified as non-dangerous goods and also complies with the UN Recommendations on the Transport of Dangerous Goods; IATA Dangerous Goods regulations, and applicable U.S. DOT regulations for the safe transport of Cylindrical Lithium-ion Cell.
The Cylindrical Lithium-ion Cell is transported according to the PACKING INSTRUCTION 965 Section ⅠB of IATA DGR 62nd edition (Proper shipping name and UN ID number: LITHIUM ION BATTERIES, UN No.: UN3480).
However, the Cylindrical Lithium-ion Cell may also be transported according to the PACKING

• INSTRUCTION 966 Section Ⅱof IATA DGR 62nd edition (Proper shipping name and UN ID number: LITHIUM ION BATTERIES PACKED WITH EQUIPMENT, UN No.: UN3481) or PACKING
• INSTRUCTION 967 Section Ⅱof IATA DGR 62nd edition (Proper shipping name and UN ID number: LITHIUM ION BATTERIES CONTAINED IN EQUIPMENT, UN No.: UN3481).

More information concerning shipping, testing, marking, and packaging can be obtained from label master at http://www.labelmaster.com/.
Each package must be labeled with a Lithium Battery handling label.
Li-ion batteries can be treated as “Non-dangerous goods” under the United Nations Recommendations on the Transport of Dangerous Goods, Special Provision 188, provided that packaging is strong and prevent the products from short- circuit.
About transport, the following regulations are cited and considered:

• The International Civil Aviation Organization (ICAO) Technical Instructions (2021-2022 edition).
• The International Air Transport Association (IATA) Dangerous Goods Regulations (62nd edition).
• The International Maritime Dangerous Goods (IMDG) Code (Amdt. 39-18).
• The US Hazardous Materials Regulation (HMR) under a final rule issued by RSPA
• The Office of Hazardous Materials Safety within the US Department of Transportation’s (DOT) Research and Special Programs Administration (RSPA)

Section 15 – Regulatory Information

OSHA hazard communication standard (29 CFR 1910.1200) Hazardous ∨ Non- hazardous

Section 16 – Other Information

The information above is believed to be accurate and represents the best information currently available to us. However, NTEK makes no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. Although reasonable precautions have been taken in the preparation of the data contained herein, it is offered solely for your information, consideration and investigation. This material safety data sheet provides guidelines for the safe handling and use of this product; it does not and cannot advise on all possible situations, therefore, your specific use of this product should be evaluated to determine if additional precautions are required. The data/information contained herein has been reviewed and approved for general release on the basis that this document contains no export-controlled information.

FAQs

Q: How many speed settings does the Fusion Pro 18650-2500mAh Percussion Therapy Massager offer?

A: The Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun offers multiple speed settings, allowing users to customize the intensity of the massage.

Q: What is the battery capacity of the Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun?

A: The Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun features a battery capacity of 2500mAh, providing long-lasting usage between charges.

Q: How heavy is the Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun?

A: The Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun is designed to be lightweight and ergonomic, making it easy to handle during extended massage sessions.

Q: Is the Fusion Pro 18650-2500mAh suitable for professional chiropractic use?

A: Yes, the Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun is designed for both professional chiropractic use and personal spa experiences, offering therapeutic benefits.

Q: What type of battery does the Fusion Pro 18650-2500mAh use?

A: The Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun utilizes a 18650 lithium-ion battery with a capacity of 2500mAh for long-lasting performance.

Q: Can the Fusion Pro 18650-2500mAh be used for deep tissue massage?

A: Absolutely, the Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun is effective for deep tissue massage, helping to relieve muscle tension and pain.

Q: Does the Fusion Pro 18650-2500mAh come with different massage heads?

A: Yes, the Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun includes various massage heads to target different muscle groups and provide a versatile massage experience.

Q: Is the Fusion Pro 18650-2500mAh Massager Gun portable?

A: Yes, the Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun is portable and comes with a carrying case, making it convenient for travel and on-the-go use.

Q: Is the Fusion Pro 18650-2500mAh Massager Gun quiet during operation?

A: The Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun is designed to operate quietly, making it suitable for use in a spa or therapeutic setting without causing disturbance.

Q: How long does the battery last on the Fusion Pro 18650-2500mAh Massager Gun?

A: The 2500mAh battery in the Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun offers extended usage, but the actual battery life depends on the speed setting and usage pattern.

Q: What is the warranty period for the Fusion Pro 18650-2500mAh Massager Gun?

A: The warranty period for the Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun varies, so it's best to check with the manufacturer or retailer for specific warranty information.

Q: Can the Fusion Pro 18650-2500mAh be used on all areas of the body?

A: Yes, the Fusion Pro 18650-2500mAh Percussion Therapy Massager Gun is designed for full-body use, from back and shoulders to legs and arms, providing versatile pain relief and relaxation.

Video-Why Fusion Black Pro Massage Gun?

Download this pdf manual:Fusion Pro 18650-2500mAh Percussion Therapy Chiropractor Spa Massager Gun User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>