beatXP PULSE XPods Bluetooth True Wireless In Ear Ear Buds User Manual

beatXP PULSE XPods Bluetooth True Wireless In Ear Ear Buds

Wireless Earphones

Please read the manual carefully before using the product and keep it safe for future references

Know Your Device
Thank you for purchasing Pulse Xpods. This user manual will assist you with how to make the best use of your XPods

What’s in the Box

• 1 X Charging Case
• 1 X Type-C Cable
• 2 X Bluetooth Earbuds
• 2 X Extra Eartips (2 Pairs)
• 1 X User Manual Card
• 1 X Product Catalogue
• 1 X Sticker
• 1 X Offer Card
• 1 X Warranty Card

Instructions

How To Connect?

1. Take your earbuds out of the case to power them ON.
2. Turn ON the Bluetooth on your mobile phone and search for active devices.
3. Select beatXP Pulse XPods. Now your earbuds are connected to your phone and are ready to use.

Usage Guidelines

1. The earbuds need to be fully charged prior to first-time use. If you’re not using the product for a long time, make sure you charge it every 30 days to keep the product active.
2. Use the earbuds at a comfortable hearing volume. This prevents any hearing damage. When you first use this product, keep the volume low. Put the earbuds on and gradually increase the volume.
3. Avoid using the earbuds while driving.
4. For safety purposes, avoid using the earbuds in environments where you need to be aware of the surrounding noise.
5. This product is assembled using small parts, hence keeping it out of the reach of children.
6. This product is assembled using magnetic components. Please consult your doctor if you feel it’s affecting any implantable medical equipment.
7. If the product seems to not be working, please contact customer support. Don’t try to fix it yourself.
8. It is recommended to dispose of the water batteries properly by abiding by local regulations.
9. Any repair or maintenance should be done by authorized personnel to avoid the warranty being void.
10. It is not advised to use high-voltage smartphone chargers. However, chargers with a capacity of 5V-10V can be used to charge XPods.

Charging Earbuds

• Charging: When put into the charging case, the white LED of the earphones is turned ON, indicating that the earbuds are charging.
• Fully Charged: When the earbuds are fully charged, the LED of the earbuds will turn OFF.

Charging the Case

• Charging: Plug in the TYPE-C charging cable to charge the case. The white LED of the charging case will start flashing, indicating that the case is charging.
• Fully Charged: When fully charged, the white LED of the charging case will stop flashing.

Earbuds

Charging Case

Product Specifications

Touch Controls

Music

• One Tap: Play/Pause
• Double Tap: Next Track
• Triple Tap: Previous Track

Calling

• One Tap : Answer Call Double
• Tap: End / Reject Call

AI Voice Assistant
Press and Hold for 2s

Reset
Five Times Tap

Mode Change
Four Times Tap

(Both Earbuds)
Buds ON/OFF

• Automatically ON when removed from the case,
• OFF when the buds are put into the case.

Troubleshooting

1. Unable to Power ON
   Try charging the earbuds for 30 min and try again.

2. Unable to Pair
   Go to the Bluetooth Settings on your mobile phone, click on Forget Device
   for beatXP Pulse XPods, and put the case on charge. After 30-45 minutes, try again.

3. Unable to Connect to Mobile
   Place earbuds into the charging case. Turn OFF Bluetooth on your mobile and Turn it ON again. Take the earbuds out of the case and try again.

4. Unable to Charge
   Ensure the earbuds are properly placed in the charging case. If not, gently press them in and clean the charging pinpoint.

5. Only one earbud working/Either of the one not working simultaneously
   Go to your mobile phone’s Bluetooth Menu click on Forget Device or Disconnect your earphones and put them back into the charging case. Then take the earbuds out of the case and try again.

FAQ

Frequently Asked Questions (FAQ)

• Q: How long does it take to fully charge the earbuds?
• A: It takes approximately 1.5 hours to fully charge the earbuds.
• Q: How long does the battery last on a single charge?
• A: The earbuds have a playtime of up to 40 hours on a single charge.
• Q: Can I use the earbuds while swimming?
• A: No, the earbuds have an IPX5 water resistance rating, which means they are resistant to sweat and light rain, but not suitable for swimming.
• Q: Can I use the earbuds with voice assistants like Siri or Google Assistant?
• A: Yes, you can activate the AI voice assistant by pressing and holding the touch controls for 2 seconds.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>