beatXP Wave XPods Bluetooth True Wireless Ear Buds User Manual
- June 13, 2024
- beatXP
Table of Contents
beatXP Wave XPods Bluetooth True Wireless Ear Buds
Product Information
- Product Name: Wave XPods
- Product Type: Wireless Earphones
- Model: beatXP Wave Xpods
- Bluetooth Version: 5.3
- Mic: Quad Mic
- Frequency Response Range: 20Hz-20KHz
- Charging Port: Type-C
- Charging Time: 50 minutes for Earphones; 1.5-2 hours for the Charging Case
- Playtime: Up to 50 hours
- Gaming Mode: Yes, Low Latency up to 40 ms
- Battery Capacity: Earphones: 40mAh; Charging Case: 380mAh
- IPXX Water & Dust Resistance: IPX5
- Drivers: 11mm
Product Usage Instructions
How To Connect?
- Take your earbuds out of the case to power them ON.
- Turn ON the Bluetooth on your mobile phone and search for active devices.
- Select beatXP Wave XPods. Now your earbuds are connected to your phone and are ready to use.
Usage Guidelines
- The earbuds need to be fully charged prior to first-time use. If you’re not using the product for a long time, make sure you charge it every 30 days to keep the product active.
- Use the earbuds at a comfortable hearing volume. This prevents any hearing damage. When you first use this product, keep the volume low. Put the earbuds on and gradually increase the volume.
- Avoid using the earbuds while driving.
- For safety purposes, avoid using the earbuds in environments where you need to be aware about the surrounding noise.
- This product is assembled using small parts, hence keep it out of the reach of children.
- This product is assembled using magnetic components. Please consult your doctor if you feel it’s affecting any implantable medical equipment.
- If the product seems to not be working, please contact customer support. Don’t try to fix it yourself.
- It is recommended to dispose of the water-batteries properly by abiding by local regulations.
- Any repair or maintenance should be done by authorized personnel to avoid the warranty being void.
- It is not advised to use high voltage smartphone chargers. However, chargers with a capacity of 5V-10V can be used to charge XPods.
Charging Earbuds
- Charging: When put into the charging case, the red LED of earphones is turned ON, indicating that the earbuds are charging.
- Fully Charged: When the earbuds are fully charged, the LED of the earbuds will turn OFF.
Charging the Case
- Charging: Plug-in the TYPE-C charging cable to charge the case. The red LED of the charging case will start flashing, indicating that the case is charging.
- Fully Charged: When fully charged, the red LED of the charging case will stop flashing.
Touch Controls
Music:
- One Tap : Play/Pause
- Double Tap: Next Track
- Triple Tap: Previous Track
Gaming Mode ON/OFF:
- Press and Hold for 5 seconds
Calling:
- One Tap: Answer/End Call
- Double Tap: Reject Call
INSTRUCTION
Know Your Device
Thank you for purchasing Wave XPods. This user manual will assist you about
how to make the best use of your XPods.
What’s in the Box
- 1 X Charging Case
- 1 X Type-C Cable
- 2 X Bluetooth Earbuds
- 2 X Extra Eartips (2 Pairs)
- 1 X User Manual Card
- 1 X Product Catalogue
- 1 X Sticker
- 1 X Offer Card
- 1 X Warranty Card
Instructions
How To Connect?
- Take your earbuds out of the case to power them ON.
- Turn ON the Bluetooth on your mobile phone and search for active devices.
- Select beatXP Wave XPods. Now your earbuds are connected to your phone and are ready to use.
Usage Guidelines
- The earbuds need to be fully charged prior to first-time use. If you’re not using the product for a long time, make sure you charge it every 30 days to keep the product
- Use the earbuds at a comfortable hearing This prevents any hearing damage. When you first use this product, keep the volume low. Put the earbuds on and gradually increase the volume.
- Avoid using the earbuds while
- For safety purposes, avoid using the earbuds in environments where you need to be aware about the surround- ing
- This product is assembled using small parts, hence keep it out of the reach of
- This product is assembled using magnetic components. Please consult your doctor if you feel it’s affecting any implantable medical
- If the product seems to not be working, please contact customer Don’t try to fix it yourself.
- It is recommended to dispose the water-batteries properly by abiding to local
- Any repair or maintenance should be done by authorized personnel to avoid the warranty being
- It is not advised to use high voltage smartphone However, chargers with a capacity of 5V-10V can be used to charge XPods.
Charging Earbuds
- Charging: When put into the charging case, the red LED of earphones are turned ON, indicating that the earbuds are charging.
- Fully Charged: When the earbuds are fully charged, the LED of earbuds will turn OFF.
Charging the Case
- Charging: Plug-in the TYPE-C charging cable to charge the case. The red LED of the charging case will start flashing, indicating that the case is charging.
- Fully Charged: When fully charged, the red LED of the charging case will stop flashing.
Earbuds
- Red LED ON
- Red LED OFF
- Red LED flasing once each 8s
- Charging
- Fully Charged
- Low Battery
Charging Case
- Red LED Flashing
- Red LED ON
- White LED flasing 4s then OFF
- Charging
- Fully Charged
- Low Battery
Product Specifications
Model | Wave XPods |
---|---|
Bluetooth Version | 5.3 |
Mic | Quad Mic |
Frequency Response Range | 20Hz-20KHz |
Charging Port | Type-C |
Charging Time | ≈50Mins for Earphones; 1.5-2Hrs for the Charging Case |
Playtime | 50Hrs |
Gaming Mode | Yes, Low Latency up to 40 ms |
Battery Capacity | Earphones: 40mAh; Charging Case: 380mAh |
IPXX Water & Dust Resistance | IPX5 |
Drivers | 11mm |
Touch Controls
Music
- One Tap : Play/Pause
- Double Tap : Next Track
- Triple Tap : Previous Track
Gaming Mode ON/OFF
- Press and Hold for 5s
Calling
- One Tap : Answer/End Call
- Double Tap : Reject Call
AI Voice Assistant
- Press and Hold for 2s
Reset
- Press and Hold for 5s (Both earbuds before connecting to device)
Buds ON/OFF
Automatically ON when open the charging case’s top cover or removed from the
case, OFF when the buds are put into the case and close the case’s top cover.
Troubleshooting
-
Unable to Power ON
Try charging the earbuds for 30 min and try again. -
Unable to Pair
Go to the Bluetooth Settings on your mobile phone, click on Forget Device for beatXP Wave XPods and put buds into the case on charge. After 30-45 minutes, try again. -
Unable to Connect to Mobile
Place earbuds into the charging case. Turn OFF Bluetooth on mobile and Turn ON again. Take earbuds out of the case and try again. -
Unable to Charge
Ensure the earbuds are properly placed in the charging case. If not, gently press them in and clean the charging pin point. -
Only one earbud working/Either of the one not working simultaneously
Please read the manual carefully before using the product and keep it safe for future references.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>