beatXP Vibe Wireless Earphones User Manual
- June 13, 2024
- beatXP
Table of Contents
VIBE
USER MANUAL
Please read the manual carefully before using the product and keep it safe for future references.
Know Your Device
Thank you for purchasing Vibe Xpods. This user manual will assist you about how to make the best use of your XPods.
What’s in the Box
- 1 X Charging Case
- 1 X Type-C Cable
- 2 X Bluetooth Earbuds
- 2 X Extra Eartips (2 Pairs)
- 1 X User Manual Card
- 1 X Product Catalogue
- 1 X Sticker
- 1 X Offer Card
- 1 X Warranty Card
Instructions
How To Connect?
- Take your earbuds out of the case to power them ON.
- Turn ON the Bluetooth on your mobile phone and search for active devices.
- Select beatXP Vibe XPods. Now your earbuds are connected to your phone and are ready to use.
Usage Guidelines
- The earbuds need to be fully charged prior to first-time use. If you’re not using the product for a long time, make sure you charge it every 30 days to keep the product active.
- Use the earbuds at a comfortable hearing volume. This prevents any hearing damage. When you first use this product, keep the volume low. Put the earbuds on and gradually increase the volume.
- Avoid using the earbuds while driving.
- For safety purposes, avoid using the earbuds in environments where you need to be aware about the surrounding noise.
- This product is assembled using small parts, hence keep it out of the reach of children.
- This product is assembled using magnetic components. Please consult your doctor if you feel it’s affecting any implantable medical equipment.
- If the product seems to not be working, please contact customer support. Don’t try to fix it yourself.
- It is recommended to dispose the water-batteries properly by abiding to local regulations.
- Any repair or maintenance should be done by authorized personnel to avoid the warranty being void.
- It is not advised to use high voltage smartphone chargers. However, chargers with a capacity of 5V-10V can be used to charge XPods.
Charging Earbuds
Charging: When put into the charging case, the white LED of earphones are
turned ON, indicating that the earbuds are charging.
Fully Charged: When the earbuds are fully charged, the LED of earbuds
will turn OFF.
Charging the Case
Charging: Plug-in the TYPE-C charging cable to charge the case. The green
LED of the charging case will start flashing, indicating that the case is
charging.
Fully Charged: When fully charged, the green LED of the charging case
will be ON.
Earbuds
White LED flashes 3 times
White LED flashes 3 times
White LED on the left & right earbud remains ON for 1s
| Power ON
---|---
| Power OFF/Low Battery
| Reset
Charging Case Battery Level
White light flashing once | 0% – 25% |
---|---|
White light flashing twice | 26% – 50% |
White light flashing 3 times | 51% – 75% |
White light flashing 4 times | 76% – 100% |
Charging the Case
Green LED Flashing Charging
Green LED Always ON Fully Charged
Product Specifications
Model | Vibe XPods |
---|---|
Bluetooth Version | 5.3 |
Mic | Quad Mic |
Frequency Response Range | 201-1z-20K1-1z |
Charging Port | Type-C |
Charging Time | =1.51-1.51-Irs for Earphones;1.5-21-Irs for Charging Case |
Playtime | 60I-I rs |
Gaming Mode | Yes, Low Latency up to 40 ms |
Battery Capacity | Earphones: 35mAh; Charging Case: 430mAh |
IPXX Water & Dust Resistance | IPXS |
Drivers | 11mm |
Touch Controls
Music
One Tap : Play/Pause
Double Tap : Next Track
Triple Tap : Previous Track
Gaming Mode ON/OFF
Press and Hold for 5s
Calling
One Tap : Answer/End Call
Double Tap : Reject Call
AI Voice Assistant
Press and Hold for 2s
Reset
Press and Hold for 10s
(Both Earbuds)
Buds ON/OFF
Automatically ON when removed from the case,
OFF when the buds are put into the case.
Troubleshooting
-
Unable to Power ON
Try charging the earbuds for 30 min and try again. -
Unable to Pair
Go to the Bluetooth Settings on your mobile phone, click on Forget Device for beatXP Vibe XPods and put the case on charge. After 30-45 minutes, try again. -
Unable to Connect to Mobile
Place earbuds into the charging case. Turn OFF Bluetooth on mobile and Turn ON again. Take earbuds out of the case and try again. -
Unable to Charge
Ensure the earbuds are properly placed in the charging case. If not, gently press them in and clean the charging pin point. -
Only one earbud working/Either of the one not working simultaneously
Go to your mobile phone’s Bluetooth Menu and click on Forget Device or Disconnect your earphones and put them back into the charging case. Then take the earbuds out of the case and try again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>