TROX TRS-R Ventilation Grille Instructions

June 15, 2024
TROX

TROX TRS-R Ventilation Grille

Product Specifications

  • Product Name: TRS-R (Circular Duct Installation)
  • Grille Type: Angled front border to match circular duct profiles
  • Blade Type: Individually adjustable vertical blades
  • Technology: Rectangular
  • Material: Galvanised steel

Product Usage Instructions

Installation

To install the TRS-R grille for circular duct installation, please follow the steps below:

  1. Ensure that the circular duct is properly installed and secured.
  2. Place the TRS-R grille on the circular duct, aligning the angled front border with the duct profile.
  3. Use appropriate screws or fasteners to secure the grille to the duct. Make sure it is firmly attached.
  4. Adjust the individually adjustable vertical blades to your desired position. These blades can be moved up or down for optimal air direction control.

Cleaning and Maintenance

To keep your TRS-R grille in good condition, regular cleaning and maintenance are recommended. Follow these guidelines:

  1. Turn off the ventilation system before cleaning the grille.
  2. Use a soft cloth or sponge dampened with mild soap or a non-abrasive cleaner to gently wipe the grille surface. Avoid using harsh chemicals or abrasive materials that may damage the galvanised steel.
  3. Rinse the grille with clean water and dry it thoroughly.
  4. Inspect the vertical blades for any dirt or debris buildup. If necessary, use a small brush or vacuum cleaner to remove any accumulated dirt.

Safety Precautions

When using the TRS-R grille, please keep the following safety precautions in mind:

  • Do not touch the grille while it is in operation as it may become hot.
  • Ensure that the ventilation system is properly maintained to prevent any potential issues.
  • Keep the area around the grille clear of any obstructions to ensure proper air circulation.

Frequently Asked Questions

  • Q: Can the TRS-R grille be used for rectangular duct installation?
  • A: No, the TRS-R grille is specifically designed for circular duct installation and may not be suitable for rectangular ducts.
  • Q: Can I paint the TRS-R grille to match my room decor?
  • A: Yes, you can paint the TRS-R grille with appropriate paint for metal surfaces. Ensure that you follow the manufacturer’s instructions and allow sufficient drying time before installation.
  • Q: Are replacement blades available for the TRS-R grille?
  • A: Yes, replacement blades are available. Please contact our customer support for assistance in obtaining the correct replacement blades for your TRS-R grille.

TRS-R (CIRCULAR DUCT INSTALLATION)

The type TRS-R grille consists of an angled front border to match circular duct] profiles, with counter punched holes and individually adjustable vertical blades.

Technology

  • rectangular
  • 10 – 1,665 l/s
  • 40 – 6,000 m¾/h|
  • 24 – 3,530 cfm|
  • L: 225 – 1,225 mm
  • H: 75 – 225 mm

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals