beatXP Wave Xpods Wireless Earphones User Manual

beatXP Wave Xpods Wireless Earphones

Product Information

Product Specifications

• Model: Wave XPods
• Bluetooth Version: 5.3
• Mic: Quad Mic
• Frequency Response Range: 20Hz-20KHz
• Charging Port: Type-C
• Charging Time: 50 minutes for Earphones; 1.5-2 hours for the Charging Case
• Playtime: 50 hours
• Gaming Mode: Yes, Low Latency up to 40 ms
• Battery Capacity: Earphones – 40mAh; Charging Case – 380mAh
• IPXX Water & Dust Resistance: IPX5
• Drivers: 11mm

FAQ

• Q: How often should I charge the earbuds if I’m not using them for a long time?
  • A: If you’re not using the product for a long time, make sure you charge it every 30 days to keep the product active.
• Q: Can I use the earbuds while driving?
  • A: No, it is recommended to avoid using the earbuds while driving for safety purposes.
• Q: Can children use this product?
  • A: This product contains small parts and should be kept out of the reach of children.
• Q: Can I use high voltage smartphone chargers to charge XPods?
  • A: It is not advised to use high voltage smartphone chargers. However, chargers with a capacity of 5V-10V can be used to charge XPods.

Product Usage Instructions

How To Connect?

1. Take your earbuds out of the case to power them ON.
2. Turn ON the Bluetooth on your mobile phone and search for active devices.
3. Select beatXP Wave XPods. Now your earbuds are connected to your phone and are ready to use.

Usage Guidelines

1. The earbuds need to be fully charged prior to first-time use. If you’re not using the product for a long time, make sure you charge it every 30 days to keep the product active.
2. Use the earbuds at a comfortable hearing volume. This prevents any hearing damage. When you first use this product, keep the volume low. Put the earbuds on and gradually increase the volume.
3. Avoid using the earbuds while driving.
4. For safety purposes, avoid using the earbuds in environments where you need to be aware of the surrounding noise.
5. This product is assembled using small parts, hence keep it out of the reach of children.
6. This product is assembled using magnetic components. Please consult your doctor if you feel it’s affecting any implantable medical equipment.
7. If the product seems to not be working, please contact customer support. Don’t try to fix it yourself.
8. It is recommended to dispose of the water-batteries properly by abiding by local regulations.
9. Any repair or maintenance should be done by authorized personnel to avoid the warranty being void.
10. It is not advised to use high voltage smartphone chargers. However, chargers with a capacity of 5V-10V can be used to charge XPods.

Charging Earbuds

• Charging: When put into the charging case, the red LED of the earphones is turned ON, indicating that the earbuds are charging.
• Fully Charged: When the earbuds are fully charged, the LED of the earbuds will turn OFF.

Charging the Case

• Charging: Plug-in the TYPE-C charging cable to charge the case. The red LED of the charging case will start flashing, indicating that the case is charging.
• Fully Charged: When fully charged, the red LED of the charging case will stop flashing.

Touch Controls

• Music: One Tap: Play/Pause, Double Tap: Next Track, Triple Tap: Previous Track
• Gaming Mode ON/OFF: Press and Hold for 5 seconds
• Calling: One Tap: Answer/End Call, Double Tap: Reject Call

Please read the manual carefully before using the product and keep it safe for future references.

Know Your Device

Thank you for purchasing Wave XPods. This user manual will assist you about how to make the best use of your XPods.

What’s in the Box

• 1 X Charging Case
• 1 X Type-C Cable
• 2 X Bluetooth Earbuds
• 2 X Extra Eartips (2 Pairs)
• 1 X User Manual Card
• 1 X Product Catalogue
• 1 X Sticker
• 1 X Offer Card
• 1 X Warranty Card

Instructions

How To Connect?

1. Take your earbuds out of the case to power them ON.
2. Turn ON the Bluetooth on your mobile phone and search for active devices.
3. Select beatXP Wave XPods. Now your earbuds are connected to your phone and are ready to use.

Usage Guidelines

1. The earbuds need to be fully charged prior to first-time use. If you’re not using the product for a long time, make sure you charge it every 30 days to keep the product active.
2. Use the earbuds at a comfortable hearing volume. This prevents any hearing damage. When you first use this product, keep the volume low. Put the earbuds on and gradually increase the volume.
3. Avoid using the earbuds while driving.
4. For safety purposes, avoid using the earbuds in environments where you need to be aware about the surrounding noise.
5. This product is assembled using small parts, hence keep it out of the reach of children.
6. This product is assembled using magnetic components. Please consult your doctor if you feel it’s affecting any implantable medical equipment.
7. If the product seems to not be working, please contact customer support. Don’t try to fix it yourself.
8. It is recommended to dispose the water-batteries properly by abiding to local regulations.
9. Any repair or maintenance should be done by authorized personnel to avoid the warranty being void.
10. It is not advised to use high voltage smartphone chargers. However, chargers with a capacity of 5V-10V can be used to charge XPods.

Charging Earbuds

• Charging: When put into the charging case, the red LED of earphones are turned ON, indicating that the earbuds are charging.
• Fully Charged: When the earbuds are fully charged, the LED of earbuds will turn OFF.

Charging the Case

• Charging: Plug-in the TYPE-C charging cable to charge the case. The red LED of the charging case will start flashing, indicating that the case is charging.
• Fully Charged: When fully charged, the red LED of the charging case will stop flashing.

Earbuds

• Red LED ON: Charging
• Red LED OFF: Fully Charged
• Red LED flasing once each 8s: Low Battery

Charging Case

• Red LED Flashing: Charging
• Red LED ON: Fully Charged
• White LED flasing 4s then OFF: Low Battery

Product Specifications

Touch Controls

Music

• One Tap: Play/Pause
• Double Tap: Next Track
• Triple Tap: Previous Track

Gaming Mode ON/OFF

• Press and Hold for 5s

Calling

• One Tap: Answer/End Call
• Double Tap: Reject Call

AI Voice Assistant

• Press and Hold for 2s

Reset

• Press and Hold for 5s
• (Both earbuds before connecting to device)

Buds ON/OFF

• Automatically ON when open the charging case’s top cover or removed from the case, OFF when the buds are put into the case and close the case’s top cover.

Troubleshooting

1. Unable to Power ON
   • Try charging the earbuds for 30 min and try again.
   • Go to the Bluetooth Settings on your mobile phone, click on Forget Device for beatXP Wave XPods and put buds into the case on charge. After 30-45 minutes, try again.
2. Unable to Pair
   • Place earbuds into the charging case. Turn OFF Bluetooth on mobile and Turn ON again. Take earbuds out of the case and try again.
3. Unable to Connect to Mobile
   • Ensure the earbuds are properly placed in the charging case. If not, gently press them in and clean the charging pin point.
4. Unable to Charge
   • Go to your mobile phone’s Bluetooth Menu and click on Forget Device or Disconnect your earphones and put them back into the charging case. Then take the earbuds out of the case and try again.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>