WilTec 64372 Heavy Duty Shelving Unit Instruction Manual
- June 15, 2024
- wiltec
Table of Contents
WilTec 64372 Heavy Duty Shelving Unit Instruction Manual
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury
we urge that our clients
take some basic safety precautions when using this device. Please read the
operation instructions carefully and make sure you have understood its
content. Keep these operation instructions safe.
Warning!
Accident and fatal injury risk for infants and children!
- Never let children with the packaging materials unsupervised. There is a risk of suffocation.
- Keep the product away from children.
- It is not a toy.
Mortal danger!
Make sure that you do not hit any electricity, gas, or water lines when you drill into the wall. If necessary, check with a pipe/cable detector before you drill into a wall.
Risk of injury!
- Ensure that all parts are undamaged and properly assembled/fitted. In the event of incorrect assembly/fitting, there is a risk of injury. Damaged parts can affect safety and function.
- Do not let children unsupervised. The product is not a climbing frame or tool. Make sure that people, especially children, do not climb up onto the product and/or lean against it. Injuries and/or damage may result.
- Care was taken during the manufacture of the product to avoid any sharp edges. However, handle the individual parts carefully so that any accidents/injuries during set-up and use are avoided.
- When assembling/fitting the product, please be sure to wear protective gloves.
- Ensure that the product is assembled/fitted only by competent adults.
- Only set the product on a level surface.
- Before using the product, check its stability.
- Do not load the product with more than 175 kg per shelf. Otherwise, there is a risk of injury and/or damage to the product.
- Ensure that the unit loading is evenly spread – avoid any overloading.
- After assembly, check that all parts are firmly connected together.
Parts list
Assembly
**Step 1
Step 2
Step 3
**
Operation Manual
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical
data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities,
please contact us.
The information contained in this document may alter at any time without previous notice. It is prohibited to copy or spread any parts of this document in any way without prior written allowance. All rights reserved.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided. If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in
our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
To return orders for exchange, repair, or other purposes, please use the following address. Attention! To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.
Returns Department
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15