ARDESTO SHR-B8WDR Electric Shaver Instruction Manual

ARDESTO SHR-B8WDR Electric Shaver

Product Information

• Product Name: Electric Shaver SHR-B8WDR
• Model Number: UA

Specifications

• Can be washed under a water tap
• Comes with a supplied adapter
• For indoor use only

Product Usage Instructions

Important Safety Instructions

Before operating the device, please read this manual carefully and save it for future reference. Use the device only as described in this instruction manual. Keep the original packaging materials, receipt, and warranty card during the warranty period. If it is necessary to transport the device, we recommend packing it in the original box.

Safety Warning

READ CAREFULLY AND STORE FOR FUTURE USE.

Cleaning the Cutting Head

The cutting head of this appliance can be washed under a water tap while holding the shaver in your hand. Warning! Always unplug the device before cleaning. Unplug the parts from the power cord before cleaning them in water.

Using the Device

1. Use the device only with the supplied adapter to avoid a dangerous situation.
2. The electric shaver and its adapter can only be used indoors. Do not use the electric shaver outdoors.
3. Do not place the adapter over sharp objects. Make sure that the cable is not damaged.

Frequently Asked Questions (FAQ)

Q: Can I use the electric shaver outdoors?

A: No, the electric shaver is designed for indoor use only.

Q: Can I clean the cutting head under running water?

A: Yes, the cutting head can be washed under a water tap while holding the shaver in your hand. Make sure to unplug the device before cleaning.

Q: What should I do if the power cord is damaged?

A: If the power cord is damaged, stop using the device and contact customer support for assistance.

Before operating the device, please read this manual carefully and save it for future reference. Use the device only as described in this instruction manual.
Keep the original packaging materials, receipt and warranty card during the warranty period. If it is necessary to transport the device, we recommend packing it in the original box.

SAFETY WARNING

READ CAREFULLY AND STORE FOR FUTURE USE.
This appliance can be used by children over the age of 8 and people with disabilities or lack of experience or knowledge, if they are under constant supervision or have been instructed in the safe use of the appliance and they understand the possible dangers. Cleaning and customer service should not be performed by children without supervision. Children shall not play with the appliance. Keep the product and its power cord out of reach of children under 8 years of age. The appliance must be powered only from a safe extra-low voltage according to the marking on the appliance.

The cutting head of this appliance can be washed under a water tap while holding the shaver in your hand

Warning! Always unplug the device before cleaning. Unplug the parts from the power cord before cleaning them in water.

Attention: Use the device only with the supplied adapter to avoid a dangerous situation.

1. The electric shaver and its adapter can only be used indoors. Do not use the electric shaver outdoors.
2. Do not place the adaptor over sharp objects. Make sure that the cable does not hang over the edge o  a table or that it is not touching a heated surface.
3. Ensure that the adaptor is not clamped or crimped.
4. Keep the adaptor dry. Be careful not to get water on the adapter.
5. Do not wind the adaptor around the handle of the appliance.
6. Do not connect and disconnect the adaptor to and from the power source with wet hands.
7. Before connecting the adaptor to a power source check that the voltage on its rating label corresponds to the voltage in the power socket to which you wish to connect it.
8. Do not use the electric shaver or the adapter if it is damaged.
9. If the device falls into water while charging, do not touch it and disconnect the adapter from the power source immediately. Contact an authorized service center to check the device.

Do not use or store the device at temperatures below 10 °C and above 50 °C. Electrolyte leaking from a battery can be caused by overloading the appliance or using it in extremely high temperatures. If battery fluid gets on the skin or eyes, the affected area should be washed immediately with water. Seek medical attention. The appliance is equipped with a built-in battery that can only be removed at a professional service center. Never attempt to remove it from the appliance yourself.

Attention! Never disassemble the appliance for the purpose of removing the battery. Never throw it into a fire. Incorrect use, risks releasing toxic substances or causing a fire or explosion.

Safety during using:

1. This device belongs to personal hygiene items, so it should not be used by other people.

2. This electric shaver is intended for home use only and is designed for shaving and trimming beards or whiskers and facial hair. The electric shaver is not intended for commercial purposes or for trimming animal fur.

3. For additional protection we recommend installation of current protection (RCD) with the nominal release current not exceeding 30 mA. Ask a control technician or an electrician for advice.

4. If the device has been stored or transported at low temperatures, keep the device at room temperature for 2 hours before use.

5. Do not leave the device switched on unattended.

6. Do not exceed the maximum continuous operation time of 30 minutes.

7. Check regularly, if the blades are not damaged or deformed.

8. If the shaving part of the device is blocked, it is necessary to switch off the device immediately and eliminate the cause.

9. When connected to the mains, do not use or store the electric shaver in areas where it may fall into water or be exposed to water jets/splashes.

10. We do not recommend using the electric shaver on parts of the face where there are open wounds or lacerations, burns, blisters, etc.

11. Use only the original accessories supplied with this electric shaver.

12. If it is necessary to use an extension cord, it must be undamaged and meet current standards.

13. Do not use the electric shaver in rooms where aerosol sprayers are used or where oxygen is released.

14. Do not expose the electric shaver to the outdoor environment, extreme temperatures, direct sunlight, excessive humidity or excessively dusty environments.

15. Do not place the electric shaver near heaters, open fires or other sources of heat.
    Warning: Keep the electric shaver dry.

16. The electric shaver may heat up during use or when it is being charged. This is completely normal. Always turn off the electric shaver and disconnect it from the power socket when not using it, when leaving it without supervision, before cleaning, maintenance or storage. Store the electric shaver and its adaptor in a dry environment.

17. Keep the electric shaver clean. Do not perform
    any maintenance on the electric shaver other than cleaning the individual components as described in chapter Cleaning and maintenance.

18. Do not use the electric shaver if it has fallen, if it is not functioning correctly or if it is damaged in any other way. Contact an authorized service center. Do not attempt to repair the device yourself as this may void the warranty.

EQUIPMENT:

• Electric shaver – 1 pc
• Protective cover – 1 pc
• Adaptor – 1 pc
• Cleaning brush – 1 pc
• Instruction manual (contains warranty card) – 1 pc

PRODUCT OVERVIEW

DESCRIPTION OF THE ELECTRIC SHAVER AND ITS ACCESSORIES

1. Shaving guard with shaving blade
2. Shaving head cover
3. Shaver head release buttons
4. On/Off switch
5. LCD display
6. Adaptor cord plug
7. Trimmer
8. Adaptor
9. Cleaning brush

PURPOSE OF USE

The electric shaver is intended for dry and wet shaving of beards and trimming of sideburns, moustaches or facial hair. Dry shaving is recommended for best results. The electric shaver is not intended for cutting synthetic hair or animal fur. The shaver is designed for household use and is not intended for commercial or other professional use.
CHARGING
Before using adaptor, ensure that the voltage of electricity supply is the same as that indicated on adaptor. Your shaver contains re-chargeable batteries and may be used cordless for approximately 70 minutes when the batteries are fully charged.

IMPORTANT NOTE: The batteries must be charged for a minimum of 2 hours for the first charge cycle. This will ensure the maximum life for the batteries.

1. Connect the cable of the plug-in mains adaptor to adaptor cord plug of the shaver.
2. Insert the plug-in mains adaptor (rated voltage range 100 -240V) into a mains outlet socket that meets the requirements of the device.
3. The LCD display on the shaver will light whilst charging.
4. Leave the shaver until fully charged, and LCD display would show 100% (approximately 90 mins if the batteries were fully discharged).
5. After charging, disconnect the adaptor from the mains to conserve power and store it in a safe place.

DIRECT DRIVE TECHNOLOGY

If the battery of the electric shaver is discharged (flat) or if it is discharged during cordless operation, the shaver can be plugged into mains power and can continue to be used. This is enabled by DIRECT DRIVE technology used on the electric shaver. Therefore, no need to wait for a minimum charge.

RECOMMENDATIONS FOR EXTENDING THE LIFETIME OF THE BATTERY

• In order for the built-in battery to serve you as long as possible, charge, use and store the electric shaver in a dry environment at an ambient temperature of 15-35°C. Lower or higher temperatures have a negative impact on the lifespan of the battery.
• Do not wait for the battery to become completely flat. It is better to charge the battery before it is completely flat.
• When the electric shaver is not used for an extended period of time, charge it at least once every 6 months.

OPERATION / SHAVING

1. Remove the protective cap from the shaving head.
2. Switch the shaver on by pressing the ON/OFF button. The LCD display would show the battery power level.
3. Press the shaver gently onto the skin at an angle of 90 degrees and guide it over the face against the direction of hair growth. Do not push too hard.
4. While shaving, use your free hand to stretch the skin in hard-to-reach places, such as on the chin. In this way you will achieve better shaving results.
5. To use the trimmer on the rear of the appliance, slide it up. After use, move it back.
6. Switch the shaver off by pressing the ON/OFF button for 2 seconds.
7. The shaver would be locked by pressing & holding the ON/OFF button about 3 seconds.
8. When you have finished shaving, clean the electric shaver according to the instructions in chapter Cleaning and maintenance.
9. To protect the shaving heads, put back the protective cap after cleaning.
10. When tap water symbol lights up, it means the shaver head should be cleaned.

Note: It may take your skin and facial hair two to three weeks to become accustomed to the new way of shaving. During this period, we recommend using the electric shaver every day.

LOW BATTERY POWER INDICATION

When the battery will have a low charge level (5%), battery level indicator will start flashing on the display.

SHAVING HEAD CLEANING INDICATOR

The shaver is equipped with a timer that adds up the operating time of the shaver (shaving time). When it reaches 10 minutes, the water tap symbol will light up to remind that it is necessary to clean the shaving head. If this happens, clean the shaver as soon as possible according to chapter CLEANING THE SHAVING HEAD. The next time you turn on the shaver, the timer will restart.

CLEANING AND MAINTENANCE

For hygiene reasons, clean the electric shaver after every use. Regular cleaning is also important to ensure the correct operation of the electric shaver and to extend the lifespan of the cutters. Turn off the electric shaver before cleaning it. Never clean the electric shaver when it is charging and connected to the power supply. For cleaning, do not use brushes with hard bristles, cleaning products with an abrasive effect, solvents, etc. Otherwise, the cleaned surface may be damaged.

CLEANING THE ELECTRIC SHAVER AND ADAPTER

The electric shaver unit can be cleaned using a clean dry cloth. In the event that it is very dirty, you can use a lightly dampened cloth. Then thoroughly wipe the cleaned surface dry. To clean the power cable and adapter, use a clean, dry cloth.

CLEANING THE SHAVING HEAD

Cleaning with the brush

Use the brush to clean away all hair and whisker remains from the shaving head. Press shaver head release buttons to remove the shaving head. Use the brush to remove dirt and any whiskers from the holder and the body of the electric shaver. Put the shaving head back into the holder.

Cleaning with water

Warning: Do not wash the electric shaver with water or immerse it in water while it is connected to the power supply. Turn the electric shaver upside down and submerge the shaving head in water. Turn on the electric shaver and allow it to run for approximately 30 seconds. Then turn it off and take the head out of the water. Using a fine cloth, dry the shaving head or allow it to dry naturally. Do not use paper towels or coarse towels to dry it as this could damage the shaving blades. For a thorough clean, the shaving head can be removed and washed under running water. Allow it to dry fully and then insert it back into the body of the electric shaver.

STORAGE

When you have finished using it, you can store the electric shaver with all its accessories in a suitable location out of children’s reach. Keep the electric shaver away from extreme temperatures, direct sunlight and excessive humidity. Do not use in an overly dusty environment. The manufacturer reserves the right to make changes in the technical characteristics and design of the products that do not impair the operational qualities.

CORRECT DISPOSAL OF THIS PRODUCT

Never dispose of the device with normal household waste. Dispose of the device through an authorized disposal company or an appropriate government agency. Please follow all applicable rules. If in doubt, contact your waste disposal company. Your local community or municipal government can provide information on how to dispose of the product properly. A recyclable lithium battery powers this device. When the device reaches the end of its useful life, remove the battery from the device before disposing of it. Dispose of the battery in accordance with local waste disposal requirements. If you have questions about disposal, please contact your local waste disposal agency. The packaging is recyclable. Dispose of the packaging environmentally.

Warranty conditions

The plant guarantees normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual. Service life of the product is 3 years. In order to avoid any misunderstanding we kindly ask you to carefully study the Owner’s Manual, the terms of warranty, and check the correctness of filling the Warranty Card. The Warranty Card is valid only if the following information is correctly and clearly stated: model, serial number of the product, date of sale, clear seals of the company-seller, signature of the buyer. The model and serial number of the product must correspond to those specified in the Warranty Card. If these terms are violated, and if the information specified in the Warranty Card is changed, erased or rewritten, the Warranty Card is considered invalid. Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user, and by specialists having the necessary qualification sent by USC or selling companies (on a paid basis). In this case, the person (the institution) installing the appliance shall be responsible for the correctness and quality of installation (setup). Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation, and for obtaining warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card. In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase. Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made in accordance with the law «On Protection of Consumers’ Rights». In the case of warranty repair the warranty period shall be extended for the period of repair and shipment.

WARRANTY CARD

Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular instrument. We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

1. Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
2. The service life of household appliances is 3 years.
3. The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
4. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
5. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
6.  The product is removed from warranty service in the following cases:
   • misuse and non-consumer use;
   • mechanical damage;
   • damage caused by the ingress of foreign objects, substances, liquids, insects;
   • damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
   • damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
   • when operating equipment in the power supply network with a missing single ground loop;
   • in case of violation of seals installed on the product;
   • lack of serial number of the device, or inability to identify it.
7. The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
8. The warranty period is 12 months from the date of sale.

Tear-off maintenance tickets are provided by an authorized service center. The completeness of the product is checked. I have read the terms of the warranty service, no complaints.

• Customer Signature ___

References

• Компания ERC: Сервис-центр(СЕРВІСНИЙ ЦЕНТР)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>