tp-link C420 Tapo Smart Wire Free Security Camera User Guide
- June 16, 2024
- tp-link
Table of Contents
tp-link C420 Tapo Smart Wire Free Security Camera
Product Information
Specifications
- Model: Smart Wire-Free Security Camera
- Manufacturer: Tapo
- Part Number: 7106510547 REV1.4.0
Product Usage Instructions
Mounting the Camera After Setup
- Choose a suitable location to mount the camera.
- Ensure the camera is within range of the Tapo Hub for a stable connection.
- Use the provided mounting accessories to securely attach the camera to the desired surface.
Charging the Battery
Method 1: Battery Itself
- Remove the battery from the camera.
- Connect the battery to a compatible charger.
- The LED indicator will show a steady orange light during charging.
- Once fully charged, the LED indicator will show a steady green light.
Method 2: Battery Inside Camera
- Ensure the camera is turned off.
- Connect the camera to a power source using the provided charging cable.
- The LED indicator will show a steady orange light during charging.
- Check the battery status in the Tapo app after setup to monitor the charging progress.
Set Up
- A Tapo Hub is required for setup. Make sure your Tapo Hub is successfully added via the Tapo app.
- Follow the instructions provided in the app to complete the setup process.
FAQ
Q: What is the purpose of the Tapo Hub?
A: The Tapo Hub is required for setup and provides a central connection point for the Smart Wire-Free Security Camera.
Q: How can I check the battery status?
A: You can check the battery status in the Tapo app after completing the setup process.
Visit www.tapo.com/support
for technical support, user guides, and more information
Setup Video
Scan QR code or visit
https://www.tp-link.com/support/setup-video/#cloud-cameras
*Images may differ from your actual products
Mount the Camera After Setup
Images may differ from the actual products.
Note: Images may differ from the actual products.
Charge the Battery
Method 1: Battery Itself
Method 2: Battery Inside Camera
*Check battery status in the Tapo app after setup.
Set Up
-
A Tapo Hub is required. Make sure your Tapo Hub is successfully added via the Tapo app.
-
Follow app instructions to complete setup.
Safety Information
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed.
- Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
- Adapter shall be easily accessible.
CAUTION!
Risk of fire or explosion if the battery is replaced by an incorrect type.
CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a
safeguard. Avoid disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a battery, that can result in an
explosion. Do not leave a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable liquid
or gas; Do not leave a battery subjected to extremely low air pressure that
may result in an explosion or the leakage of flammable liquid or gas.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at
https://www.tapo.com/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017.
The original UK Declaration of Conformity may be found at
https://www.tapo.com/support/ukca/.