Ampeak 20230804 2000 Watts Safe Power Inverter Instruction Manual
- June 15, 2024
- Ampeak
Table of Contents
2000 Watts
Safe Power Inverter
Instruction Manual
12-Volt DC to 115-Volt AC with Three AC Outlets,
Dual USB Ports
-
Indicator Light
-
LCD Display
-
Power Switch
-
USB Ports
-
Remote Control Port
(Remote Control Sold Separately) -
AC Outlets
- Positive (+) Ring Terminal
- Cooling Fan
- Negative (+) Ring Terminal
- Ground Wire
What Is Included?
One 2000 Watts Power Inverter
One Instruction Manual
Two Ring Terminal Cables
Easy Operation Steps
1. Open the terminal covers.
2. Connect the red positive (+) ring terminal cable to the red positive (+) terminals of the battery and inverter.
3. Connect the black negative (-) ring terminal cable to the black negative (-)terminals of the battery and inverter.
4. Turn on the inverter power switch and plug in your appliance.
Make sure the inverter is turned OFF when not in use.
Open the terminal covers method
1. Turn the plastic screw counter-clockwise with your finger or wrench.
2. Remove the plastic screws.
3. Remove the plastic cover and start wiring.
Specifications
Battery Input:
1
| Continuous Input Voltage: 12V
---|---
2
| DC Voltage Input Range: DC 11V~15V
3
| DC Input Low Voltage Shutdown: 9.5V±0.5V
4
| DC Input Overvoltage Protection: 16V±0.5V
5
| Input DC Fuse: 10*40A
Inverter Output:
1
| AC Output Voltage: AC 105V~125V
---|---
2
| Output Continuous Power: 2000 Watts
3
| Output Overload Power: 2200 Watts
4
| Output Surge Power: 4000 Watts
5
| AC Output Frequency: 60±1Hz
6
| Output Voltage Waveform: Modified Sine Wave
7
| Full Load Efficiency: ≥86%
8
| Inverter Overheat Protection: Internal Electronic Components of Inverter Temperature > 105°C/221°F
9
| USB Output Voltage: 5V
10
| USB Output Current: Dual 3.1A
11
| Operating Temperature: -10°C/14°F ~ 40°C/104°F
12
| Advice Storage Temperature: -20°C/-4°F~65°C/149°F
Questions & Answer:
1. Can I use the inverter with a 24V system?****
No, This model can only work with a 12V battery system.
2. Can I use this inverter to charge my batteries?****
No, The Ampeak 12V DC to 120VAC inverter can only convert DC power to AC power.
3. How do I hook up the Inverter? What size cable should I use, and is it included?****
When connecting the inverter to the battery always use the thickest wire available, in the shortest length practical. A pair of 4AWG 3ft cables with battery terminals is included in the package.
4. Can this powered by solar 100 or 200w?****
This inverter does not support pass through power delivery from a solar power source. However it would be able to support being powered from a battery bank that was being recharged through solar power.
5. Can this inverter work with lithium batteries?****
Yes, as long as the lithium battery is rated for 12V applications.
6. Does the inverter come with remote?****
No, the inverter remote is sold separately, you can search Ampeak inverter remote.
7. Does this inverter have shutdown feature?****
No, it does not have.
Attention:
The load is divided into resistive load and inductive load. If you need
the inverter to run the resistive load (laptops, TVs, electric cookers, etc.),
please choose the inverter with continuously higher power than the device’ s
rated power. It is best to use 80% of the rated power.
If you use microwaves, water pumps, air conditioners etc. inductive load, or
other appliances with motors or compressors, please choose the inverter with
continuous power that is 3 to 7 times higher than your appliances. For
refrigerators, we recommend using an option that is 10 times higher.
Safe Protections
Protection Name
| Audible Alarm
---|---
(1)
|
Battery Low Voltage Protection
| Input Voltage: 9.5V±0.5V
Alarm Sound “DI DI” (2 Sounds)
Continuous Alarm for 60 Seconds
(2)
|
Battery Over Voltage Protection
| Input Voltage: 16V±0.5V
Alarm Sound “DI DI DI” (3 Sounds)
Continuous Alarm for 60 Seconds
(3)
|
Output Overload Protection
| Output Wattage>2200W
Alarm Sound “DI DI DI DI” (4 Sounds)
Continuous Alarm for 60 Seconds
Allow Two Recovery, Program locked Permanently in the Third Time Restart
Inverter
(4)
|
Output Over Current Protection
| Output Electric Current>25 Amps
Alarm Sound “DI DI DI DI” (4 Sounds)
Continuous Alarm for 60 Seconds
(5)
|
Output Short Circuit Protection
| Alarm Sound DI DI DI DI” (4 Sounds)
Continuous Alarm for 60 Seconds
(6)
|
Inverter Overheat Protection
| Internal Electronic Components of Inverter Temperature >105°C/221°F
Alarm Sound “DI” (1 Sound)
Continuous Alarm for 30 Seconds
(7)
|
Inverter Overcool Protection
| Internal Electronic Components of Inverter Temperature <-10°C/14°F, Alarm Sound “DI” (1 Sound), Continuous Alarm for 30 Seconds
(8)
|
Inverter Low Voltage Protection
| Inverter Output Volts <80V, Alarm Sound “DI DI” (2 Sounds) Continuous Alarm for 60 Seconds
(9)
|
Inverter Over Voltage Protection
| Inverter Output Volts >140V, Alarm Sound “DI DI DI” (3 Sounds), Continuous Alarm for 60 Seconds
(10)
|
USB Short Circuit Protection
| No Alarm Remind
USB Ports Stop Working
(11)
|
Built-in Heat Dissipation
| When Inverter Internal Temperature>40°C/104°F, The Fan will start working
Troubleshooting
Problem
| Cause|
Solution
---|---|---
No Power, Led screen no indicator, Fans no run| Battery is defective| Replace
the battery
The inverter did not turn on| Turn on the inverter
Loose cable connection| Check the connection and tighten as required
Alarm is sounding (Led screen display protections)| BATLOW VOLTAGE| Charge the
battery
BATOVER VOLTAGE| Replace 12V battery
OVERLOAD| Reduce loads, decrease wattages
OVER CURRENT
SHORT CIRCUIT| Restart
OVERTER HEAT| Cool down inverter
OVERCOOL| Put inverter in working temperature
COMMWARN| Restart
VCCLOW VOLTAGE| Check the connection and tighten as required
DC OVERLOAD| Reduce loads, decrease wattages
DC OVER CURRENT
Water entered the unit| Water entered the unit| Disconnect and wipe the
inverter immediately
Battery run time is less than expected| AC product power consumption is
higher| The total watts needed by the AC products should be no more than the
inverter’s watt rating
Battery is old or defective| Replace the battery
Battery properly is not being charged| Some chargers are not able to fully
recharge a battery, Make sure you use a powerful charger
Battery does not have enough capacity| Use a battery with a higher amp-hour
rating
Indicator Light
- W-Green Light
- KW-Yellow Light
- Warning-Red Light
1. After connecting the inverter to the battery, the LED will initially display the input voltage. After 5 seconds, the Output(W) shows green light.
2. If power is being generated, the display will show the actual output power; otherwise, it will display 0W. After 5 seconds, it will switch to show the input voltage, and so forth.
3. When the Watts over 1000W, the indicator light switch yellow(KW), After 5 seconds, it will switch to show the input voltage, and so forth.
4. When there’s an error, the LED turns red (Warning) and displays the corresponding code: LUP (lowvoltage), OUP (overvoltage), OPP (short circuit), OLP (overcurrent), OCP (overtemperature), or OEP (overload).
5. If the corresponding error message appears, the solution is as follows:
LUP: DC power source is too low, recharge the battery.
OUP: The voltage input from the DC power source is too high, use the 12V DC
power source only.
OPP: If there is no voltage output from USB or AC and it has stopped working,
it may indicate that overcurrent has blown the fuse or MOSFETs of the product.
OLP: AC products are less than the wattage load of the inverter, but high
starting surge has caused overload shutdown. Use a product with starting surge
power within the inverter’s capability.
OCP: Allow the unit to cool down, improve air circulation around the unit;
Relocate unit to a cooler environment; Reduce load if continuous operation is
required.
OEP: AC products are less than the wattage load of the inverter, consider the
inverter an efficiency of 86%.For example, if you have a 1000W inverter with
an efficiency of 86%, it can only handle resistive electronic devices up to
860W. Use low-power electronic devices and check if the inverter is
functioning properly.
Limited Warranty
18-Month Limited Warranty Policy
18-Month Limited Warranty Policy is the only one that applies to this unit, and it sets forth all the responsibilities of Ampeak. There is no other warranty, other than those described herein. Any implied warranty of merchant ability or fitness for a particular purpose on this unit is limited in duration to the duration of this warranty. This unit is warranted to the original purchaser only to be free of defects in materials and workmanship for 18-month from the date of purchase without additional charge. The warranty does not extend to subsequent purchasers or users.
Ampeak will not be responsible for any amount of damage in excess of the retail purchase price of the unit under any circumstances. Incidental and consequential damages are specifically excluded from coverage under this warranty. This unit is not intended for commercial use. This warranty does not apply to damage to units from misuse or incorrect installation/connection. Misuse includes wiring or connecting to improper polarity power sources.
Return/Repair Policy
If you are experiencing any problems with your unit, please contact Ampeak Customer Service Department at: customer.services@ampeak.com returning the product to Amazon. After speaking to a customer service representative, if products are deemed non-working or malfunctioning, the product may be returned to amazon within 30 days of original purchase. Any defective unit that is returned to Amazon within 30 days of the date of purchase will be replaced free of charge or fully refunded at the buyer’s option.
If such a unit is returned more than 30 days but less than 18-month from the purchase date, the manufacturer will repair the unit or at its option, replace it, free of charge. If the unit is repaired, new or reconditioned replacement parts may be used, at the manufacturer’s option. A unit may be replaced with a new or reconditioned unit of the same or comparable design. The repaired or replaced unit will then be warranted under the terms of the remainder of the warranty period.
Limitations
This warranty does not cover accessories, such as adapters and batteries, damage or defects resulting from normal wear and tear(including chips, scratches, abrasions, discoloration, or fading due to usage or exposure to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized use or repair, neglect, misuse, abuse. failure to follow instructions for care and maintenance. fire and flood.
Important Safety Information
Safety Statement
It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of the device owner to keep this manual intact and in a convenient location for all to see and read. if the manual or product labels are lost or not legible, contact AMPEAK for replacements or an electronic edition. If the operator is not fluent in English, the product and safety instructions shall be read and discussed with the operator in the operator’s native language by the purchaser owned or his designee, making sure that the operator comprehends its contents.
READ ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING THIS PRODUCT!
Warning: Risk Of Shock, Fire, And Explosion.
The inverter produces the same potentially lethal AC power as normal household outlets. It is suggested that you treat it as a normal AC outlet.
- DO NOT insert foreign objects into the AC outlet, the USB port, or the ventilation hole.
- DO NOT use this product where there are flammable fumes or gases, such as in the bilge of a gasoline-powered boat, or near propane tanks.
- NEVER smoke or allow a spark or flame in the vicinity of the engine or batteries.
- Make sure the inverter wiring is of proper size and rating and in good condition.
Operating the inverter with damaged wiring may void warranty.
Caution: Personal Safety & Equipment Damage.
Keep Away From Children, This Is Not A Toy.
- DO NOT attempt to fix the unit by disassembling or modification. You can cause self-injury and disassemble and modifying the unit will void your warranty.
- Disconnect DC power source from the inverter, before attempting to service, clean, or operate on any circuits connected to the inverter. Simply turning OFF the switch of the inverter will not disconnect the power, thereby causing electric shock.
- Never connect the inverter to any power distribution systems or branch circuits.
- DO NOT make any electrical connections or disconnections in areas designated as ignition protected. This unit is NOT approved for ignition-protected areas.
- Connect the unit to a power source with a normal output of 12v DC ONLY. 6V battery voltages are too low and 24V battery voltages are too high, which will damage the unit.
- DO NOT use the inverter in temperatures above 14°F (-10°C) – 104°F (40°C).
- DO NOT expose this product to water, rain, snow, condensation, or spray.
- DO NOT connect the unit to live AC power circuits or there will be damage to the inverter.
- DO NOT connect any AC device which has its neutral conductor connected to the ground to the unit.
- DO NOT use the inverter with medical devices since it is not approved for medical applications.
- DO NOT permanently install the unit in the engine compartment. Certain chargers for small nickel-cadmium batteries can be damaged if connected to the inverter.
- DO NOT use the inverter beyond its rated wattage capacity. Add the total watts of all connected appliances and be sure the total is less than the inverter’s capacity.
This product may contain one or more chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. Wash hands thoroughly after handling.
NOTE:
If you are unsure about using your rechargeable appliance with the inverter,
contact the Ampeak:
customer.services@ampeak.com to determine the
rechargeable appliances’ compatibility with the inverter.
Help Centrel
Thank you for choosing Ampeak 2000 Watts Safe Power Inverter. Please read this instruction carefully as they contain important information, and safety requirements. If you have trouble understanding the instructions, or have any questions regarding its operation, please contact our friendly customer support team, via customer.services@ampeak.com
Facebook
ampeak
Official Website
www.ampeak.com
Amazon
www.amazon.com/ampeak
Documents / Resources
|
Ampeak 20230804 2000 Watts Safe Power
Inverter
[pdf] Instruction Manual
20230804, 20230804 2000 Watts Safe Power Inverter, 2000 Watts Safe Power
Inverter, Safe Power Inverter, Power Inverter, Inverter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>