CAYAMA Multifunctional Hand Held Steam Cleaner 2500W User Manual
- June 15, 2024
- CAYAMA
Table of Contents
CAYAMA Multifunctional Hand Held Steam Cleaner 2500W
CAYAMA STEAM CLEANER
Voltage : 110V
Water Tank Capacity : 1L
Power Cord Length: 2.5m
Steam Pressure : 3Bar
Steam Duration: about 1 hour
Steam Pipe Length: 2.2m
Package List
- Power Switch
- Adjusting Gear
- Water Inlet
- Indicator Light
- Steam Hose
- Power Cord
- Round Brush
- Steel brush
- Plastic brush
- Extra Washer
- Extension Tube
How to Use
Step 1
Adding water.
Detergent can be added for more thorough cleaning.
Make sure the solvent is completely dissolved to avoid clogging
Step 2
Plug in the power.
Step 3
Turn on the power switch.
Step 4
Adjust the steam regulating gear.
Step 5
Ready in 15-20 seconds and choose different steam nozzles and brushes
according to cleaning requirements.
Tips
If the spray gun head of the cleaner needs to be changed. A waterproof washer must be added before the copper nozzle of the spray gun is connected with the steam gun head and the extended spray nozzle.
When replacing the brush accessories, you must wait until the air vent is completely stopped and do not touch the jet switch to avoid burns.
Precautions for Use
- If you want to remove the grease and stubborn stains, please use the detergent on the dirty first!
- Please wear gloves to avoid burns.
- There is a preheating process when the steam mode is just started, and it is normal that water flows out at the beginning.
- There is NO trigger on the handle to stop the steam cleaner, please turn off the power switch if you need to stop the steam.
- Do not point the steam nozzle at people or animals.
- Do not clean items with a temperature resistance below 105℃.
- When cleaning glass products, it may crack due to uneven heating.
- The steam cleaner may have a delayed flow of hot water when they are turned off. Please point the steam gun at the sink or open space for 5-10 seconds when the steam function is turned off to avoid being scalded.
- After each use, drain the water in the tank, wipe off the water on the panel and the nozzle, make sure the panel of the main engine of the device is clean and tidy.
- If the steam nozzle is blocked by foreign matter during use, please twist the nozzle and remove the foreign matter (usually water-scale); if it still cannot be used normally, please turn off the power and contact us for repair.
- Never immerse the machine or steam gun in water.
Troubleshooting
| Issue | Cause of Failure | How to resolve |
|---|---|---|
| The indicator light is not on after plugging in | The plug is not inserted | |
| properly | Check and plug in properly | |
| The machine is not powered on or is powered off while working | Line load for | |
| plug mating is low | Replace the power strip with a higher load capacity | |
| The spray gun does not spray or sprays little water or the pressure is low | No | |
| water in the tank | Add water to the tank | |
| The pipe is blocked | Remove the debris from the filter screen | |
| The filter of inlet pipe is clogged | Remove the debris from the filter of the |
steam inlet pipe
No steam spraying when the steam mode is turned on, or the steam fluctuates,
not stable| The filter of steam inlet pipe is clogged| Remove the debris from
the filter of the steam inlet pipe
The machine goes into over-temperature protection| Wait for the machine to
cool down for 20-30 minutes
If you have any problem or need any help, please contact us via us_supportcare@163.com. We will reply to you within 24 hours and 100% solve your issue.
Customer Service
Email: us_supportcare@163.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>