Soundking KV Series Speaker Cabinet User Manual
- June 15, 2024
- Soundking
Table of Contents
USER MANUAL
KV Series Speaker Cabinet
SAFETY INSTRUCTIONS
READ THIS BEFORE YOU USE YOUR PRODUCT
-
Before connecting the A.C. power cord make sure the Voltage Selector is set for your local A.C. supply voltage.
For supplies between 220 and 240V ensure it is set to 230V.
For supplies between 110 and 120V ensure it is set to 115V. -
Only use the A.C. power cord / mains lead supplied with this product. Replace if it becomes damaged in any way.
-
Never operate without, or remove the safety ground (earth) from the A.C. Power cord mains lead.
-
Do not attempt to remove any screws or panels. There are no user serviceable parts inside.
-
Do not operate the unit next to heat sources such as radiators.
-
The unit should not be operated or stored near rain or moisture.
-
This equipment must not be exposed to dripping or splashing and no objects filled with liquids should be placed on top of it.
-
White the serial number in the box provided in the Warranty section for future reference.
-
If the unit gets damaged, has been dropped or appears to have developed a fault refer to the Service Information section for details.
WARNING: THIS APPARATUS MUST BE EARTHED (GROUNDED)
WEEE Mark
**** If you want to dispose of this product, do not mix with general
household waste. There are separate collection systems for used electronic
products in accordance with legislation under the WEEE Directive (Directive
2002/96/EC) and is effective only within the European Union.
System feature
KV speaker cabinet series consists of KV12A/KV15A/KV18SA active speaker
cabinet and KV12/KV15/KV18S passive speaker cabinet. This speaker cabinet
series is specially designed for Horizon 2012 mixer. All the speaker cabinets
have 15mm plywood to deliver delicate tone. All the speaker cabinets are light
weighted for convenient transportation.
1)Active speaker cabinet: the LF uses symmetrical ferrite magnet and the voice
coil uses heat-resisting material for the high power and heat dissipation. The
HF uses compression driver and AL diaphragm for delicate tone. The class D
power amplifier is powerful but light weighted. The ribbed 15mm plywood
cabinet eliminates the resonance inside.
KV12A—12″ Two-Way Powered Speaker Cabinet
1.1 4 34mm voice coil, Al diaphragm, compression HF.
1.2 $63.5mm voice coil, ferrite woofer
1.3 constant directivity horn, coverage 80° X60°.
1.4 Light weighted but powerful class D power amp with low distortion.
1.5 15mm plywood cabinet with rib inside and black finish on the surface
1.6 45 degree monitoring
KV15A—15″ Two-Way Powered Loudspeaker
1.1 ¢ 34mm voice coil, Al diaphragm, compression HF.
1.2$63.5mm voice coil, ferrite woofer.
1.3 constant directivity horn, coverage 80° X60°.
1.4 Light weighted but powerful class D power amp with low distortion.
1.5 15mm plywood cabinet with rib inside and black finish on the surface
1.6 45 degree monitoring
KV18SA-—-18″ Powered Subwoofer
1.1 18″ high power woofer with extra low bass extension
1.2 35H-150Hz frequency response
1.3 700W Class D power amp with sufficient headroom.
1.4 XLR input. HF output, filtering the frequency below 120Hz; used with full
range speaker cabinet for reinforcement;
1.5 15mm plywood cabinet with rib inside and black finish on the surface
Passive speaker cabinet: NdFeB magnet LF unit; symmetrical magnet design;
heat-resistant voice coil to endure the high temperature at high power.
Compression HF unit; PEEK diaphragm offers excellent frequency response.
15mm plywood cabinet with ribs diminishes resonance; durable black painting;
KV12—12″ Two-Way Passive Loudspeaker
1.1 44mm voice coil, PEEK diaphragm, compression HF.
1.2$75.8mm voice coil, NdFeB woofer
1.3 constant directivity horn, coverage 80° X60°.
1.4 LC crossover with refined components to reproduce the original sound.
1.5 15mm plywood cabinet with rib inside and black finish on the surface
1.6 45 degree monitoring
KV15—15″ Two-Way Passive Loudspeaker
1.1 ¢ 44mm voice coil, PEEK diaphragm, compression HF.
1.2¢75.8mm voice coil. NdFeB woofer
1.3 constant directivity horn, coverage 80° X60°.
1.4 LC crossover with refined components to reproduce the original sound.
1.5 15mm plywood cabinet with rib inside and black finish on the surface
1.6 45 degree monitoring
KV188—18″Passive Subwoofer
1.1 18″ high power woofer with extra low bass extension
1.2 35H-150Hz frequency response
1.3 15mm plywood cabinet with rib inside and black finish on the surface
The rear panel of Passive speaker cabinet as below
The rear panel of Active speaker cabinet as below
|
---|---
Model| KV12
---|---
Type| 12inch two ways
Frequence response| 55Hz – 20kHz (-10dB)
60Hz – 18kHz (-3dB)
Sensitivity (1m1w)| 95 dB
Impedance| 40
rated power| Continue 400W, Progam 800W, Peak 1600W
Crossover| 2.2kHz
Woofer| 12″ woofer/ 4)75.8mm voice coil
Tweeter| compression driver / 4) 44mmmm voice coil
Cossover angle(HxV)| 80° x60°
Max SPL| 132dB
Mains connections| 2xspeakon N14
Dimension(WxHxD)| 365x608x341(mm)
Weight(net/shopping)| 18.2kg / 21.2kg
Model| KV15
---|---
Type| 15inch two ways
Frequence response| 45Hz – 20kHz (-10dB)
55Hz – 18kHz (-3dB)
Sensitivity (1m1w)| 96 dB
Impedance| 40
rated power| Continue 400W, Progam 800W, Peak 1600W
Crossover| 2kHz
Woofer| 15″ woofer / 4)75.8mm voice coil
Tweeter| compression driver / (I) 44mmmm voice coil
Cossover angle(HxV)| 80° x60°
Max SPL| 134dB
Mains connections| 2xspeakon N14
Dimension(WxHxD)| 430x704x400(mm)
Weight(net/shopping)| 22.2kg / 26.2kg
Model| KV18S
---|---
Type| 18inch sub
Frequence response| 35Hz – 200Hz (-10dB)
45Hz – 150Hz (-3dB)
Sensitivity (1m1w)| 96 dB
Impedance| 4 Q
Rated power| Continue 400W, Progam 800W, Peak 1600W
Crossover|
Woofer| 18″ subwoofer
Tweeter|
Cossover angle(HxV)|
Max SPL| 134dB
Connections| 2xspeakon N14
Dimension(VVxHxD)| 530x681x610(mm)
Weight(net/shopping)| 31.9kg / 38.7kg
Model| KV12A
---|---
type| 12inch two way
frequence response| 55Hz – 20kHz (-10dB)
60Hz – 18kHz (-3dB)
Power Handing| 1000W
crossover| 1.7kHz
woofer| 12″ woofer/ (1)63.5mm voice coil
tweeter| compression driver / 4) 34mmmm voice coil
Cossover angle(HxV)| 80° x60°
Max SPL (peek)| 133dB
Connections| Balanced XLR, JACK and RCA Phono
Dimension(WxHxD)| 365x608x341(mm)
Weight(net/shopping)| 19.14kg / 22.28kg
Model| KV15A
---|---
type| 15inch two way
frequence response| 45Hz – 20kHz (-10dB)
55Hz – 18kHz (-3dB)
Power Handing| 1000W
crossover| 1.5kHz
woofer| 15″ woofer / (I) 63.5mm voice coil
tweeter| compression driver / 434mmmm voice coil
Cossover angle(HxV)| 80° x60°
Max SPL| 134dB
Connections| Balanced XLR, JACK and RCA Phono
Dimension(WxHxD)| 430x704x400(mm)
Weight(net/shopping)| 22.76kg / 27.48kg
Model| KV18SA
---|---
type| 18inch subwoofer
frequence response| 35Hz – 150Hz (-10dB)
45Hz – 100Hz (-3dB)
Power Handing| 700W
crossover|
woofer| 18″ subwoofer
tweeter|
Cossover angle(HxV)|
Max SPL| 134dB
Mains connections| Balanced XLR
Dimension(WxHxD)| 530x681x610 (mm)
Weight(netishopping)| 35.9kg / 42.9kg
SOUNDKING AUDIO
WWW.SOUNDKING.COM
All rights resarved to SOUNDKING. No part of this manual may be reproduced,
translated o
photocopied by any means for any purpose, without the written permission of
SOUNDKING,
The information involved in this manual is subject to change without notics.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>