STATUS ST-1002 Between Pro True Wireless Earphones User Guide
- June 15, 2024
- Status
Table of Contents
BETWEEN PRO
USER GUIDE
You made an excellent choice.
ST-1002 Between Pro True Wireless Earphones
Your Between Pro Earbuds
- Contain a 10mm Dynamic Driver + 2x Balanced Armature Drivers (in each earbud)
- Offer market-leading battery life (12hrs in the buds, another 36hrs in the case)
- Contain 4 microphones (2 in each earbud) for stellar wireless call quality
- Connect via Bluetooth 5.2. to virtually every modern phone, tablet, computer, and television
- Are backed by Status Audio’s 30 day performance guarantee + 1 year warranty
Charge
The Between Pro arrive with some juice, but we highly recommend you charge to 100% before initial use. First, place the earbuds in the charging case and shut it. On the backside of the charging case, there is a USB-C input. Using the provided cable, insert one end into the case, and the other end into a power source (wall charger, computer, USB input, etc).
Please use the USB-C cable we provided.
Why? Not all USB-C cables will work with the Between Pro Earbuds. There are
different charging standards that are outside of our control. If you need to
use a third party charger, it should originate in a USB-A connection.
Look at the LED lights on the front of the case. You’ll see a blinking light
during charging.
Charging is finished when all 3 LED lights illuminate a solid blue color.
Operate
Open the case and remove the earbuds.
This will automatically put the buds in “pairing” mode, which means they are
ready to connect to your device!
You’ll also see a flashing red + blue light on the top of the earbuds.
If you have already put the earbuds in your ears, no problem!
You’ll be greeted with voice updates along the way – “power on”, battery
status (low, medium, high), and Bluetooth connection status.
Now go to the Bluetooth Menu on your device.
The image to the right shows a smartphone, but you can connect the Between Pro
with any Bluetooth-enabled device: smartphones, tablets, computers,
televisions, and more.
“Between Pro” should be listed in your Bluetooth menu. If it isn’t, just give
it 5-10 seconds to appear. Still nothing? Turn Bluetooth off on your device,
and then switch it back on.
More on Bluetooth Pairing
Bluetooth pairing can be confusing, and trip up even the most seasoned technophiles. So don’t get frustrated, we will work through this together.
First thing to know:
Once you successfully pair the Between Pro to a given device (say your
smartphone or computer), it will remember this device FOREVER. It will
automatically pair to this device when you open the Between Pro charging case
(provided the device is turned on and in-range).
Are you still having problems?
Pairing procedures can vary depending on your device. So if you are attempting
to pair the Between Pro to (for example) a Samsung Galaxy S20 – you should
Google something like: “Bluetooth pairing Samsung Galaxy S20”.
Still having problems? Email us at
[email protected]
Getting the right fit
The Between Pro are designed to fit snuggly in your ears. They should achieve an airtight seal, and stay in your ears even during high-intensity movement.
This is how they should look:
We include 3 different silicon “fit-wings”:
Size 1 comes pre-installed on the earbuds. If the fit is not secure enough, size up.
Controlling the Between Pro
Music & Listening:
| Function | Left Button | Right Button |
|---|---|---|
| Play | Short tap (either side is OK) | |
| Pause | Short tap (either side is OK) | |
| Volume + | Double-tap | |
| Volume – | Double-tap | |
| Previous Track | Press & hold | |
| Next Track | Press & hold | |
| Voice Assistant | Triple-tap (either side is OK) |
| Function | Left Button | Right Button |
|---|---|---|
| Answer call | Short press (either side is OK) | |
| Reject call | Press & hold (either side is OK) | |
| End call | Short press (either side is OK) | |
| Switch between earbuds & device | Press & hold (either side is OK) |
Controlling the Between Pro (cont’d)
Powering on and off:
Removing the buds from the case automatically turns them on.
Putting the buds back in the case automatically turns them off.
Manual Power On/Off + Reset
To manually power on and off the earbuds, hold both left and right buttons
simultaneously.
To perform a full reset, hold the button on the backside of the charging case for 6 seconds while the case is open. The LED lights on the earbuds will flash purple when the reset is complete.
Safety Information
Warning!
Continued exposure to loud noise (more than 85 decibels)(85 dBA) may cause
gradual but permanent damage to hearing.
Always turn the level of your source down to a low level before placing the
headphones on your ears. Gradually turn up volume until you achieve a
comfortable level. Never listen at high volumes for long periods.
Do not tamper or disassemble the headphones, as doing so will void the
warranty. Besides removable ear-pads, there are no user-serviceable parts
inside.
Be aware of your surroundings. Do not use headphones when it is unsafe to do
so, for example when operating a vehicle, crossing the street, or any activity
requiring you to pay attention to your surroundings.
For more information about safe listening and hearing health, please visit the
Hearing Health Foundation at:
hearinghealthfoundation.org
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
References
- Hearing Health Foundation | Funding Groundbreaking Research for Hearing Loss and Tinnitus
- Status: Elevated audio for everyday listening