ARDESTO SHRR-B8WDR Electric Shaver Instruction Manual

ARDESTO SHRR-B8WDR Electric Shaver

Before operating the device, please read this manual carefully and save it for future reference. Use the device only as described in this instruction manual. Keep the original packaging materials, receipt and warranty card during the warranty period. If it is necessary to transport the device, we recommend packing it in the original box.

SAFETY WARNING

READ CAREFULLY AND STORE FOR FUTURE USE.

• This appliance can be used by children over the age of 8 and people with disabilities or lack of experience or knowledge, if they are under constant supervision or have been instructed in the safe use of the appliance and they understand the possible dangers. Cleaning and customer service should not be performed by children without supervision.
• Children shall not play with the appliance.
• Keep the product and its power cord out of reach of children under 8 years of age.
• The appliance must be powered only from a safe extra-low voltage according to the marking on the appliance.
• The cutting head of this appliance can be washed under a water tap while holding the shaver in your hand.
• Warning! Always unplug the device before cleaning. Unplug the parts from the power cord before cleaning them in water. The parts of the appliance that need to be mounted or stood upright, must be mounted or stood upright in such a way that they cannot fall into water.

Attention:
Use the device only with the supplied adapter to avoid a dangerous situation.

1. The electric shaver and its adapter can only be used indoors. Do not use the electric shaver outdoors.
2. Do not place the adaptor over sharp objects. Make sure that the cable does not hang over the edge of a table or that it is not touching a heated surface.
3. Ensure that the adaptor is not clamped or crimped.
4. Keep the adaptor dry. Be careful not to get water on the adapter.
5. Do not wind the adaptor around the handle of the appliance.
6. Do not connect and disconnect the adaptor to and from the power source with wet hands.
7. Before connecting the adaptor to a power source check that the voltage on its rating label corresponds to the voltage in the power socket to which you wish to connect it.
8. Do not use the electric shaver or the adapter if it is damaged.
9. If the device falls into water while charging, do not touch it and disconnect the adapter from the power source immediately. Contact an authorized service center to check the device.

• Do not use or store the device at temperatures below 10 °C and above 40 °C.
• Electrolyte leaking from a battery can be caused by overloading the appliance or using it in extremely high temperatures. If battery fluid gets on the skin or eyes, the affected area should be washed immediately with water. Seek medical attention.
• The appliance is equipped with a built-in battery that can only be removed at a professional service center. Never attempt to remove it from the appliance yourself.

Attention!
Never disassemble the appliance to remove the battery. Never throw it into a fire. Incorrect use, risks releasing toxic substances or causing a fire or explosion.

Safety during use:

1. This device belongs to personal hygiene items, so it should not be used by other people.

2. This electric shaver is intended for home use only and is designed for shaving and trimming beards or whiskers and facial hair. The electric shaver is not intended for commercial purposes or for trimming animal fur.

3. Do not immerse the device in water or any other liquid.

4. Do not leave the device switched on unattended.

5. When connected to the mains, do not use or store the electric shaver in areas where it may fall into the water or be exposed to water jets/splashes.

6. We do not recommend using the electric shaver on parts of the face where there are open wounds or lacerations, burns, blisters, etc.

7. Use only the original accessories supplied with this electric shaver.

8. Do not use the electric shaver in rooms where aerosol sprayers are used or where oxygen is released.

9. Do not expose the electric shaver to the outdoor environment, extreme temperatures, direct sunlight, excessive humidity, or excessively dusty environments.

10. Do not place the electric shaver near heaters, open fires, or other sources of heat.
    Warning: Keep the electric shaver dry.

11. The electric shaver may heat up during use or when it is being charged. This is completely normal. Always turn off the electric shaver and disconnect it from the power socket when not using it, when leaving it without supervision, before cleaning, maintenance, or storage. Store the electric shaver and its adaptor in a dry environment.

12. Keep the electric shaver clean. Do not perform any maintenance on the electric shaver other than cleaning the individual components as described in chapter Cleaning and Maintenance.

13. Do not bend or apply pressure to the blade net guard. Before using the shaver, make sure that the blade net is not damaged. Do not use the shaver if the blade net guard is damaged.

14. Do not use the electric shaver if it has been dropped on the floor or in water if it is not working properly or if it is damaged in any way. Contact an authorized service center. Do not attempt to repair the device yourself as this may void the warranty.

15. If the device has been stored or transported at low temperatures, keep the device at room temperature for 2 hours before use.

16. Check regularly, if the blades are not damaged or deformed.

17. If it is necessary to use an extension cord, it must be undamaged and meet current standards.

18. For additional protection, we recommend the installation of current protection (RCD) with the nominal release current not exceeding 30 mA. Ask a control technician or an electrician for advice.

19. Do not exceed the maximum continuous operation time of 30 minutes.

20. If the shaving part of the device is blocked, it is necessary to switch off the device immediately and eliminate the cause.

EQUIPMENT

• Electric shaver – 1 pc
• Protective cover – 1 pc
• USB Type-C cable – 1 pc
• Adaptor – 1 pc
• Cleaning brush – 1 pc
• Instruction manual (contains warranty card) – 1 pc

PRODUCT OVERVIEW

1. Rotary shaver heads
2. Power switch
3. LED display
4. Charging port

PURPOSE OF USE

• The electric shaver is intended for dry and wet shaving of beards and trimming of sideburns, mustaches, or facial hair. Dry shaving is recommended for best results. The electric shaver is not intended for cutting synthetic hair or animal fur.
• The shaver is designed for household use and is not intended for commercial or other professional use.

CHARGING

• The electric shaver has a built-in battery that enables its cordless operation. Before first use or after not using it for a long time, first allow the electric shaver battery to fully charge.
• When the battery is low or fully charged, the corresponding symbol will appear on the display.
• If the battery is low, a red lightning symbol will flash on the display, indicating that the shaver needs to be charged.
• The electric shaver can be charged in two ways:
  • using an external device with a USB port (e.g. computer, USB hub, power bank, etc.).
  • using a standard USB adapter connected to a power socket.
• Note: The selected power source must have an output of 5V DC.
• Insert the smaller USB connector into the socket at the bottom of the device and the larger connector into the selected power source. The battery will start charging when connected to an electrical power source. The display will show a charging indicator in the form of a white color lightning bolt.
• The charging time differs depending on the current battery power level. If the battery is completely discharged (flat), the charge may take up to 3.5 hours. When the battery is fully charged, the display will show FULL.
• A fully charged battery will provide up to 180 minutes of cordless operation.

DIRECT DRIVE TECHNOLOGY

If the battery of the electric shaver is discharged (flat) or if it is discharged during cordless operation, the shaver can be plugged into mains power and can continue to be used. This is enabled by DIRECT DRIVE technology used on the electric shaver. Therefore, no need to wait for a minimum charge. Using the shaver connected to the mains is possible only with an adapter connection.

RECOMMENDATIONS FOR EXTENDING THE LIFETIME OF THE BATTERY

• For the built-in battery to serve you as long as possible, charge, use, and store the electric shaver in a dry environment at an ambient temperature of 15-35°C. Lower or higher temperatures hurt the lifespan of the battery.
• Do not wait for the battery to become completely flat. It is better to charge the battery before it is completely flat.
• When the electric shaver is not used for an extended period, charge it at least once every 6 months.

OPERATION/SHAVING

1. Turn on the electric shaver by pressing the power switch.

2. Holed the electric shaver at a right angle to the skin surface and in short circular motions glide the shaving head over the skin on the face, moving against the growth direction of facial hair. Apply appropriate pressure to the skin. Do not push too hard.

3. While shaving, use your free hand to stretch the skin in hard-to-reach places, such as on the chin. In this way you will achieve better shaving results.
   Note: It may take your skin and facial hair two to three weeks to become accustomed to the new way of shaving. During this period, we recommend using the electric shaver every day.

4. When you have finished shaving, clean the electric shaver according to the instructions in chapter Cleaning and Maintenance.

LOW BATTERY POWER INDICATION
When the remaining time shown on the display reaches 5% or less, the battery level indicator will start flashing on the display.

SHAVING HEAD CLEANING INDICATOR
The shaver is equipped with a timer that adds up the operating time of the shaver (shaving time). When it reaches 10 minutes, the water tap symbol will light up to remind that it is necessary to clean the shaving head. If this happens, clean the shaver as soon as possible according to chapter CLEANING THE SHAVING HEAD. The next time you turn on the shaver, the timer will restart.

STAND-BY MODE
After turning off the electric shaver, the display turns off, and the shaver goes into standby mode. To bring the shaver out of standby mode, simply take it.

LOCK FUNCTION

• The travel lock prevents the electric shaver from being turned on accidentally, e.g. while traveling.
• To turn on the lock function, press and hold the power button for three seconds, to turn off the lock function, press and hold the power button again for three seconds. The lock symbol will flash a few times.

CLEANING AND MAINTENANCE

• For hygiene reasons, clean the electric shaver after every use. Regular cleaning is also important to ensure the correct operation of the electric shaver and to extend the lifespan of the cutters.
• Turn off the electric shaver before cleaning it. Never clean the electric shaver when it is charging and connected to the power supply.
• For cleaning, do not use brushes with hard bristles, cleaning products with an abrasive effect, solvents, etc. Otherwise, the cleaned surface may be damaged.

CLEANING THE ELECTRIC SHAVER AND ADAPTER
The electric shaver unit can be cleaned using a clean dry cloth. In the event that it is very dirty, you can use a lightly dampened cloth. Then thoroughly wipe the cleaned surface dry. To clean the power cable and adapter, use a clean, dry cloth.

CLEANING THE SHAVING HEAD

Cleaning with the brush
Switch off the shaver, remove the blade net cover and clean the shaver with the brush provided. After that, put the cover back.

Cleaning with water

Warning:
Do not immerse the body of the device in water or any other liquid.

• Turn off the shaver, remove the blade net cover and rinse the shaver head under running water. When the shaver is dry, place the cover back. Or, without removing the blade net cover, submerge just the shaver head in water and turn it on, let it run for about 30 seconds. Then turn it off and remove the shaving head from the water.
• Wipe the shaving head with a clean cloth or let it dry naturally. Do not use paper or rough cloths as this may damage the blades.

STORAGE

• When you have finished using it, you can store the electric shaver with all its accessories in a suitable location out of children’s reach. Keep the electric shaver away from extreme temperatures, direct sunlight and excessive humidity. Do not use in an overly dusty environment.
• The manufacturer reserves the right to make changes in the technical characteristics and design of the products that do not impair the operational qualities.

CORRECT DISPOSAL OF THIS PRODUCT

Never dispose of the device with normal household waste. Dispose of the device through an authorized disposal company or an appropriate government agency. Please follow all applicable rules. If in doubt, contact your waste disposal company. Your local community or municipal government can provide information on how to dispose of the product properly. A recyclable lithium battery powers this device. When the device reaches the end of its useful life, remove the battery from the device before disposing of it. Dispose of the battery by local waste disposal requirements. If you have questions about disposal, please contact your local waste disposal agency. The packaging is recyclable. Dispose of the packaging environmentally.

Warranty conditions

The plant guarantees normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual. The service life of the product is 3 years.
To avoid any misunderstanding we kindly ask you to carefully study the Owner’s Manual, and the terms of warranty, and check the correctness of filling out the Warranty Card. The Warranty Card is valid only if the following information is correctly stated: model, serial number of the product, date of sale, clear seals of the company-seller, and signature of the buyer. The model and serial number of the product must correspond to those specified in the Warranty Card.

If these terms are violated, and if the information specified in the Warranty Card is changed, erased, or rewritten, the Warranty Card is considered invalid. Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user and by specialists having the necessary qualifications set by USC or selling companies (on a paid basis). In this case, the person (the institution) installing the appliance shall be responsible for the correctness and quality of installation (setup). Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation and for obtaining a warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card.

In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase. Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made by the law «On Protection of Consumers’ Rights». In the case of warranty repair, the warranty period shall be extended for the period of repair and shipment.

WARRANTY CARD

Dear Buyer!
Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured by the highest quality standards, and we thank you for choosing this particular instrument.

We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

1. Warranty service is carried out only if there is a correctly and filled original warranty card, which indicates: the product model, date of sale, serial number, warranty service period, and the seller’s seal. *
2. The service life of household appliances is 3 years.
3. The product is intended for consumer use. When using the product in commercial activities, the seller/manufacturer does not bear warranty obligations, and after-sales service is performed on a paid basis.
4. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
5. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules outlined in the instruction manual.
6. The product is removed from warranty service in the following cases:
   • misuse and non-consumer use;
   • mechanical damage;
   • damage caused by the ingress of foreign objects, substances, liquids, insects;
   • damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
   • damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
   • when operating equipment in the power supply network with a missing single ground loop;
   • in case of violation of seals installed on the product;
   • lack of serial number of the device, or inability to identify it.
7. The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
8. The warranty period is 12 months from the date of sale.

Tear-off maintenance tickets are provided by an authorized service center.

The completeness of the product is checked. I have read the terms of the warranty service, no complaints.

• Customer Signature ___

Product information

• Product
• Model
• Serial number
• Seller Information
• Trade organization name
• The address
• Date of sale
• Seller stamp

Coupon No 3

Seller stamp

• Date of application
• Cause of damage
• Date of completion

Coupon No 2

Seller stamp

• Date of application
• Cause of damage
• Date of completion

Coupon No 1

Seller stamp

• Date of application
• Cause of damage
• Date of completion

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>