Eco-1 Dolphin Robotic Pool Cleaner User Guide

Eco-1 Dolphin Robotic Pool Cleaner

Quick start guide

Dolphin
Thank you for purchasing a Medtronic’s Robotic Pool Cleaner.
The Robotic Pool Cleaners by Medtronic’s deliver advanced cleaning technology’s, long lasting performance and easy maintenance. You and your family will be free to enjoy swimming with full confidence that your pool is completely clean.

Cautions & Warnings

• Use the originally supplied power supply only.
• Do not use an extension cable in any case whatsoever.
• Ensure the electrical outlet is protected by a ground fault interrupter (G Fl) or an earth leakage interrupter.
• Keep the power supply out of standing water
• . Do not enter the pool while the Pool Cleaner is working.
• Unplug the power supply before servicing.
• Do not pull the Pool cleaner from the pool using the cable.
• Use the Pool Cleaner in the following water conditions only: Chlorine Max 4 ppm; pH 7.0 – 7.8; Temperature 6 -34°C (43-93°F); NaCl Maximum = 5000 ppm.

Specifications

• Motor protection : IP 68
• Minimum depth : 0.80m/2.6ft
• Maximum depth : 5m/16.4ft

Helpful hints

• When working, the Power Supply should be placed in the shade.
•  If the Dolphin is fitted with combined or wonder brushes, gently aqueeze the brushes until they are soaked with water.
• Release minimal required floating cable length to ensure proper pool coverage. Leave excess cable rolled outside the pool.• After each cleaning cycle wash the filter bag or cartridge. Clogged filter bags reduce scanning and cleaning efficiency.
• Once a week unplug the cable from the power supply, unwind the tangled portions of the cable, straighten it out and leave it in the sun for several houres.
•  Store the pool cleaner in a shady place on its Caddy, if not on a caddy, place the pool cleaner upside down.

Robot operation

Position the power supply at least 3m 110ft away from the edge of the pool.

Operation Out of the pool

• The robot will now begin working for a complete cleaning cycle.
• At the end of the cycle, it will automatically switch itself off.

Cleaning the filter

Periodical maintenance ,

Unplug the power supply before servicing

• Dismantle the impeller cover and clean around the impeller housing, then reassemble.
• Place the impeller cover at an angle so that the notch is on the second ring of the spring

Storage

Coil the cable and store in a cool, dry place on the Caddy. Do NOT store the robot where it will be exposed to direct sunlight, excessive heat or to frost.

Remote Control

Menu screen

Digital power supply

•  Input – 100-250 AC Volts
• 50-60 Hertz
• 180Watt
•  Output – <30 VDC
•  IP 54

Full filter indicator

• The power supply is equipped with a unique filter status indicator.
• The red LED indicates 2 filter conditions
• When blinking- The filter is partially blocked
• When lighted – The filter is blocked and must be emptied and cleaned If the LED does not shut-off after the filter has been emptied and cleaned, press the RESET button while the robot is working

Weekly Timer
When the power supply is switched on, the 3 LEDs will blink for 5 seconds. At this time by pressing the SELECT button you may choose a pool cleaning schedule for the coming week.

Note! – The robot will always begin to work upon set-up.

1. LED 1 – The robot will automatically work every day for a full cycle= 7 times a week.
2. LED 2 – The robot will automatically work every other day for a full cycle = 3 times a week.
3. LED 3 – The robot will automatically work every 3 days = 2 times a week.

If you do not press any of the buttons in the first 5 seconds after the power supply has been switched on the robot will work for one cycle only.

• While the robot is working in weekly timer mode the LED will blink constantly between cycles.
• At the end of the week the power supply automatically switches off. You must reschedule the robot.
• For a detailed manual (including videos): manuals.maytronics.com/
• For online product warranty registration: registration.maytronics.com
• For a detailed manual (including videos): manuals.maytronics.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>