HAOHUALIANHE A702 Remote Control Instructions
- June 15, 2024
- HAOHUALIANHE
Table of Contents
HAOHUALIANHE A702 Remote Control Instructions
Product Information
Specifications
- Type : Type-C
- Maximum Bearing Capacity : 500g
- Working Voltage : 3.6~4.2V
- Main Material : ABS plastic
- Support System : Android, iOS, HarmonyOS
- Remote Control Battery Capacity: 240mAh
- Maximum Stretching Distance: 86mm
- Standby Time of Remote Control: 360 days
Main Functions
The main function of this product is to enable remote control shooting for
mobile phones and tablets.
Charging
To charge the device, locate the charging port and connect the appropriate
charging cable. Ensure that the indicator light is on during charging. Once
fully charged, the indicator light will turn off.
Operating Instructions
- Toggle the switch on the side of the remote control to turn it on/off. The remote control indicator light will flash automatically when turned on.
- Open the Bluetooth settings on your cell phone or tablet and enable Bluetooth.
- Search for “ADYSS” in the Bluetooth devices list and click on the device name to pair.
- Once connected, the indicator light will stop blinking, indicating a successful connection.
- Use the shooting key on the remote control to control the camera functions of your cell phone or tablet.
Software Function Description
This product supports various photo software on your cell phone or tablet,
including the camera and beauty face camera, when connected via Bluetooth.
FAQ
- Q: What is the maximum bearing capacity of this product?
- A: The maximum bearing capacity is 500g.
- Q: What is the standby time of the remote control?
- A: The standby time of the remote control is 360 days.
- Q: Which systems does this product support?
- A: This product supports Android, iOS, and HarmonyOS.
Product specification
- Main Functions: Mobile Phone/Tablet Remote Control Shooting
- Maximum bearing capacity: 500g
- Main material: ABS plastic
- Operating temperature: -10°~40
- Working voltage:3.6~4.2V
- Support system: Android, IOS, HarmonyOS
- Remote control battery capacity: 240rnAh
- Maximum stretching distance: 86mm
- Standby time of remote control: 360day
Operating instructions
- Toggle the switch on the side of the remote control (on/off), the remote control indicator light will flash automatically.
- Open the cell phone “Settings”-“Bluetooth” to open the Bluetooth, search for “ADYSS”, click on the device name to pair. When “Connected” is displayed andthe indicator light stops blinking, the connection is successful (remote control is on).
Shooting key:
support cell phone camera/beauty face camera and other photo software (connect
to Bluetooth and use).
Software function description
- When the side switch is turned on, the blue light flashes continuously for standby connection; the blue light goes out after connection. The blue light flashes once every time the button is pressed when there is operation, and the blue light is always on when the button is pressed for a long time.
- Connect the Bluetooth after power on, no operation, disconnect the Bluetooth connection after 10 minutes, and automatically enter the low-power hibernation, when there is a key to press, the blue light will be on. After 10 minutes of disconnecting Bluetooth connection, it will automatically enter into low-power hibernation, and when there is a key operation, it will be connected back to normal use automatically.
- Turn off the side switch, Bluetooth disconnect, re-open the side switch, and Bluetooth automatically back to normal use. When you turn off the side switch, Bluetooth will be disconnected.
- When you turn on the side switch, the blue light will blink and wait for connection, and it will automatically enter the After 10 minutes of no operation, it will automatically enter into low-power hibernation, and the blue light will go out.
- Standby power consumption ≤10UA.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF waming for Portable device:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
MADE IN CHINA