SHENZHEN HAOHUALIANHE TECHNOLOGY CO LTD A19 Remote Control User Manual
- June 1, 2024
- SHENZHEN HAOHUALIANHE TECHNOLOGY CO LTD
Table of Contents
SHENZHEN HAOHUALIANHE TECHNOLOGY CO LTD A19 Remote Control
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- Conditions: Must not cause harmful interference, must accept any received interference
- Approval: Changes or modifications not approved may void the user’s authority
Product Usage Instructions
Installation
- Ensure the device is placed in a well-ventilated area.
- Connect the device to a power source using the provided cable.
- Power on the device.
Operation
- Familiarize yourself with the device’s functions using the user manual.
- Follow the specific instructions for the desired operation mode.
Maintenance
- Regularly clean the device with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or humidity.
- Keep the device away from water or liquids.
Troubleshooting
If you experience any issues with the device, refer to the user manual for troubleshooting steps. Contact customer support if problems persist.
Frequently Asked Questions (FAQ)
Q: What should I do if the device stops working suddenly?
A: Check the power source and connections. If the issue persists, contact
customer support for further assistance.
Q: Can I modify the device for enhanced performance?
A: No, any changes or modifications not approved may void your authority to
operate the equipment.
Product Specification
- Main Functions: Remote Control Shooting
- Applicable system: 10S/Android/ HarmonyOS
- Bluetooth name: AOYSS
- Transmission frequency:
- Bluetooth protocol: Bluetooth 4.0 HID
- Weight: Sg
- Size: 44″25″ mm
- Standby time: 30 days
- Remote control distance: 10 meters
Operating Instructions
- Long press the power on button for two seconds to turn on the device.
- Wait for the blue light to come on blinking.
- Open the phone settings and search for connected devices.
- Click” AOYSS” to connect the device wait S seconds, the blue light is always on pairing successfully pairing to turn on the camera can be turned on to take pictures and video.
Supported cell phone models
- Apple series models (10S 5.0 or above)
- Android series models (Android 4.2.2 or above) Please update your phone system on time to avoid low version incompatibility.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used by the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meel general RF exposure requirements. The
device can be used in porlable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>