Shenzhen Haohualianhe Technology BRC-1 Multi Function Bracket User Guide
- June 6, 2024
- Shenzhen Haohualianhe Technology
Table of Contents
Shenzhen Haohualianhe Technology BRC-1 Multi Function Bracket
Connection steps
- Press and hold the power button” M “for 2 seconds to turn on the device.
- Wait until the blue light is on
- Open phone settings, search for link devices
- Click •ADYss• to connect the device and wait for 5 seconds. The blue light is brightly paired successfully.
Supported mobile phone model
-
Apple series models (iOS 5.0 and above) * Android series models (Android4.2.2 and above)
-
Please update your phone system on time to avoid the version being too low to be compatible for use.
Matters need attention (not involved in the warranty) -
Before using the selfie stick, please make sure that the phone is properly fixed on the collet, and the damage caused by the smartphone falling off.
-
Please confirm the place of using region and facility restrictions before using. and prohibit the behavior of public property violations.
-
Pulling and rotating the power cord during using period which causes a short circuit.
-
Falling from a high place causes damage to the outer casing.
-
Using a power supply that exceeds the product load that causes the product to heat up and the circuit board to burn out.
-
Do not place the product In a low-temperature and humid place.
-
Do not throw the product into the fire and keep away from the fire.
-
Warning: Contains small parts. Not suitable for children 3 years old and below.
One Year Limited Warranty Summary
ADYSS warranted that the delivered hardware product to be free from defects in materials and workmanship for a period of one year from the original retail purchase date, and the after-sales problem can be accepted. ADYSS would guarantee neither the normal use of wear nor the damage caused by accident or abuse. Visit a retail store owned by ADYSS or ADYSS Authorized Service Providers for the service, where you can have the product repaired accordingly. Replacing your warranty rights is not included in the additional rights provided by local consumer law. When you make a claim according to this warranty policy, you may need to provide detailed information of proof of purchase.
Federal Communications Commission
FCC ID: 2ARFLBRC-1 This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Any
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.