RADION Aquarium LED Light Mobius Controlled User Guide

RADION Aquarium LED Light Mobius Controlled

SETUP

1. Mount Radian 8-10″ above the water using your preferred mounting accessory. (sold separately)

2. Assemble power supply, attach Radian power cable and plug into outlet.

3. Download the Mobius app from your app store. (iOS or Android)

4. Open Mobius, login/create account and add light. Additional Mobius Information: http://www.mobius.app

OPERATIONAL INFO

IMPORTANT: Ensure the Radian is securely fastened and will not fall or get wet. Mounting the Radian XR30 or XR15 less than 8 inches above the water may expose the fixture to excessive moisture or contact with water. Water damage is not covered under warranty. The Radian has an internal fan to disperse heat.

• For optimum performance, do not operate the Radian in a completely enclosed hood.

• For more Radian FAQs: support.ecotechmarine.com/radion 
• NEVER power on or set a powered on Radian directly on a surface. This may cause damage to the Radian and/or become a fire hazard
• NEVER look directly at the illuminated LED cluster.
• Over exposure to high intensity lighting may cause damage to livestock particularly inverts and coral. Intentionally under lighting your aquarium and utilizing the acclimation feature in Mobius to gradually increase intensity is advisable.

BASIC OPERATION

Your Radian operates in Basic Mode out of the box. In Basic mode, the Radian will remain on unless manually powered off. Current settings will remain even after powering off.

BASIC MODE CONTROLS

• Cycle through the Radian’s different preset color settings PRESS “Cycle” button
• Increase light intensity by 1% PRESS “Raise” button
• Decrease light intensity by 1% PRESS “Lower” button
• Increase light intensity rapidly HOLD “Raise” button
• Decrease light intensity rapidly HOLD “Lower” button

MANUAL OVERRIDE CONTROLS

• One-Day Power On-Off
  Once your light has been programmed, this will initiate a one-day power off. This is to help newly introduced fish acclimate. The Radian will turn back on when the next day cycle begins.

HOLD all three buttons.

• Override – Day
  When in night mode, this button combination will toggle day mode. Your Radian will stay in day mode until the override period has elapsed, or until you press the button combo again to return to night mode

HOLD ‘Cycle” and ‘Raise’ buttons.

• Override – Night
  When in day mode, this button combination will toggle night mode. Your Radian will stay in night mode until the override period has elapsed, or until you press the button combo again to return to day mode.

HOLD ‘Cycle’ and ‘Lower’ buttons.

SUPPORT

EcoTech Marine provides customer support worldwide. In the United States customer service is located in Bethlehem PA. US service responses can be expected from 9am-5pm eastern standard time but feel free to contact us by email or through our website at any time. International service is provided by EcoTech’s international distributors. Please visit the following web link to find your local distributor.
https://ecotechmarine.com/retailers

• Online: ecotechmarine.com/support
• Phvone: 1-800-785-0338

TROUBLESHOOTING

Below are some common troubleshooting situations and their most common solutions. If you have issues that you cannot solve, please contact EcoTech Marine Customer Service.

Radian does not power on.

• Check that the power supply plugs are properly connected.
• Check outlet plug is secure and t hat the outlet has power.

Radian fails to be located by Mobius app

• Check that Bluetooth + location services are enabled on your
  smart device.*

• Close and re-start the Mobius app.

• Check that the Radian is powered on.*

• Power off Radian, wait 15 seconds then power back on.*

• Restart Smartphone or Tablet.

• It is advisable to close out of end r&-0pen the Mobius epp

FACTORY RESET

G5 Radians have the ability to be factory reset via their buttons.
To do so, please follow the steps below:

1. Press and hold the center button until all buttons flash red, white and blue then release.

2. Press and hold all 3 buttons until t he buttons flash red and purple then release.

3. Press and hold the outer 2 buttons until the Radian resets

SAFETY STATEMENTS

Incorrect usage of this device could cause bodily injury or death. Follow all safety guidelines when assembling and using this fixture.
Always read the manual prior to use.

WARNING

• DO NOT immerse the product or power supply in water. if the product or power supply fals into the water, DO NOT reach for it!
• First unplug it and then retrieve it. If electrical components of the appliance get wet, unplug the appliance immediately.
• Death, injury, or destruction of property may result.

WARNING_
Do not use appliance for other than intended use. Ihe use of attachments, power cords, or accessories not sold by the manufacturer
may cause an unsafe condition resulting in death, injury, or destruction of property may result.
To avoid possible electrical shock, special care should be taken since water is employed in the use of aquarium equipment.

• If a plug or receptacle becomes wet, immediately disconnect the fuse or circuit breaker.
• Do not operate any product if it has a damaged cord or plug, if it is malfunctioning or if it is dropped or damaged in any manner.
• Carefully examine the product after installation. It should not be plugged in if there is water on parts not intended to be wet
• Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect.
• Position the aquarium stand and tank to one SIde of a wall-mounted receptacle to prevent water from dripping onto the receptacle or plug. A “drip-loop should be employed tor each cord connecting an aquarium appliance to a receptacle. A drip-loop is the part of the cord below the evel of the receptacle (or the connector if an extension cord), to prevent water from traveling along the cord and coming in contact with the receptacle.
• If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.
• DO NOT attempt repairs yourself; return the appliance to the manufacturer for service or discard.
• Close supervision is necessary when an appliance is used by or near children. Keep out of reach of young children.
• Always unplug prodcut from outlet before putting on or taking oft parts, and before cleaning.

REGULATORY STATEMENTS
FCC Compliance Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interterence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interterence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio r television reception, which can be determined by turning the equipment off and on, the user is encOuraged to try to correct the interterence by one or more of the following measures

• Reorient or reldcate the receiving antenna. Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit ditterent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ IV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this
equipment His device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. I his device and its
   antenna must not be located or operating in conjunction with any other antenna or transmitter. The device has been evaluated to meet
   general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Industry Canada Compliance Statement

• This device complies with Industry Canada license-exempt RSS standard(s).
• Operation is subject to the following two conditions:
  1. This device may not cause interference,
  2. This device must accept any interference, including interference that may cause undesired operation of the device.
• Ihe device has been evaluated to meet general RF exposure requirement. Ihe device can be used in portable exposure condition Without restriction.

PRODUCT REGISTRATION

PLEASE DO NOT DISREGARD Ecotech Marine WARRANTY REGISTRATION
IMPORTANT: Registration of this Ecotech Marine product must be completed within thirty (30) days from the date of purchase for the one (1) year Warranty Period to become effective. Otherwise, the Warranty Period for this Ecotech Marine product is thirty (30) days.

REGISTRATION:

• Your product can be registered in any of the following ways: Website: To register online, visit http://www.ecotechmarine.com/ Choose the Support link at the top of the page. Ihen, select the ‘warranty Registration ink to register your product.
• Some states do not allow the exclusion or limitation of incidental or consequential damages, So the above exclusions may not apply to you.
• Ecotech Marine’s warranty is governed by the laws of the State of Pennsylvania, excluding its conflict of laws principles and excluding the provisions of the United Nations Convention on Contracts for the International Sale of Goods. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

TECHNICAL SUPPORT:
This limited warranty is neither a service nor a support contract. Information about Ecotech Marines’s Current support offerings and policies can be found at http://support.ecotechmarine.com.

LIMITED VWARRANTY

• Ecotech Marine warrants to the original purchaser only that the Ecotech Marine Product will be free trom defects in material and workmanship under normal use for a period of thirty (30) days from the date of purchase of either one (i) year from the date of purchase – if the product is properly registered through the registration process below provIded that the product is installed and used properly and consistent with the product manual. No representation or warranty by any Ecotech Marine salesperson, dealer, agent representative, employee, or any other individual or entity acting or purporting to act on benalf of Ecotech Marine, shall be binding upon Ecotech Marine other than as expressly set forth herein. Ihis limited warranty applies only to the original purchaser and IS not transterable from the original consumer purchaser. In the event of a limited warranty claim, proof of purchase will be required.Ecotech Marine’s warranty shall not apply: (i) to any damaged Ecotech Marine Product that has been subjected to accident, misuse, neglect, alteration, acts of God, improper handling, improper transport, improper storage, improper use or application, improper installation, improper testing or unauthorized repair, operation outside recommended parameters (as described in the applicable product manual, for example, damage from saltwater spray or heat), power fluctuation or failure, subjection to abnormal physical or electrical stress, use of incompatible products, non-approved power supplies/connections, or similar circumstances (1) to any Ecotech Marine Product where product been exposed to water or (ii) to cosmetic problems or defects that result from normal wear and tear under ordinary use, and do not affect the performance or use of the product. Ecotech Marine’ s warranty applies only to a product that is manufactured by or for ECotech Marine and identified by the Ecotech Marine trade name or product identification logo afftixed to the product. If you notice a problem with your Ecotech Marine Product, do not attempt to repair it yourself. Any attempts at selfrepair shall void thislimited warranty.

• Ecotech Marine shall not be held liable for damage to any aquarium, auarium lite forms, or other personal objects due to improper use, failure, or maltunction of the device. lf the product develops a covered defect within the one-year period, Ecotech Marine will, at its option, either repair or replace the ECotech Marine Product without charge, prOvided that the Ecotech Marine Product is returned during the warranty period.
  NOTE: FOFR THE ONE (1) YEAR WARRANTY TO BECOME EFFECTIVE, THE PRODUCT TO WHICH THIS LIMITED WARRANTY RELATES MUST BE  REGISTERED WITHIN THIRTY (30) DAYS OF PURCHASE. INSTRUCTIONS FOR REGISTRATION ARE INCLUDED BELOw. OBTAINING WARRANTY SERVICE:
  lf the product If this product proves defective during the Warranty Period, contact Ecotech Marine Support (at the address isted below) for instructions on how to obtain warranty service
  Street Address: Ecotech Marine 2675 Commerce Center Blvd, Suite 101, Bethlehem PA 18015 Phone: 610-954-8480

• Online Support System. http://support.ecotecnmarine.com
  Please be prepared with your product model and serial number, as well a proof of purchase. DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED TO PROCESS WARRANTY CLAMS.- REGISTRATION OF YOUR PRODUCT SATISFIES THE PROOF OF PURCHASE REQUIREMENT. f you are requested to return your product to Ecotech Marine, you will be given a Return Materials Authorization (RMA) number. You are responsible tor properly packaging and shipping your product to Ecotech Marine, this includes the cost of shipping and any applicable insurance (both tob and from Ecotech Marine’s factory). Ecotech Marine is not responsible for, and this limited warranty does not cover, damage to products incurred in shipping. Please take efforts to package your product properly. You must include the RMA number and, if the product is not registered a copy of your dated proof of original purchase when returning your product. Products received without an RMA number and, applicable, dated proof of original purchase will be rejected. Do not include any other items with the product that you are returning to Feotech Marine.

• RepairS or replacements not COvered under this limited warranty Will be SuDject to charge at ECotecn Marines then-Current rates.ECotecn Marine DSCLAIMS ALL OTHER WARRANTIES WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, TO THE FULLEST EXTENT ALLOWED BY APPLICABLE LAW. NO IMPLIED WARRANTY OF FTNESS FOR A PARTICULAR PLURPOSE OR MERCHANTABILITY SHALL APPLY EXCEPT AS REQUIRED BY APPLICABLE LAW. ECOTECH MARINE DOES NOT AUTHORIZE ANY PERSON OR BUSINESS ENTITY, INCLUDING ITS AUTHORIZED DEALERS, TO CREATE FOR IT ANY OBLIGATIONS, LIABILITIES, OR OTHER WARRANTIES IN CONNECTION WITH THIS PRODUCT. ALL WARRANTIES ARE VOID IF THERE IS DAMAGE TO THE ECOTECH MARINE PRODUCT THAT IS NOT A RESULT OF A DEFECT IN THE MATERIALS OR WORKMANSHIP. THE SOLE AND EXCLUSIVE REMEDY FOR ALL CLAIMS THAT YOU MAY HAVE ARISING OUT OF OR IN CONNECTION WITH YOUR USE OF THIS PRODUCT, WHETHER MADE OR SUFFERED BY YOU OR ANOTHER PERSON AND WHETHER BASED IN CONTRACT OR TORT, SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT, IN NO EVENT WILL ECOTECH MARINE BE LIABLE TO YOU

• ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY OF TO USE THE PRODUCT (INCLUDING, wITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION OR ANY THER PECUNIARY LOSS, DAMAGE TO YOUR AQUARIUM OR ANY AQUARIUM INHABITANTS), OR FROM ANY BREACH OF WARRANTY, EVEN IF ECOTECH HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL ECOTECHS LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT. IF YOU DISAGREE WITH THESE TERMS AND CONDITIONS DO NOT USE THE ECOTECH PRODUCT.

RF Exposure Statement

• The user is cautioned to maintain a 2Ocm (8 inch) from the product to ensure compliance with RF exposure requirements.
• European Union – Disposal Information. According to local laws and regulations, your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

CE Declaration or tonTormity
The equipment complies with the Radio Equipment Directive 2014/53/EU.
Ihis equipment meets the following conformance standards:

• EN 300 328, EN 301 489-1, EN 301489-17, EN 62479, EN 62311 Original Declaration of Conformity Can Be Obtained From
• http://support.ecotechmarine.com
• Ecotech Marine Radion LED Light
• Part Numbers: XR15G6PRO, XR15G6BLUE, XR30G6PRO, XR30G6BLUE
• Silex P/N: SX-ULPGN-BTZ-200o
• FCC ID: PPQ-WCBN3516A
• IC: 4491A-WCBN3516A
• Model: WCBN3516A

References

• Retailers - EcoTech Marine

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>