superbrightleds com SUPER BRIGHT LEDS LED Ready Hardscape Light User Manual
- June 15, 2024
- superbrightleds com
Table of Contents
superbrightleds com SUPER BRIGHT LEDS LED Ready Hardscape Light
Specifications
- Model: LFB-H08
- Series: LFB-H Series
Important: Read all instructions prior to installation
Safety and Notes
Please read the following safety instructions and notes before installing or using the LED Ready Hardscape Light:
- Read all instructions prior to installation.
- Ensure that the power supply is turned off before installation.
- Do not modify or disassemble the light fixture.
- Avoid direct exposure to water or other liquids.
- Keep the light fixture away from flammable materials.
- Do not install the light fixture near heat sources.
Recommended Accessories
| Part Number | Description |
|---|---|
| WWN-2212 | Silicone-filled wire nut |
| SFT-20 | Self-fusing silicone tape |
| WP14-2DB | 14 gauge landscape wire |
| WP12-2DB | 12 gauge landscape wire |
Installation Instructions
- Remove the lens from the LED Ready Hardscape Light.
- Install a compatible bulb into the light fixture.
- Reinstall the lens onto the light fixture.
- Lay out the fixtures in the desired installation locations.
- Run the landscape wire (WP14-2DB or WP12-2DB) from the power supply, passing it past each light fixture. The wire should be within a few inches of the mounting location to allow for power connections.
- Install each light fixture, making sure to conceal and protect the wiring.
For further assistance or troubleshooting, please refer to the user manual or contact our customer support at:
FAQ
- Q: Can I use a different gauge wire for the installation?
- A: It is recommended to use either WP14-2DB or WP12-2DB landscape wire for proper power distribution and safety. Using a different gauge wire may result in inadequate power supply or potential hazards.
- Q: Can I install the LED Ready Hardscape Light underwater?
- A: No, the LED Ready Hardscape Light is not designed to be submerged in water. It is recommended to avoid direct exposure to water or other liquids to ensure proper functionality and longevity of the product.
- Q: Can I replace the bulb with any compatible bulb?
- A: The LED Ready Hardscape Light is designed to work with compatible bulbs. Please refer to the user manual or contact our customer support for a list of recommended bulbs to ensure optimal performance and compatibility.
MORE INFOAMTION
- Rev Date: V3 06/19/2023 4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
- Phone : 866-590-3533
- Website: superbrightleds.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>