EGO PAD1800 56-VOLT Power Inverter Instruction Manual

EGO PAD1800 56-VOLT Power Inverter

Product Information

• Specifications:
  • Product: Power Inverter
  • Wave Type: Pure Sine Wave
  • Power Output: 180W
  • Input Voltage: 120V
  • Input Current: 1.5A
  • Model Number: PAD1800/PAD1800-FC

Product Usage Instructions

• Safety Instructions:
  • When using this power inverter, it is important to follow these safety guidelines:
  • Read and understand the Operator’s Manual before using the product.
  • Keep the product away from children and ensure close supervision when in use near them.
  • Avoid putting fingers or hands into the product to prevent injuries.
• Operating Instructions:
  • To operate the power inverter, follow these steps:
  • Ensure that the input voltage is within the specified range (120V).
  • Connect the power inverter to a suitable power source.
  • Make sure all devices to be powered by the inverter are turned off.
  • Connect the devices to the power inverter using the appropriate cables or connectors.
  • Turn on the power inverter using the designated power switch.
  • Monitor the power usage and ensure it does not exceed the maximum power output (180W).
• Maintenance:
  • To ensure the longevity and optimal performance of the power inverter, follow these maintenance tips:
  • Regularly inspect the power inverter for any signs of damage or wear.
  • Keep the inverter clean and free from dust or debris.
  • Avoid exposing the inverter to extreme temperatures or moisture.
  • Store the inverter in a dry and safe location when not in use.
• FAQ:
  • Q: What is the maximum power output of this power inverter?
  • A: The maximum power output of this power inverter is 180W.
  • Q: What is the input voltage range for this power inverter?
  • A: The input voltage range for this power inverter is 120V.
  • Q: Can I connect multiple devices to this power inverter?
  • A: Yes, you can connect multiple devices to this power inverter as long as the total power usage does not exceed 180W.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.

WARNING: Be sure to read and understand all safety instructions in this Operator’s Manual, including all safety alert symbols such as “DANGER”, “WARNING”, and “CAUTION” before using this machine. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.

| This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER| DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING| WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION| CAUTION, used with the safety alert symbol, indicates a hazardous situation that, if not avoided, will result in minor or moderate injury.

DAMAGE PREVENTION AND INFORMATION MESSAGES
These inform the user of important information and/or instructions that could lead to equipment or other property damage if they are not followed. Each message is preceded by the word “NOTICE”, as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are not followed.

SYMBOLS

This page depicts and describes symbols that may appear on this product. Read, understand, and follow all instructions on the product before attempting to assemble and operate.

SAFETY INSTRUCTIONS FOR POWER INVERTER

WARNING: When using this product, basic precautions should always be followed, including the following:

• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put your fingers or hands into the product.
• Use of an attachment not recommended or sold by a power pack (inverter) manufacturer may result in a risk of fire, electric shock, or injury to persons.
• To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack (inverter).
• Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not operate the power pack (inverter) with a damaged cord or plug, or a damaged output cable.
• Do not disassemble the power pack (inverter), take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
• To reduce the risk of electric shock, unplug the power pack (inverter) form the outlet before attempting any instructed servicing.
• When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact.
• If contact accidentally occurs, flush with water. If liquid contacts the eyes, seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not expose a power pack (inverter) to fire or excessive temperature. Exposure to fire or temperature above 265 °F (130 °C) may cause an explosion.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.

WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference

• Risk of fire and electric shock. Dry location use only. Do not expose the power inverter to rain or wet conditions. Water entering the power inverter will\ increase the risk of electric shock.
• For household use only.
• Do not allow the power inverter to be used as a toy. Close attention is necessary when used by or near children.
• The power inverter is not intended for any use other than charging small USB electronics or small AC devices specified in SPECIFICATIONS in this manual. Any other use may result in damage.
• Switch off the power inverter when not in use.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to the battery pack, and picking up or carrying the power inverter. Carrying the power inverter with your finger on the switch or energizing power inverter that has the switch on invites accidents.
• Disconnect the battery pack from the power inverter before making any adjustments, changing accessories, or storing the power inverter. Such preventive safety measures reduce the risk of starting the power inverter accidentally.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use a power inverter only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• Use only with the battery packs and chargers listed below:

BA1400, BA1400-FC,BA2800, BA2800-FC, BA4200, BA4200-FC, BA1400T, BA1400T-FC, BA2242T, BA2242T-FC, BA2800T, BA2800T-FC, BA4200T, BA4200T-FC, BA3360T, BA3360T-FC, BA4480T, BA4480T-FC, BA5600T, BA5600T-FC, BA6720T, BA6720T-FC| CH2100, CH2100-FC, CH3200, CH3200-FC CH5500, CH5500-FC, CH2800D, CH2800D-FC CH7000, CH7000-FC

• When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
• Do not modify or attempt to repair the power inverter or the battery pack except as indicated in the instructions for use and care.
• Store idle power inverter out of the reach of children and do not allow persons unfamiliar with the power inverter or these instructions to operate the power inverter. Power inverters are dangerous in the hands of untrained users.
• Maintain power inverter and accessories. Check for misalignment or breakage of parts and any other condition that may affect the power inverter’s operation. If damaged, have the power inverter repaired before use. Many accidents are caused by poorly maintained power inverters.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference.
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Save these instructions. Refer to them frequently and use them to instruct others who may use this product. If you lend this product to someone else, also lend these instructions to them to prevent misuse of the product and possibly injury.

INTRODUCTION

• Congratulations on your selection of the 56V Lithium-ion Power Inverter. It has been designed, engineered, and manufactured to give you the best possible dependability and performance.
• Should you experience any problem you cannot easily remedy, please contact the EGO customer service center at 1-855-EGO-5656.
• This manual contains important information on to the safe assembly, operation, and maintenance of your product. Read it carefully before using the product. Keep this manual handy so you can refer to it at any time.
  • SERIAL NUMBER__
  • DATE OF PURCHASE ____
• YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE

SPECIFICATIONS

seconds
Weight (Without battery pack)| 1.5 lb (0.68 kg)
Recommended Ambient Temperature Range for Operation| 41°F – 104°F (5°C – 40°C)
Recommended Ambient Temperature Range for Storage| -4°F – 158°F (-20°C – 70°C)

PACKING LIST

DESCRIPTION

KNOW YOUR POWER INVERTER (Fig. 1)
The safe use of this product requires an understanding of the information on the product and in this operator’s manual, as well as knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

• Power Button (with built-in LED Indicator)
  • To switch the power inverter on/off and indicate the power inverter status.
• AC and USB Output Ports
  • To connect with AC and USB devices.
• LED Button
  • Turns the LED light ON and OFF.
• LED Light
  • Provides light in low light conditions or serves as an emergency light beacon.
• Handle
  • Allows the user to carry the power inverter.

OPERATION

• WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.
• WARNING: Do not modify or attempt to repair the product except as indicated in the instructions for use and care.
• WARNING: This product is intended to be used indoors only. Do not use outdoors under any conditions.

APPLICATION
You may use this product for the purposes listed below:

• Supplying power for small AC devices via AC output port.
• Supplying power for compatible small USB electronics via USB-A or USB-C output ports.
• Providing light in low light conditions or serving as an emergency light beacon.

INSTALLING/REMOVING BATTERY PACK (Fig. 2)
NOTE: Fully charge the battery pack before first use.

To install the battery pack

• Align the mounting slots on the power inverter with the ribs on the battery pack, then move the power inverter towards the battery pack until it snaps into position.

WARNING: Make sure that the latch on the power inverter snaps into place and the battery pack is secured to the power inverter before beginning operation. Failure to securely seat the battery pack could cause the battery pack to fall out, resulting in serious personal injury.

To remove battery pack
Hold the battery pack with one hand and pull the power inverter with the other hand to separate them.
WARNING: Always be aware of location of your feet and children or pets around you when separating the battery pack from the power inverter. Serious injury could result if the battery pack fails. NEVER remove the battery pack at a high location.
WARNING: Always remove the battery when the power inverter is not in use.

TURNING POWER INVERTER ON/ OFF (Fig. 3)

1. Install the battery pack.
2. To turn the power inverter on, press the power button and the button will illuminate green, which indicates the power inverter is activated.
3. To turn the power inverter off, press the power button again and the green light will turn off, which indicates the power inverter is deactivated.

NOTE:

• If there is no device connected, the power inverter will shut off automatically in 2 hours.
• If devices are connected but the USB output current is not more than 2W and the
• AC output power is less than 5W, the power inverter will shut off automatically in 2 hours. LED LIGHT (Fig. 3)
• The power inverter is equipped with one LED light located on the top of the unit. The light provides light in low light conditions or serves as an emergency light beacon.
• The LED light could be turned on whenever the power inverter is activated or deactivated.
• To turn on the LED light, press the LED button. The light will turn on in low brightness mode.
• Press the LED button again to switch to high brightness mode.
• Press the LED button the third time to switch LED light off. In any mode, press and hold the LED button for more than 1 second and the light will switch into flashing, “EMERGENCY” mode. Press the LED button again, the light will shut off.

POWERING EXTERNAL DEVICES

1. Install a battery pack onto the power inverter.
2. Press the power button to turn on the power inverter. The LED in the power button will glow solid green, which means the power inverter is ready for supplying power.
3. Connect devices into the power inverter’s USB ports and/or 120V AC output port. The inverter will begin powering the devices automatically.
4. When the power inverter is not in use, disconnect devices from the power inverter, then press the power button to turn off the power inverter.
5. Remove the battery pack from the power inverter.

STATUS INDICATOR

OVER TEMPERATURE PROTECTION

• If the battery or power inverter temperature exceeds 158 °F (70 °C) during operation, the power button LED indicator will glow solid red for 1 minute, andthen the temperature-protection circuit will shut off the power inverter to protect from overheating damage. Allow the battery and the power inverter to cool until the temperature drops below 152 °F (67 °C) before restarting.

LOW BATTERY PACK CHARGE PROTECTION

• When the battery pack charge reaches a low level, the power button LED indicator will flash for 1 minute and then the power inverter will automatically shut down. Charge the battery pack.

OVERLOAD OR SHORT CIRCUIT PROTECTION

• When the connected AC device draws more than the rated power of the port, the power button LED indicator will flash red quickly for 1 minute, and then the power inverter will automatically shut down.
• Disconnect the AC device.

MAINTENANCE

WARNING: To avoid serious personal injury, always remove the battery pack from the power inverter when cleaning or performing any maintenance.
WARNING: When servicing, use only identical replacement parts. Use of any parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician.
GENERAL MAINTENANCE

• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use a clean cloth to remove dirt, dust, oil, grease, etc.
• WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which may result in serious personal injury.

STORING THE POWER INVERTER

1. Remove the battery pack from the power inverter.
2. Clean the power inverter thoroughly before storing it.
3. Store the power inverter in a dry, well-ventilated area, locked up or up high, out of the reach of children. Do not store the power inverter on or adjacent to fertilizers, gasoline, or other chemicals.

TROUBLESHOOTING

drops below 152 °F (67 °C).
¡ Other electronics error.| ¡ Contact the EGO customer service center for repair.

LIMITED WARRANTY

EGO LIMITED WARRANTY WARRANTY POLICY TERMS AND DURATION

Chervon North America, Inc. (“Chervon North America”) provides the following Limited Warranty for EGO products to the original purchaser of EGO products. The detailed warranty period for each EGO product can be found online at http://egopowerplus.com/warranty-policy. Please contact EGO Customer Service Toll-Free at 1-855-EGO-5656 any time you have questions or warranty claims or would like a hard copy of the warranty.

LIMITED SERVICE WARRANTY
EGO products are warranted against defects in material or workmanship from the date of original retail purchase for the applicable warranty period. For any properly and timely submitted warranty claim, if Chervon North America determines a product to be defective during the warranty period, the product will receive free repair or replacement as determined by Chervon North America.

HOW TO OBTAIN SERVICE
For warranty service, within the applicable warranty period, please contact EGO customer service toll-free at 1-855-EGO-5656. When requesting warranty service, you must present the original dated sales receipt. An authorized service center will be selected to evaluate and repair the product if defective according to the stated warranty terms. When bringing your product to the authorized service center, there may be a small deposit that will be required when dropping off your tool. This deposit is refundable when the repair service is deemed to be covered under warranty.

ADDITIONAL LIMITATIONS & EXCLUSIONS
This limited warranty applies only to the original purchaser from an authorized EGO retailer and is not transferable. EGO products shall not be considered defective, and this warranty will not apply, where the claimed defect is attributable to any cause other than the above-defined defects. This warranty shall be void if the product has been used for rental purposes. This warranty shall not apply to damage caused by accident, abuse, misuse, alteration, modification, unauthorized repair, liquid contact, fire, earthquake, or other external cause; operating the product outside EGO’s instructions, specifications, or guidelines; or failure to properly service of maintaining the product. This warranty also
does not apply to cosmetic damage, including but not limited to scratches or dents; defects caused by normal wear and tear, or otherwise due to the normal aging of the product. THIS EXPRESS WARRANTY IS GIVEN INSTEAD OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE OR USE, WHICH ARE DISCLAIMED. Any implied warranties, including warranties of merchantability or fitness for a particular purpose, that cannot be disclaimed under state law are limited to the applicable warranty period defined at the beginning of this article. The sole and exclusive remedy in connection with the purchase, installation, use, and/or performance of the EGO products is repair or replacement of the product as determined by Chevron North America. Chervon North America’s maximum liability shall not in any case exceed the purchase price paid for the product. CHERVON NORTH AMERICA SHALL NOT BE LIABLE TO THE USER OR TO ANYONE ELSE FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, EXEMPLARY, INDIRECT, OR PUNITIVE DAMAGES ARISING FROM USE OF THE PRODUCTS, INCLUDING BUT NOT LIMITED TO PERSONAL INJURY, DEATH, PROPERTY DAMAGE, LOST PROFITS, OR OTHER ECONOMIC INJURY. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on how long an implied warranty lasts, the exclusion or limitation of incidental or consequential damages, or the limitations on time to bring certain actions, so such limitations contained herein do not apply to individual consumers in those states. This warranty is subject to and shall be interpreted according to Michigan law without regard to principles of conflicts of laws. No legal action shall be brought against Chevron North America unless filed within one (1) year after the basis for such legal action becomes known, or with the exercise of reasonable diligence should have become known. Any action not timely filed shall be deemed waived.

CONTACT

• For customer service contact us toll-free at: 1-855-EGO-5656 or
• EGOPOWERPLUS.COM.
• EGO Customer Service
• 769 Seward Ave. NW, Suite 102
• Grand Rapids, Michigan 49504.
• 56-VOLT POWER INVERTER — PAD1800/PAD1800-FC

WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference. READ AND UNDERSTAND OPERATOR’S MANUAL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>