innova SW-20 Smart Watch Fitness Twister User Manual

innova SW-20 Smart Watch Fitness Twister

INSTRUCTION

Thank you for using our smart watch INNOVA.
Important! The data provided by the smartwatch, such as heart rate, blood oxygen, and blood pressure, are merely indicative, it is not an exact medical measuring device.
Even if you are well, go to all the appointments scheduled by your doctor.

Recommendations for people with sensitive skin during use of electronic wrist devices, Smartwatch, and Smartband.

• The materials used for our INNOVA Smartwatches and smart bands are selected following a rigorous control of hypoallergenic measures, as well as guaranteeing that all materials comply with current regulations for materials in contact with the skin.
• A small number of people, however, may experience some type of skin reaction.
• If you suspect, or know, that you are allergic or have an above-average sensitive skin type, you should monitor the use of these devices for any type of reaction due to said allergies, environmental factors, or prolonged exposure to irritants, like soap, sweat, or other causes.
• Smartwatches and Smartbands may contain materials such as nickel and acrylates which, even though they are within the per-mitted amounts in the manufacturing process, may cause the skin to react if you are sensitive to them.
• If you use these devices for a prolonged period, you may be more susceptible to developing skin sensitivities.

To avoid possible skin irritations we recommend you do not expose the device to chemicals or use it if your skin has, or has been recently applied with, any of the products listed below:

• Insect repellents
• Moisturizing creams and lotions
• Oils
• Perfumes
• Antiseptic gels
• Soaps
• Sun protection creams

It is recommended that the devices are used when the skin
is completely dry and free of any of the aforementioned products to avoid having to charge contacts and measurement sensors in contact with wet skin. They are not submersible or waterproof. Clean the device thoroughly to remove sweat after training and allow it to dry. Prolonged exposure to moisture can cause skin irritation.

• It is also advisable not to wear these devices too tight or too loose. If the strap is too tight, it may cause skin irritation. If the strap is too loose, chafing may occur.
• The watch strap should be left so that it can move slightly back and forth on the wrist.
• If you wear the device for prolonged periods, remove it to give your skin a rest. To avoid irritation, swap the device to your other wrist.
• If you notice redness, swelling, itching or any other irritation, remove the Smartwatch immediately and consult your physician before using the device again.

Special attention must be paid to the use of these devices in places with relatively low humidity conditions.

When using the Smartwatch/Smartband in places with low relative humidity (dry/poorly ventilated places, low humidity atmospheric conditions, dry indoors, if heating or air conditioning is always on, etc.), as with any other electronic device, it may be affected by charges of static electricity on rare but certain occasions. This may cause damage to the device and also to the person wearing it at that time. Static electricity is everywhere.
It surrounds us without us perceiving it.
An effective trick to avoid a high percentage of static electricity at home:

• Use a humidifier. Humidity is a good conductor of electricity therefore, by maintaining an acceptable percentage of it, we will avoid static in areas of the home where we metal objects may be found. Small containers of water on top of radiators is another alternative solution.

The use of the devices in bed, whilst sleeping, is especially discouraged for children and the elderly because repeated movements during the night may cause, through friction with sheets, blankets, etc. a charge of static electricity. This may result in a sudden discharge of the watch’s battery and/or heating of the same as the human body is a conductive element and can cause a reaction to people with sensitive skin, redness, irritation, etc. If you notice redness, swelling, itching, or any other form of irrita-tion, remove the Smartwatch immediately and consult your physi-cian before using the device again in case you are suffering from any type of reaction, allergic or otherwise.u

INNOVA CELLULAR.

Before using the device please read this instruction manual in its entirety.

Wearing
Place the bracelet on your wrist, and adjust the strap for a comfortable wear, ensuring the sensor is in contact with your skin. If the sensor is not in contact with your skin, the measurements will not be accurate.

Charging
Before using the device for the first time, please ensure the battery is charged. If the device does not turn on, please connect it to the battery charger for it to activate.

Pairing device to phone
IMPORTANT: Please do not pair your device directly to your phone’s Blue- tooth. If you have already done this, please remove it from “paired devices” as it will prevent its connection to the application. 1.Download the application Smart Bracelet Fit Pro from the Google Play Store / Apple Store or scan the following QR Code and install it.

USING INSTRUCTION

1. Minimum System requirements: Android 5.0; iOS9; Bluetooth 4.2

2. Open the application and grant all access requests.

3. To finish pairing, press the “Set” icon and then press “Bind devices to…” banner (highlighted). You will then find “SW-20” which, once selected, will pair to your phone.
   The watch should now show the local date and time and the top of the application should appear as follows: From “Message Push” you can set up the APPS from which you wish to receive information on your device (Calls, WhatsApp, Facebook, Twitter, etc.).
   Restarting and/or removing the device will cause data to be deleted.

4. In the “Step” icon you can view your daily steps and your set objectives / targets. Fur-ther below, you can also view a summary of the distance walked as well as other information such as your heart rate and/or sleeping patterns.
   If you press on the infor-mation displayed, another screen will open, and you can start measuring your heart rate or see the details of your sleeping habits. At the bottom you will find “Healthy habit” in which you can specify
   “eat breakfast”, “go to bed early”, etc.

5. Within “Motion” you will find different options such as “walk”, “run” or “bike”. Pressing “Start” and having your GPS activated, you can see the distances achieved as well as the route. To stop swipe the lower bar to the right and press “End”. To see the route, press the gear icon.

6. Press “Mine” to view details of different data, a summary of your activities and, in “User Profile”, establish your personal information (sex, age, height, etc.).

Function description

• Power on: Long press lateral button
• Long press the home button to switch off the device
• To navigate swipe up and down or left and right to scroll through the main menu and dial.
• Swipe left and right from the homepage to go to step count, heart rate measurement & APP QR code.
• On standby long-press the screen for 2 seconds to switch between different dials.
• To select a watch face, long press and apply.
• The reset device feature clears all data in the fitness tracker and restores the factory setting.
• To start any function enter the interface screen and wait for 60 seconds to start the count.
• For eg. to start the three-in-one HR BP and Blood oxygen count, swipe to the screen and wait for a few seconds, the count will start automatically

Interfaces

• Tracks Step: This interface is to track no steps, distance traveled, and calories burned.

  • Number of steps: Wear the watch and record the number of steps you take in real-time steps.
  • Distance: The distance of motion is estimated based on the number of walking steps.
  • Calorie: Estimate the calories burnt based on the number of walking steps.

• Health: This interface is to track HR, BP, and Blood oxygen levels after swiping to the “health” interface for a few seconds, the current heart rate, blood pressure, and blood oxygen level results will be displayed on the screen.

• Multiple sports mode: This interface is to track  and monitor physical activity and workouts through the 11 predefined sports modes you can monitor your workouts accurately and keep a check on your calorie burn.

• Information mode: The watch is capable of pushing multiple reminder messages, and notifications.

• Incoming call alert

• In the connected state, if the call alert function is enabled, for incoming calls the watch will vibrate and display the name or number of the caller

• SMS Notifications

• In the connected state, if the SMS reminder function is enabled, the watch will vibrate when there is a text message.

• Other Notifications

• In the connect state, if this function is enabled, for any notifications and messages on WhatsApp, Instagram, Facebook, etc. The watch will vibrate to remind and display the message.

• P.S.

• You can view the last three messages/notifications from the menu. You need to give the APP permission to get a system notification. The watch can display up to 40 words only.

• APP function and settings

• Personal information

• To setup personal information, go to settings and set your personal information like name, gender, age, height and weight.

• You can also set your daily goal and steps to monitor your daily activity

• Sleep mode

• When you fall asleep, the watch will automatically enter the sleep mode and will automatically detect and monitor your sleep pattern (deep sleep / shallow sleep / wake up) all night to accurately calculate your sleep quality

• P.S

  • Sleep data can be seen from the watch or APP
  • Wearing the watch to sleep is a must to track sleep patterns.
  • Sleep mode will get activated at 10 pm

• Alarm setting
  In the connected state, 8 alarms can be set. After setting the alarm, it will be synchronized to the watch.
  After syncing the alarm with the watch through the app, it will function even if the watch is not connected to the app.

• Remote photography
  In the connected state, start the photo from the watch or the APP to enter the remote camera interface. Shake the watch to remotely click the photo automatically. Please allow the APP to access the photo album to save the clicked photo.

• Sedentary reminder
  By setting the sedentary reminder function, you can choose to get reminded by the watch to move around when you are sitting for a longer time.

• Find your watch function
  In the connected state, click the “Find My Watch” option and the watch will vibrate.

• Raise your hand to switch on
  On standby when you lift your wrist and turn the screen, it lights up coming out of sleep mode

• Do not disturb mode
  Turn on the do not disturb mode. You can set the do not disturb period. During the set period, the watch stops receiving notifications and messages.

• Device reset
  This feature resets the watch to factory setting and erases all the previous data/information.

• Remove device
  This feature will erase data from the app and remove the device.

Other information

• When there is a call, message or other reminder the watch will vibrate.

P.S.

• Turn on the vibration to set this function
• If the vibration feature is switched off, the watch will only show a reminder on the screen without shaking to avoid any disturbance. Tips for Android users:
• When using the reminder function, you need to set it to allow
• “FitPro” to run in the background. It is recommended to add “FitPro” to the rights management and allow all permissions. Precautions
• The watch remains connected to the APP at all times to continue to sync data.
• Use the original charging cable provided in the packaging only to charge your watch
• Do not expose the watch to high moisture, high temperature or very low temperatures for a long duration of time.
• Do not expose the watch to extreme temperatures, the batteries could be exploited.
• If the watch appears to crash and restart, please check the phone memory information to clear space or exit the APP and reopen to reconnect it again.
• The watch is not waterproof

Features

Step / Distance / Calories / Heart rate / Blood pressure / Oxygen saturation / Sleep monitoring / Alerts (call, SMS, Whatsapp….) /  Alarm clock / Sedentary reminder / Different exercise mode / Turn the wrist and shine the screen / Find watch / Remote photography /Rejection of calls / Compatible with iOS 9.0 and above, Android 5.0 and above / Battery capacity:  150 mah (Up to 7 days (depending on the use)) / Splash resistant (NO WATERPROOF) / Bluetooth frequency band: 2.4 Ghz / Maximum emitted RF power < 100 mW Customer Service Only in English or Spanish Servicio de atención al cliente / Customer Service: +34 91 713 94 98

Horario de atención al cliente
De lun. a Jue. de 08:00 a 14:00 y de 15:30 a 17:30 y los Vier. de 09:00 a 14:00 Working hours: Mon to Thu from 08:00 to 14:00 and from 15:30 to 17:30 and Fri. from 09:00 to 14:00 sac@innovacelular.com

Declaration of conformity

• Through this INNOVA CELLULAR, it declares that the
• INNOVA SMART WATCH FITNESS TWISTER (SW/20 (Y77 360CH SENA)) complies with the essential requirements and any other applicable or enforceable provisions of Directives
• 2014/53/UE (RED) and RoHS 2011/65/EU annex II amending annex (EU) 2015/863 and amended by Directive (EU) 2017/2102, of the European Parliament and of the Council, transposed to Spanish legislation through Royal Decree 188/2016, of May 6, 2016. To see the complete declaration of conformity, you can access it through the following link: http://www.innovacelular.com/images/web/descargas/descargas/declaracion/declaracion_sw-20.pdf

Guarantee

NOTE: The INNOVA SMART WATCH FITNESS TWISTER (SW/20 (Y77 360CH SENA)) has a two-year warranty from the date of purchase, except for parts with wear and tear, such as batteries, they have a 6-month warranty from the date of purchase.

+34 91 713 94 98
INNOVA CELULAR SL C/ Severo Ochoa Nº 9 nave 8B
28521 Rivas-Vaciamadrid
Madrid

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>