RELAX4LIFE BB0498 4 in 1 Camping Cot Baby Cradle with Changing Table Instruction Manual

RELAX4LIFE BB0498 4 in 1 Camping Cot Baby Cradle with Changing Table

Product Information

• Specifications:
  • Product: Toy Storage
  • Weight Capacity: MAX 10 kg (22 lbs.)

Product Usage Instructions

1. Storage Assembly:
2. To assemble the storage unit, follow these steps:
3. Identify the two tubes labeled as Tube B and the two tubes labeled as Tube A.
4. Attach the clips of the storage to the top rail.
5. Turning Toy Bar with Music Box Assembly:
6. To assemble the turning toy bar with a music box, follow these steps:
7. Hanging the music box on the bracket hook.
8. Put the bracket onto the short handrail.

Frequently Asked Questions (FAQ)

• Q: What is the weight capacity of the toy storage?
  • A: The weight capacity of the toy storage is a maximum of 10 kg (22 lbs.).

Before You Start

Please read all instructions carefully and keep it for future reference.

General Warnings:

• Attention: TO prevent possible injury by entanglement, remove this toy when the child starts trying to get up on its hands and knees in a crawling position.
• Danger! Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.
• The product must be installed and used under the supervision Of an adult.
• Read through each step carefully and follow the proper order.
• Remove all Packaging, separate and count all parts and hardware before Installation.
• Please ensure that all parts are correctly installed, incorrect Installation can lead to a Danger.
• We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Ensure a secure surface during construction, and place the product always on a flat, steady and stable surface.

IMPORTANT

• IMPORTANT! TO Of your CO-Sleeper, please follow these instructions and keep for future reference.
• IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. Never use if any parts are missing or broken.
• WARNING: Never leave infant in product with sides down.
• WARNING: Infants can suffocate:

1. In gaps between the mattress and the sides Of the camp cot. Ensure that the mattress is the correct size for your camp cot. You should not be able to fit more than 2 fingers between the sides of the camp cot and the sides of the mattress.
2. On soft bedding, loose pillows, duvets, cot bumpers, soft toys should be removed from baby’s sleep space.
   • WARNING: Failure to follow these warnings and the instructions could result in serious injury or death.

Co-sleeper Camp Cot

Contents Check List: Check that you have all the parts for this model before assembling your co-sleeper camp cot.

Assembly Instructions

1. Unzip the storage bag to access your co-sleeper camp cot. Remove all the contents.
2. Spread the folded camp cot. Secure each side individually by holding one hand on either side of the hinged side bar (as shown in image) and pull up sharply to lock the hinge.
3. All 4 sides need to be locked (step 2) before you press down the centre floor of the camp cot.
   • IMPORTANT! If you press down and lock the floor of your camp cot before locking all 4 sides, you will need to release the floor of the camp cot first before you can repeat step 2.
4. Clip in the bassinet (suitable 0-6 months) making sure that the velcro tabs are on the same side as the lowering bar.
5. Insert the metal pipes into the base of the bassinet. Make sure you have made a secure connection between the metal poles.
6. Unfold the mattress and place on the metal pipes. The hard ply wood side should be resting on the metal poles.

How to convert your camp

How to convert your camp cot to the co-sleeping position:

IMPORTANT! Falling Hazard Remove the infant from this product before starting any conversions.

• Release the velcro tabs on the inside of the bassinet at either end of the lowering sidebar.
• Find the backing lever on both sides of the lowering sidebar.
• Squeeze the lever upwards to unlock (as shown) then press on the sidebar to slide and lower the bar down to the desired height.
  • NOTE: There are 2 levels that the lowering bar can be dropped to.
• Choose the height best suited to your bed. Place your co-sleeper camp cot right up against your bed and secure it in place by locking the wheels. Your camp cot is now in the co-sleeping position. It is now safe to place the baby in the camp cot.
  • WARNING: The top edge of the lowering sidebar must be level with or below the top of the adult bed mattress.
• Never raise the baby’s mattress in the co-sleeper camp cot above the top of the lowering side bar.

How to convert your camp cot back to the free-standing position:
IMPORTANT! Falling Hazard Remove infant from this product before starting any conversions.

1. Squeeze the lever upwards to unlock. Pull one side of the lowering bar up at same time. A “click” will indicate that they are safely secured in place.
2. Re-attach the velcro tab on the inside of the bassinet on either Side of the lowering bar.
3. Your camp cot is now safe to use as a free-standing cot. The bassinet is suitable for babies 0-6 months.
   • NOTE: As soon as baby is able to pull themselves up on the sides of the cot, remove the bassinet and place the mattress on the lower level.

Changing Table

Assembly Instructions:

Storage assembly

Attach the clips of the storage to the top rail.

Turning toy bar with music box assembly

Hanging the music box on the bracket hook, then put the bracket onto the short handrail

WARNING:

• This product must not be used for children weighing more than 331bs(15kg). Always secure the baby on the change mat with the safety clasp.
• NEVER leave the baby unattended.
• Never use the baby changing table if any parts are defective, broken or missing.
• When changing the baby on the changing table, ensure that the wheels are always in the locked position.
• Regularly check all assembly fittings.

CARE AND MAINTENANCE

• Please clean, maintain, and check this product regularly. Any additional or replacement parts must be obtained exclusively from the manufacturer/supplier.
• Keep the camp cot away from the intense heat of open fires, electric or gas heaters etc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>