RELAX4LIFE HBB-2022-139 5 in 1 Newborn Cot with Mattress Camping Cradle Instruction Manual

June 13, 2024
RELAX4LIFE

RELAX4LIFE HBB-2022-139 5 in 1 Newborn Cot with Mattress Camping Cradle

Instruction Manual

Before You Start

Please read all instructions carefully and keep it for future reference.

General Warnings

Attention: To prevent possible injury by entanglement, remove this toy when the child starts trying to get up on its hands and knees in a crawling position.
Danger! Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware before installation.
Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during installation, and place the product always on a flat, steady and stable surface.

IMPORTANT!
IMPORTANT!
To ensure safe operation of your baby playard, please follow these instructions and keep for future reference.

IMPORTANT!
Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges.
Never use if any parts are missing or broken.

****WARNING: Infants can suffocate:

  1. In gaps between the mattress and the sides of the baby playard.
    Ensure that the mattress is the correct size for your baby playard.
  • You should not be able to fit more than 2 fingers between the sides of the baby playard and the sides of the mattress. 2. On soft bedding, loose pillows, duvets, cot bumpers. Soft toys should be removed from baby’s sleep space.

****WARNING: Failure to follow these warnings and the instructions could result in serious injury or death.

PRODUCT LIST

WHEN OPEN THE PARCEL, PLEASE CHECK IF IT HAS CONTAINED ALL ITEMS BELOW:

FIG 1 PRODUCT LIST.JPG

FIG 2 PRODUCT LIST

HOW TO OPEN THE BED

FIG 3 HOW TO OPEN THE BED.JPG

HOW TO ASSEMBLE ROCKING TUBES

Like following pictures and process, assemble rocking tubes at two bottom short sides. If you want to cancel the rocking tubes, just fold the rocking tubes inside, no need to remove the rocking tubes.

FIG 4 HOW TO ASSEMBLE ROCKING TUBES.JPG

HOW TO ASSEMBLE MUSIC&TOYS RACK

FIG 5 HOW TO ASSEMBLE MUSIC&TOYS RACK.JPG

Insert the 3 toys, toy bars and music box as the shown.

HOW TO ASSEMBLE CHANGING TABLE

FIG 6 HOW TO ASSEMBLE CHANGING TABLE.JPG

WARNING :
DO NOT LEAVE YOUR CHILD UNATTENDED IN THE CHANGING TABLE. NEVER LEAVE CHANGING TABLE IN PLACE WHEN CHILD IS IN THE BABY PLAYARD.

UPGRADE TO USE AS CO-SLEEPING BED

One side of bed can be lifted up or down to connect with adult bed by 4 different heights.
No.1 height is the height of second layer.
No.2 & 3 are other 2 heights as your personal preference.
No.4 is the height of baby bed.

FIG 7 UPGRADE TO USE AS CO-SLEEPING BED.JPG

HOW TO CONNECT ADULT BED

To connect the baby bed with adult bed and keep baby away from dropping down and harm, we strongly suggest to do like below:

FIG 8 HOW TO CONNECT ADULT BED.JPG

HOW TO FOLD THE PLAYARD

  • Take off all changing table/music&toys rack/storage rack/mattress etc, only leave bed body for folding.
  • Lift the ring up at the bottom of the bed.
  • Hold the folding switch in the middle of the handrail.
  • Press down & fold two long sides down to shape ”V”; press down & fold two short sides down to shape ”V”.

FIG 9 HOW TO FOLD THE PLAYARD.JPG

SPECIAL NOTICE:
When folding the bed, please press the bed body firmly (FIG.11).
Because the long side handrail is not fully pressed down, you need to fold it again to press the long side handrail button until its flank is at a right angle (FIG.12).

FIG 10.JPG

Return / Damage Claim Instructions

****DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box. Without this your return will not be accepted.

****Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.

****Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.

****Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals