INNOVA AUR-30 INCROSS Wireless Headphones with Rear Cable User Manual
- June 15, 2024
- InnOVA
Table of Contents
INNOVA AUR-30 INCROSS Wireless Headphones with Rear Cable
Product Information
Specifications
- Model: AUR/38 (AUR-30)
- Type: Wireless headset with rear cable
- Compatibility: Bluetooth enabled devices
- Battery Charging Time: Approximately X hours
- Battery Life: Up to X hours of talk time
- Bluetooth Version: X.X
- Weight: X grams
Product Usage Instructions
Charging the Battery
- Connect the charger cable to the charging socket on the headset.
- Plug the charger into a wall (A/C) outlet.
- The indicator light will turn red to indicate charging and will turn off when fully charged.
- Disconnect the charger from the headset and the wall outlet.
Power On/Off
To power on the headset:
- Press and hold the answer/end button for about 3 seconds until the light flashes blue.
To power off the headset:
- Press and hold the answer/end button for about 6 seconds.
Pairing with a Bluetooth Enabled Device
- Turn on the headset. The red/blue LED will start flashing.
- Turn on the Bluetooth feature on your device and search for available devices.
- Select the headset when it appears in the list of available devices.
- Enter the passcode “0000” when prompted.
- If the pairing is unsuccessful, repeat the steps. Pairing only needs to be done once.
- If pairing is successful, the light will flash blue, indicating the headset is in standby mode and ready to make/receive calls.
Answering a Call
To answer a call:
- Press the answer key on your phone, or
- Press the answer/end key on the headset briefly.
Ending a Call
To end a call:
- Press the end key on your phone, or
- Press the answer/end key on the headset briefly.
Rejecting a Call
To reject a call:
- Press the end key on your phone, or
- Press and hold the answer/end key for about 1 second when the phone is ringing.
Making a Call
To make a call:
- Dial the number from your phone.
- Press the call key on your phone, and the call will automatically be transferred to the headset.
Dialing the Last Called Number
To dial the last called number:
- Press the answer/end key twice (2 short presses) when the headset is in standby mode.
Adjusting Headset Volume
To adjust the volume:
- Press the volume up key on your headset to increase the volume.
- Press the volume down key on your headset to decrease the volume.
Storing the Headset
After usage, store the headset in a safe and dry place to prevent damage.
FAQ
Q: How long does it take to fully charge the battery?
A: It takes approximately X hours to fully charge the battery.
Q: How long is the battery life?
A: The battery provides up to X hours of talk time.
Q: Can I pair the headset with multiple devices?
A: Yes, the headset can be paired with multiple Bluetooth enabled devices. However, it can only be connected to one device at a time.
Charging the battery
A battery must be fully charged before first use
- a. Connect the charger cable to charging socket on headset
- b. Plug the charger to a wall (A/C) outlet
- c. Indicator light is red when charging and off when fully charged
- d. Disconnect charger from headset and from wall outlet
Headset power on/off
- a. To power on: press and hold answer/end button for about 3 seconds until light flashes blue
- b. To power off: press and hold answer/end button for about 6 seconds
Pairing headset with a Bluetooth enabled device
- a. Turn on headset, pass 3 seg a red/blue LED flasing.
- b. Turn on device’s Bluetooth and search
- c. When phone finds headset, select it
- d. Enter passcode 0000 when prompted
- e. Repeat steps if the pairing was unsuccessful. You only need to pair once
- f. If pairing was successful light will flash blue, indicating in standby mode and ready to make/receive calls
Answer a call
- a. Press the answer key on your phone or
- b. Press the answer/end key on headset briefly
End a call
- a. Press the end key on your phone, or
b. Press the answer/end key on headset briefly
Reject a call
- a. Press the end key on your phone, or
- b. Press and hold the answer/end key for about 1 second when phone is ringing
Make a call
- a. Dial the number form your phone, then press the call key on your phone and call is automatically transferred to the headset
Dial the last called number
- a. Press the answer/end key twice (2 short presses) when headset is in standby mode.
Adjusting headset volume
a. Press volume up key on your headset to increase volume
b. Press volume down key on your headset to decrease volume
Storing headset
a. Power off the headset
b. Temperature range 10º- 14ºC / 60º- 134ºF
c. Do not expose the headset to rain or liquids
Declaration of conformity
Through this INNOVA CELLULAR, it declares that the AURICULARES WIRELESS CON CABLE TRASERO INNCROSS (AUR/38 (AUR-30)) complies with the essential requirements and any other applicable or enforceable provisions of Directives 2014/53/UE and RoHS 2011/65/EU, Annex II amending Annex (EU) 2015/863 and amending Annex (EU) 2017/2102. To see the complete declaration of conformity, you can access it through the following link: http://www.innovacelular.com/images/web/descargas/descargas/declaracion/declaracion_aur-38.pdf
Customer service
Only in English or Spanish Servicio de atención al cliente / Customer service (Español /English): +34 902 090 079 / +34 91 713 94 98Horario de atención al cliente: De lunes a jueves de 08:00 a 14:00 y de 15:30 a 17:30 y los viernes de 09:00 a 14:00Working hours: Mon to Thu from 08:00 to 14:00 and from 15:30to 17:30 and Fri. from 09:00 to 14:00 sac@innovacelular.com Note: o not expose the headset at extreme temperatures, these could exploit. BT version: 5.0 / BT protocol: A2DP – AVRCP – HFP – HSP / Battery: 55 mAH / Charging power: 5V – 80 mAH / Sensitivity: 103dB +/- 3dB / Impedance: 32 MW / Transmission distance: 10 m / Talk and music time: About 2-3 hours / Standby time: About 120 hours / Microphone / Hand-free function / Music / BT frequency band: 2.4 Ghz / Maximum emitted RF power < 100 mW
NOTE: The AURICULARES WIRELESS CON CABLE TRASERO INNCROSS (AUR/38 (AUR-30)) has a 3-year warranty from the date of purchase. Special importance in the durability of the products have the elements that compose it and that suffer from degradation and loss of capacity due to their use, being understood as normal wear that they lose capacity, especially in the case of rechargeable batteries, depending largely on infi nity of external factors (hours of use, charge and discharge cycles, use of inappropriate chargers, temperatures of use, not respecting the recommended charging times, etc…) For the guarantee of wear and tear parts, it must be taken into account that the loss of autonomy of the battery as a result of its aging does not imply a manufacturing defect, so it is considered normal that after 6 months have a loss of 10%, at 15 months 20% – 30% at 24 months 45%, all corresponding to proper use of the battery and the charge and discharge cycles carried out. Any battery that presents symptoms other than those listed in this manual, will be inspected by the technical service and assessed for its affectation to guarantee. If after 24 months from its purchase the battery presents symptoms different from those detailed, it will be understood to be exempt from guarantee for the reasons stated above and will be left out of the inspection process, becoming the customer who, if they so wish, must reliably demonstrate that the battery presented defects other than those detailed in this manual before those 24 months
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>