SCOSCHE BTFM9 BTFREQ Pro Handsfree Car Kit with FM Transmitter User Manual
- June 15, 2024
- Scosche
Table of Contents
BTFREO™ PRO
DEVICE SETUP
SECTION A- Overview
SECTION B – Power Up & Bluetooth Pairing
SECTION C – Connecting to your Car’s Sterea
SECTION D – Reconnect to your Device & 3.5mm AUX OUT Connection
SECTION E – Streaming Music
SECTION F- Making a Call
SECTION G – Receiving a Call
SECTION H – Voice Assistant Activation & Dual-Port USB Charger
SECTION A
1. FM Channel Display
2. Tuning Knob
3. Microphone
4. Multifunction Button (MFB)
5. 12V Plug| 6. Channel Button
7.3.5mm AUX OUT (3.5mm audio cable not included)
8. USB-A Charging Port
9. USB-C Charging Port
---|---
SECTION B
Power Up & Bluetooth Pairing
- Plug the BIFREQ into your car’s 12V power socket.
- Enter the Bluetooth settings in your mobile device and enable the Bluetooth function. From the list of available accessories, find and select the “Scosche BIFM9″
- Your phone will confirm once it is connected. Once connected, ensure your device is set to maximum volume.
SECTION C
Connecting to your Car’s Stereo
Find a weak station on your FM radio that has no active broadcast signal.
Press the “CH” button (1), then turn the tuning knob to the left (2) or right
(3) to tune the BIFREQ to match the frequency of your FM radio.
If you experience interference you may have entered an area where there is an
active broadcast signal on the station you are tuned to. Repeat the above
steps to find a different clear station.
Note: Press “CH” button to change frequencies on BIFREQ (1).
SECTION D
Reconnect to your Device
Transmitter Off: Once paired, the transmitter will automatically reconnect
when powered on.
Transmitter On: Reconnect – Tap Multi-Function Button (MFB) once (x)
*Note: Only tap MFB if the transmitter does not automatically reconnect.
Optional AUX OUT Connection
The source unit can be connected to the BTFREQ through the AUX OUT port using
a 3.5mm audio cable (not included).
SECTION E
Streaming Music
Stream music using the music player on your phone. You can use the controls on
the BIFREQ to control the music settings:
Play/Pause – Tap the MFB once
Track Forward – Turn tuning knob right
Track Back – Turn tuning knob left
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>