SCOSCHE BTFM8 Handsfree Car Kit with FM Transmitter User Guide
- June 15, 2024
- Scosche
Table of Contents
SCOSCHE BTFM8 Handsfree Car Kit with FM Transmitter User Guide
DEVICE SETUP
Overview
SECTION A **
**
- LED Screen
- Multifunction Button
- Microphone
- Channel Button
- 12V Plug
- 5V, 2.4A USB-C Charging Port Port de charge USB-C 5V, 2,4A
- 5V, 1A USB-A Charging Port Port de charge USB-A 5V, 1A
SECTION B **
**
Power Up & Bluetooth Pairing
- Plug the BTFREQ into your car’s 12V power socket.
- Enter the Bluetooth settings in your mobile device and enable the Bluetooth function. From the list of available accessories, find and select the “Scorched BTFM8”.
- Your phone will confirm once it is connected. Once connected, ensure your device is set to maximum volume.
SECTION C **
**
Connecting to your Car’s Stereo
Find a weak station on your FM radio that has no active broadcast signal.
Press the “CH” button (1), then turn the Multi-Function Button/Knob left or
right (2) to tune the BTFREQ to match the frequency of your FM radio.
If you experience interference you may have entered an area where there is an
active broadcast signal on the station you are tuned to. Repeat the above
steps to find a different clear station.
Note: Press “CH” button to change frequencies on BTFREQ (1).
SECTION D
Reconnect to your Device
Transmitter Off: Once paired, the transmitter will automatically
reconnect when powered on.
Transmitter On: Reconnect – Tap Multi-Function Button (MFB) once (*)
*Note: Only tap MFB if the transmitter does not automatically reconnect.
SECTION E
Streaming Music
Stream music using the music player on your phone. You can use the controls on
the BTFREQ to control the music settings:
Play/Pause – Tap the MFB/K once
Track Forward-Turn MFB/K to the right
Track Back-Turn MFB/K to the left
Volume Up-Turn and hold MFB/K to the right
Volume Down-Tum and hold MFB/K to the left
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>