I-SHUNFA G9-LE Smart Wireless Dimmable G9 LED Bulb Lamp User Manual
- June 15, 2024
- I-SHUNFA
Table of Contents
I-SHUNFA G9-LE Smart Wireless Dimmable G9 LED Bulb Lamp
Specifications
- Model: G9-LED
- Type: Wireless LED Bulb
- Dimming: Stepless
- Control: Remote Control and Mobile App (Z-HOME)
- Color Temperature: Adjustable (Warm White, Natural White, Cool White)
Product Usage Instructions
Controller Introduction:
The wireless LED G9 Bulbs come with a remote control for easy operation.
Follow the steps below to set up the controller:
- Firstly, install the bulb and power on the lamp at the plug to check if it works. Then turn off the lamp at the plug.
- Pick a number from 1 to 4 for this lamp.
- Turn on the lamp at the plug after 10 seconds of it being off.
- Within 3 seconds, press the “Group Lights ON” button on the remote three times.
- The bulb will flash three times to indicate successful pairing.
- Repeat the above steps for other lamps, assigning them different numbers on the remote. Each number on the remote controls the specific lamp allocated to it.
Download and Install Z-HOME App:
To control the smart LED lights using your mobile device, download and
install the Z-HOME app by following these steps:
- For Android: Open the browser, scan the QR code provided in the manual to download the app. Alternatively, search for “Z-HOME” on the Google app store and download it.
- For iOS: Scan the QR code provided in the manual to download the app. Alternatively, search for “Z-HOME” on the app store and download it.
APP Operation:
Once you have installed the Z-HOME app, follow these steps to connect your
smart LED lights:
- Open the Z-HOME app.
- Make sure the Bluetooth function on your device is turned on.
- Install the G9 LED Bulb in the luminaire and turn on the switch to ensure the lights are on. Then switch off the switch.
- Select “Group 1” at the bottom of the app.
- Turn on the lamp at the plug after 10 seconds of it being off. On the group screen, click “Pair code” immediately upon turning the light back on.
- The bulb will flash three times to indicate successful pairing.
- To add another lamp to the same group, repeat steps 4-6. You can also create additional groups and add lamps to them.
- Use the Master page in the app to control all lamps in all groups simultaneously.
App Control Interface:
The Z-HOME app provides additional features and settings for convenient
control of your smart LED lights:
- Brightness Control: Adjust the brightness level using the – and + buttons.
- Color Temperature Control: Choose from Warm White, Natural White, and Cool White options.
- Night Light Mode: Activate or deactivate the night light feature.
- Pairing Key: Use the pairing key to pair or unpair the lights.
- Menu: Access the menu for device reset and other options.
- Add Group: Create a new group for organizing your lamps.
FAQ:
How do I unpair a lamp from the remote control?
To unpair a lamp from the remote control, follow these steps:
- Turn on the lamp at the plug.
- Within 3 seconds, press the “ALL Lights ON” button on the remote three times.
- The light bulb will flash three times, indicating successful unpairing.
Can I control individual lamps within a group?
Yes, you can control individual lamps within a group. Each lamp is assigned a
number on the remote control, and you can use the corresponding number button
to control that specific lamp.
What are the advantages of using the Z-HOME app over the remote control?
The Z-HOME app provides additional features such as organized settings and the
ability to control the lamps from another room. It offers a more convenient
and versatile way to interact with your smart LED lights.
Thanks for purchasing the wireless LED G9 Bulbs We hope that you’ve received your product(s)and enjoying the LED lamps
Read instructions
We focus on the development of new functional products and do not do a very
good job of explaining the use method. We hope you can pair install the
product according to the instructions and the following detailed operation
steps after receiving the product. We hope we can solve the problem for you.
Thank you for your support.
Controller introduction
Remote control :
- Firstly, you need to get your lamp, install the bulb, and power the lamp on at the plug to check it all works, then turn the lamp off at the plug.
- Pick a number from 1 to 4 for this lamp, then turn the lamp back on at the plug after 10 seconds of it being off.
- Once on, Within 3 seconds, press (Group Lights ON) again 3 times.
- The bulb will then flash 3 times to show it’s successfully paired.
- Do the same procedure with another lamp except allocate it a different number on the remote. Each number on the remote controls the specific lamp allocated to it.
Unpair :
Once on, Within 3 seconds, press (ALL Lights ON) again 3 times. Then the light
bulb will flash 3 times, indicating that the unpairing was successful.
Download and install the “Z-HOME” APP
- Android : Open the browser, scan the QR code to download the app., or search “Z-HOME” on the Google app store to download it.
- IOS : Scan the QR code to download the app or search”Z-HOME” on the app store and download it
How to Connect Smart LED Lights to the App
- The name of the APP is, “Z-HOME”. Download this app and open it.
- Need to turn on the Bluetooth function.
- Install the G9 LED bulb in the luminaire, turn the switch on, and make sure the luminaire lights up. Then switch off the switch.
- At the bottom, select “Group 1”.
- Then turn the lamp back on at the plug after 10 seconds of it being off. On the group screen, click “Pair code” immediately upon turning the light back on.
- The bulb will then flash 3 times to show it’s successfully paired.
Unpair :
Open the menu, select “Device Reset”
App control interface
With the app you get a few extra choices such as organized settings you can click on automatically without having to keep clicking on the remote to get to that setting. Not to mention you can control the lamps from another room which you can’t do with the remote.
If you are satisfied with our products, please leave your review on Amazon. If you have any questions about the product please contact us in the first instance.