sauermann KT120 Kistock Data Loggers User Guide

sauermann KT120 Kistock Data Loggers User Guide

Quick start guide

Operating temperature, protection of the instruments and information about storage and the battery

• Operating temperature*: KT120: from -40 to +70 °C; KH120: from -20 to +70 °C
• KT120: IP65; KH120: IP20
• Storage temperature: from -40 to +85 °C

Battery power supply: 1 x CR2450 (button battery*)

1. Display

DATASET is finished.
Indicates that one value is being recorded. It flashes: the DATASET did not start already.
Flashing slowly: DATASET is between 80 and 90% of the storage capacity.
Flashing quickly: DATASET is between 90 and 100% of the storage capacity.
Constant: storage capacity full.

The displayed values are the recorded maximum/minimum values for the displayed channels.
Indicates the alarm action
type: rising or falling action.
Constant: indicates that the batteries have
to be replaced.
Indicates the channel number which is measuring.
°C: Temperature in °Celsius
°F: Temperature in °Fahrenheit
%RH: Relative humidity (KH 120)

1.  **Dimensions (mm)  

* The battery must be in compliance with the IEC 60086-4 standard.

1. 1.  **Connections**  

   PC connection input

2. Recorder fuction
   The KISTOCK allows to record the values measured instantaneously, it records the values according to a predefined interval.
   On the other hand, it is possible to operate continuously the KISTOCK thanks to a loop recording.
   3 types of dataset start
   The measurement dataset can be launched:
   • With a delayed start (with predefined date and time)
   • With the software
   • With push-button
   6 types of dataset stop
   You can stop your dataset:
   • According to a date and time (if it was started the same way)
   • According to a recording duration
   • According to a predefined number of recording points
   • If the storage capacity of the memory is full
   • With “Stop” option of the software
   • By holding “OK” key during about 5 seconds, if this function has been previously activated by the software.

3. 1. Mounting
      The KISTOCK data loggers have a magnetic mounting, so you can fix it easily.
      1. Magnetic mounting
      2. Battery cover
      3. Locking sign of the battery cover

4. Replace the battery
   With 500 days to 3 years* of battery life, KISTOCK devices guarantee long-term measurements.
   To replace the battery:
   • Unlock the battery cover.
   • Insert the battery (CR 2450 button battery*) with the + pole visible.
   • Replace the battery cover with the indicator in front of the opened padlock and close it by turning it towards the right in order to make correspond the indicator with the closed padlock.
   On the basis of 1 measurement each 15 minutes at 25 °C.
   **The battery must be in compliance with the IEC 60086-4 standard.

5. Accessorios
   Consulte la ficha técnica para obtener más información sobre los accesorios disponibles.

Mantenimiento: evitar disolventes agresivos. Proteger el instrumento cuando se limpie con formol la superficie donde esté instalado (salas limpias, conductos…).
Download the data sheet

Read More About This Manual & Download PDF:

References

• Services - Homepage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>