VonHaus 3500227 Corded Lawn Mower Instruction Manual

3500227 Corded Lawn Mower
Instruction Manual

3500227 Corded Lawn Mower

Please read all instructions carefully before use and retain them for future reference.

INTENDED USE Only operates the power tool/machine for its intended purpose and within the parameters specified in this manual.
This power tool/machine is for domestic use only. This power tool/machine is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless supervised or given appropriate instruction concerning the product’s use by a person responsible for their safety.

GENERAL PRECAUTION Do not allow it to be used as a toy. Children should be supervised to ensure they do not play with the power tool/machine.
If the power tool/machine is not functioning properly, has been dropped, damaged, left outdoors, or immersed in liquid, do not use it, contact DOMU Brands Customer Services.
Do not use the power tool/machine if any parts appear to be faulty, missing, or damaged.
Ensure all parts are securely attached before use.

RISK OF PERSONAL INJURY Avoids body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the off position before connecting to the power source and/or battery pack, picking up, or carrying the tool. Carrying power tools with your finger on the switch, or energizing power tools that are switched on invites accidents.
Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite dust or fumes.
Always wear eye protection. Any power tool can throw foreign objects into your eyes and cause permanent eye damage. Always wear safety goggles (not glasses) that comply with ANSI safety standard Z87.1. Everyday glasses have only impact-resistant lenses.
Do not expose power tools to rain or wet conditions.
Water entering the power tools will increase the risk of electric shock.
Stay alert, watch what you are doing, and use common sense when operating a power tool/machine. Do not use a power tool/machine while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating a power tool/machine may result in serious personal injury.
Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch is in the off- position before connecting to a power source and/or battery pack, picking up, or carrying the tool.
Carrying a power tool/machine with your finger on the switch or energizing a power tool/machine that has the switch on invites accidents.
Remove any adjusting key or spanner before turning the power tool/machine on. A spanner or a key left attached to a rotating part of the power tool/machine may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool/ machine in unexpected situations.
Dress appropriately. Do not wear loose clothing or jewelry.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.

WORK AREA SAFETY Keep the work area clean and well-lit.
Cluttered or dark areas invite accidents.
Do not operate power tools/machines in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Power tools/machines create sparks that may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool/machine. Distractions can cause you to lose control.

GENERAL POWER TOOL USE AND CARE Do not force the power tool/machine. Use the correct power tool/machine for your application. The correct power
tool/machine will do the job better and safer at the rate for which it was designed.
Do not use the power tool/machine if the switch does not turn it on and off. Any power tool/machine that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the power tool/machine before making any adjustments, changing accessories, or storing power tool/machine tools. Such preventive safety measures reduce the risk of starting the power tool/machine accidentally.
Store idle power tools/machines out of the reach of children and do not allow persons unfamiliar with the power tool/ machine or these instructions to operate the power tool/ machine.
Power tools/machines are dangerous in the hands of untrained users. Maintain power tools/machines. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool/machine’s operation. If damaged, have the power tool/machines repaired before use. Many accidents are caused by poorly maintained power tools/machines. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool/machine accessories and tool bits in accordance with these instructions, taking into account the working conditions and the work to be performed.
Use of the power tool/machine for operations different from those intended could result in a hazardous situation.

CLEANING & MAINTENANCE Never soak or immerse electrical components and or a component that has a plug attached.

Disconnect the plug from the power source before making any adjustments, changing accessories, or storing. Such preventive safety measures reduce the risk of starting the power tool accidentally. Ensure the motor has fully stopped before cleaning, clearing a blockage, checking, or carrying out any maintenance on the tool. Maintain your power tool. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired by a qualified repair person before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Regularly check external nuts and fixings to ensure vibration caused by normal use has not begun to loosen them. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the Breaker. Locate the power tool out of reach of children, in a dry, locked unit. Make sure that the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Remove the plug from the main socket/battery (where applicable) before carrying out any adjustment or maintenance. Always store the power tool/machine in a dry place. If the power cord is damaged, it must be replaced by a qualified service technician. Keep the ventilation slots and motor housing as free of dirt and dust as possible (where applicable). Clean the power tool/machine by rubbing it with a clean cloth and blowing it clean using low-pressure compressed air is recommended. Ensure you have all the pieces listed. If you are missing any components, contact our customer services department at support@domu.co.uk DO NOT proceed with assembly if any components are missing.

LAWNMOWERS
Do not expose the Lawnmower to rain or wet conditions. Water entering the Lawnmower will increase the risk of electric shock.
Always check the area to be worked on for wire and other debris that could cause potential damage to the Lawnmower and injury to the operator.
Always wear substantial footwear and long trousers whilst operating the Lawnmower. Never operate the Lawnmower without the Grass Catcher in place, unless otherwise specified in this manual. Keep children, pets, and bystanders away whilst operating the Lawnmower. Distractions can cause you to lose control. Switch on the motor carefully according to instructions and with feet well away from the blade.
Do not start the Lawnmower whilst standing in front of the discharge opening. Keep clear of the discharge opening at all times. Do not use the Lawnmower if the switch does not turn it on and off. Any garden tool that cannot be controlled with the switch is dangerous and must be repaired. Do not tilt the Lawnmower when switching on the motor, except for if the machine has to be tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part which is away from the operator. Always keep your arms and legs a safe distance from the cutting mechanism, particularly after turning the appliance on.
Do not put hands or feet near or under rotating parts. Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Walk, never run. Do not overreach. Keep proper footing and balance at all times. Always be sure of your footing on slopes. Always mow across the face of slopes, never up or down. Do not mow excessively steep slopes. Exercise extreme caution when changing direction on slopes.
Use extreme caution when reversing or pulling the Lawnmower towards you. Do not transport the Lawnmower whilst the power source is running. If the Lawnmower has to be tilted when transporting it between areas, stop the blade before attempting to move it. The same applies when crossing

DECLARATION OF CONFORMITY

We
DOMU Brands Ltd
5th Floor The Tower
Deva City Office Park
Manchester
M3 7BF

DOMU Brands Ltd
Unit 30, Finlan Road
Stakehill Industrial Estate
Middleton, Manchester
M24 2RW

Declare under our sole responsibility the product:

SKU
3500227
Description
1200W Corded Lawn Mower

Complies with the essential requirements of the following directives:

2006/42/EC
2000/14/EC
2014/30/EU
2011/65/EU

And the Standards

BS EN 60335-1:2012+A13:2017 , BS EN 60335-2-77:2010, BS EN 62233:2008, EN 55014-1:2006+A1+A2
EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013

Authorized Signatory on behalf of DOMU Brands Ltd.

COMPONENTS

ASSEMBLY

Push together the clips into the recess on the basket starting from the back and working towards the front.

OPERATION

NOTE! If you wish to collect the grass in the Collection Basket, ensure the Mulching Accessory is removed first.

Allowing the grass cuttings to lay on the surface of the lawn can be beneficial and act as natural food.
Remove the Collection Basket and fit the mulching attachment into its location as shown, this will deflect the clippings downwards.
Set the mower to the highest cutting height when mowing on uneven ground or in tall weeds.

NOTE: Release the switch to turn the mower off when crossing any graveled area (stones can be thrown by the blade).

For effective mulching, do not cut wet grass, because it tends to stick to the underside of the deck, preventing proper mulching of grass clippings. New or thick grass may require a narrower cut.

The ground speed should be adjusted to the condition of the lawn.
If the grass is longer than 4″ (10 cm), mow the lawn twice in order to reduce the grass height to a maximum of 3 ¼” (8.3 cm).

Walk at a steady pace. Overlap the cutting rows. Do not let the grass get too tall. If the grass gets too long, start at the highest cutting position and work down to the desired cutting height.

Protect your hands.

While wearing gloves, wedge a block of wood between the blade and the mower deck in order to prevent the blade from turning when the nut is being removed.
Using a 12mm wrench or socket, loosen the blade nut and remove the blade.
Turn the nut anticlockwise to loosen it and clockwise to tighten, remove the blade.
To re-install the blade, position the blade with the cutting edges toward the ground making sure that the 2 holes locate with the 2 protrusions on the plastic insulator section.
Assemble the blade nut and the insulator section as shown below. Using a 12mm socket or wrench, turn the blade nut clockwise to secure the blade.

DISPOSAL INFORMATION Please recycle where facilities exist. Check with your local authority for recycling advice.

CUSTOMER SERVICE If you are having difficulty using this product and require support, please contact support@domu.co.uk

WARRANTY To register your product and find out if you qualify for a free extended warranty please go to www.vonhaus.com/warranty. Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated on the warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty. Returned goods will not be accepted unless re-packaged in their original packaging and accompanied by a relevant and completed returns form. This does not affect your statutory rights. No rights are given under this warranty to a person acquiring the appliance second-hand or for commercial or communal use.

COPYRIGHT All material in this instruction manual is copyrighted by DOMU Brands. Any unauthorized use may violate worldwide copyright, trademark, and other laws.

THANK YOU
Thank you for purchasing your product/appliance.
Should you require further assistance with your purchase, you can contact us at support@domu.co.uk VonHaus is a registered trademark of DOMU Brands Ltd. Made in China  for DOMU Brands. M24 2RW.

References

• Find information on our 2 year warranty policy | VonHaus

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>