august AKR3 Smart Keypad 2 User Guide
- June 15, 2024
- August
Table of Contents
august AKR3 Smart Keypad 2
Specifications
- Model : August Smart Keypad 2
- FCC ID: 2AB6U AKR3
- IC ID : 12163A AKR3
Product Information
- The August Smart Keypad 2 is a smart lock accessory that allows you to conveniently control access to your home. It works with your existing August smart lock and can be easily set up using the August App.
Installation Requirements
- Before beginning the setup process, make sure you have already installed your smart lock. If you haven’t, please refer to the smart lock installation instructions provided separately.
August App Setup
To set up the August Smart Keypad 2, follow these steps:
- Download the August App from your app store and install it on your smartphone or tablet.
- If you are already an August user, open the August app and select “Set Up Device” from the menu.
- Choose “Set Up Device” from the menu and follow the on-screen instructions.
- In the app, scan the QR code provided when prompted.
Installation
| REV | DATE |
|---|---|
| 0 | 07/7/22 |
| 1 | 02/03/23 |
| 2 | 02/28/23 |
EXTERIOR
DRAWING NAME
Artwork, Quick Start Guide Card ,Pandora ,August Base
DRAWING NO.
- 085-00969
DEFAULT TOLERANCES
- Decimal .X ± .25 XX ± .1
Unless otherwise specified, dimensions are in mm.
COLOR MATCH
Pantone 116 C
COLOR MATCH
Pantone 1788 C
DRAWING BY
- Gregory Mack
DATE
- 02/03/2023
INTERIOR
| REV | DATE |
|---|---|
| 0 | 07/07/2023 |
| 1 | 08/01/2023 |
| 2 | –/–/– |
| 3 | –/–/– |
174mm
- Graphik, Medium, 6pt
- Graphik, Regular, 6pt
58mm
- August Smart Keypad 2
- Model: AK°R3
- FCC ID: 2AB6U°AKR3
- IC ID: 12163A°AKR3
Caution
- The user is cautioned that changes or not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This device complies with Part 15 of the FCC Rules and Industry Canada licenceexempt RSS standard(s).
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o˛ and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit deferent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Do not dispose of a battery into ˜ire or a hot oven, or mechanically crushing
or cutting of a battery, that can result in an explosion; Do not leave a
battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of ˜lammable liquid or gas.
Do not expose the battery to extremely low air pressure that may result in an
explosion or the leakage of Flammable liquid or gas
FCC& IC Radiation Exposure Statement
- This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Graphik, Light, 4pt