LINDY 42679 60m 4 Port USB 2.0 Cat.6 Extender User Manual
- June 15, 2024
- LINDY
Table of Contents
LINDY 42679 60m 4 Port USB 2.0 Cat.6 Extender
Specifications
- Model: 60m 4 Port USB 2.0 Cat.6 Extender
- Product Number: 42679
- Website: lindy.com
- Warranty: LINDY 2 year warranty
- Technical Support: Free lifetime technical support
Introduction
Thank you for purchasing the 60m USB 2.0 Cat.6 Extender, 4 Port.
This product has been designed to provide trouble-free, reliable operation. It
enables a USB 2.0 host device to send data up to 60 meters. The receiver unit
has an integrated 4-port hub for connection of multiple USB peripherals.
Package Contents
The package includes:
- 1 x Transmitter
- 1 x Receiver
- 1 x 5VDC 4A Power Adapter
Features
- Extends USB 2.0 connections up to 60 meters
- Integrated 4-port hub on the receiver unit
Installation
To install the USB 2.0 Cat.6 Extender, follow these steps:
- Connect the Transmitter to a USB port on the host computer.
- Place the Receiver near the USB device(s) in the desired remote location.
- Connect the supplied 5VDC 4A power adapter to the Receiver.
- Connect the Transmitter and Receiver using a Cat.5e/6 (or better) cable (not included).
FAQ
Q: Can I use this extender with USB 3.0 devices?
A: No, this extender is designed for USB 2.0 connections only.
Q: Is the Cat.5e/6 cable included in the package?
A: No, the Cat.5e/6 cable is not included. You will need to purchase it
separately.
Q: Can I use multiple extenders in a daisy-chain configuration?
A: No, daisy-chaining multiple extenders is not supported.
60m 4 Port USB 2.0 Cat.6 Extender
Safety Instructions
WARNING!
Please read the following safety information carefully and always keep this
document with the product.
Failure to follow these precautions can result in serious injuries or death
from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock,
which may result in death.
This device is a switching type power supply and can work with supply voltages
in the range 100 – 240 VAC For worldwide usability four different AC adapters
are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand
type. Use the appropriate AC adapter as shown in the picture and ensure it is
firmly secured in place and does not detach by pulling before installing into
a power socket.
To reduce risk of fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Introduction
Thank you for purchasing the 60m USB 2.0 Cat.6 Extender, 4 Port. This product
has been designed to provide trouble free, reliable operation. It benefits
from both a LINDY 2 year warranty and free lifetime technical support. To
ensure correct use, please read this manual carefully and retain it for future
reference.
This USB 2.0 Cat.6 Extender is composed of a Transmitter and Receiver. It
enables a USB 2.0 host device to send data up to 60 metres. The receiver unit
has an integrated 4 port hub for connection of multiple USB peripherals.
Package Contents
- Transmitter Unit with fixed 12cm USB A male cable
- Receiver Unit
- 5V DC 4A Multi-Country Power Supply (with UK, Euro, US, AUS plug) for Receiver
- This Manual
Features
- Supports USB 2.0 High Speed devices up to 480Mbps, backwards compatible with USB 1.1
- Plug and play, no driver installation required
- Extends USB 2.0 high-speed and USB 1.1 devices up to 60m over Cat 5e/6 (or better) cable
- Integrated four port hub
- Supports all major operating systems with USB support
Specification
- Transmitter with 1x USB 2.0 A male port and 1x RJ45 female port
- Receiver with 1x RJ45 female port, 4x USB 2.0 A female ports, DC power socket (3.5/1.35mm)
- LEDs: white for power, green for link / RJ45 connection
- Dimensions: 52x60x23mm (2.05×2.36×0.91in) each
- Operating Temperature: -10 – 60°C (14°F – 140°F)
- Storage Temperature: -20 – 70°C (-4°F – 158°F)
Installation
- Connect the Transmitter to a USB port on the host computer.
- Place the Receiver near the USB device(s) in the desired remote location.
- Connect the supplied 5VDC 4A power adapter to the Receiver.
- Connect the Transmitter and Receiver by using a Cat.5e/6 (or better) cable (not included)
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
Recycling Information
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.
Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com, T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England sales@lindy.co.uk, T: +44 (0)1642 754000
Tested to comply with FCC standards.
For home and office use.
No. 42679
3rd Edition, August 2023
lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>