morel Hybrid 42 Car Audio Speaker Installation Guide

: June 15, 2024
: Morel

Table of Contents

morel Hybrid 42 Car Audio Speaker
Product Information
Product Usage Instructions
Hybrid Components
Hybrid Woofer/Integra, Tweeter, Crossover mounting
2-WAY System
3-WAY System
Integra System
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

morel Hybrid 42 Car Audio Speaker

morel-Hybrid-42-Car-Audio-Speaker-product

Product Information

Specifications

Driver Unit:
- Hybrid MW4MKII
- Hybrid MW5MKII
- Hybrid MW6MKII
- Hybrid Integra 42
- Hybrid Integra 52
- Hybrid Integra 62
Tweeter/Midrange: MT300/CDM700
Crossover:
- MXR240.4
- MXR250.4i
- MXR300.4

Product Usage Instructions

Hybrid Woofer/Integra, Tweeter, Crossover Mounting
To mount the Hybrid Woofer/Integra, Tweeter, and Crossover, follow these steps:

For flush mounting, use the provided screw clips. They can be used with or without the plastic frame.
For surface mounting, follow the provided instructions and use the numbered steps:
- Click the surface mount into place.
- Insert the Hybrid Woofer/Integra, Tweeter, and Crossover into the surface mount.
- Secure the components in place.

2-Way System
To set up a 2-Way System, follow these steps:

Wiring:
- Connect the Tweeter to the Highpass output.
- Connect the Woofer to the Lowpass output.
Recommended Active Crossovers:
- Tweeter HP: 2,500Hz @ 12dB or 24dB slope
- Woofer LP: 2,500Hz @ 12dB or 24dB slope

Passive Set Up for 2-Way System
To set up a passive 2-Way System, follow these steps:

Connect the Tweeter IN to the Tweeter input.
Connect the Woofer IN to the Woofer input.

2-Way System Alignment
To align a 2-Way System, use the red jumper to determine the tweeter +/- dB level.

3-Way System
To set up a 3-Way System, follow these steps:

Wiring:
- Connect the Tweeter to the Highpass output.
- Connect the Midrange to the Bandpass output.
- Connect the Woofer to the Lowpass output.
Recommended Active Crossovers:
- Tweeter HP: 2,500Hz @ 12dB slope
- Midrange LP: 2,500Hz @ 12dB slope
- Midrange HP: 500Hz @ 12dB slope
- Woofer LP: 500Hz @ 12dB slope

Passive Set Up for 3-Way System
To set up a passive 3-Way System, follow these steps:

Connect the Tweeter to the Tweeter input.
Connect the Midrange to the Midrange input.
Connect the Woofer to the Woofer input.

3-Way System Alignment
To align a 3-way System, use the red jumper to determine the tweeter +/- dB level.

Hybrid Integra System
To set up a Hybrid Integra System, follow these steps:

Wiring:
- Connect the Tweeter to the Highpass output.
- Connect the Woofer to the Lowpass output.
Recommended Active Crossovers:
- Tweeter HP: 2,500Hz @ 12dB or 24dB slope
- Woofer LP: 2,500Hz @ 12dB or 24dB slope

Passive Set-Up for Hybrid Integra System
To set up a passive Hybrid Integra System, follow these steps:

* Connect the Tweeter to the Tweeter input.

Connect the Woofer to the Woofer input.

Hybrid Integra System Alignment
To align a Hybrid Integra System, use the red jumper to determine the tweeter +/- dB level.

Frequently Asked Questions

Where can I contact Morel for support?

You can contact Morel support at:

```
* Website: [www.morelhifi.com](http://www.morelhifi.com)
```
- Email: info@morelhifi.com
- Phone: +972-8-9301161 (Morel), 1-877-667-3511 (Morel America)

Fax : +972-8-9301312 (Morel), 1-718-721-1560 (Morel America)

What is the warranty period for the Hybrid speaker system?
Please refer to the warranty information provided by your Morel dealer or visit the Morel website for details.

Dear Customer,
Thank you for choosing Morel for your car audio speaker solution. Morel prides itself on engineering and producing the best high-fidelity speaker systems. We hope you enjoy your Hybrid speakers for years to come. If you have any questions, please contact your Morel dealer or Morel support at www.morelhifi.com

Hybrid Components

Hybrid 4″, 5.25″, 6.5″ Woofer

$morel-Hybrid-42-Car-Audio-Speaker-fig- $1$$

Hybrid 4″, 5.25″, 6.5″ Integra

MT300 Tweeter

CDM700 Midrange

MXR240.4/250.41/300.4

Hybrid Woofer/Integra, Tweeter, Crossover mounting

Unit 4″, 5.25″, 6.5″

Crossover mounting

MT300 Tweeter

Flush Mount
Surface Mount

CDM700 Midrange
Use the screw clips in any combination, with or without the plastic frame. These clips can be used either way up or down depending on installation requirements.