morel IP-BMW Series Speaker Installation Guide

June 9, 2024
Morel

morel-logo

morel IP-BMW Series Speaker

Installation Guide

  • BMW
  • IP-BMW42, IP-BMW42-CTR,
  • IP-BMW4C,IP-BMW4C-CTR
  • IP-BMW-SUB82

Dear Customer,
Thank you for choosing Morel for your car audio speaker solution.
Morel prides itself on engineering and producing the best high-fidelity speaker systems. We hope you enjoy your Integration Performance speakers for years to come.
If you have any questions, please contact your Morel dealer or Morel support at: www.morelhifi.com

Components

Component System

Coax System

Subwoofer

Installation tools

Component Woofer and Coax Adapter Assembly

Assembly Overview

morel-IP-BMW-Series-Speaker-6

Scan for vehicle-specific compatibility information

Configuration A

Configuration C

Configuration B

Configuration D

Speaker Connection

IP-BMW42 Component System

morel-IP-BMW-Series-Speaker-11

2 WAY System – Car integration set up wiring

Woofer and Tweeter Installation

4″ Trim Installation

morel-IP-BMW-Series-Speaker-13

4″ Center Deck Installation

morel-IP-BMW-Series-Speaker-14

4″ Door Installation

morel-IP-BMW-Series-Speaker-15

Tweeter Center / Rear Deck Installation

morel-IP-BMW-Series-Speaker-16

Woofer, Tweeter and Subwoofer Installation

Tweeter – Front Installation

morel-IP-BMW-Series-Speaker-17

Subwoofer – Under Seat Installation

Specifications

WOOFERS IP-BMW42 IP-BMW4C IP-BMWSUB82 TWEETERS IP-BMW42 IP-BMW4C
Nominal Impedance (ohm) 4 4 2 Nominal Impedance (ohm) 4 4
Power Handling Wrms 50 40 180 Power Handling Wrms 90 60
Max. Trans. Pwr Handling Wrms 120 120 500 Max. Trans. Pwr Handling Wrms
(10ms) 180 120
Sensitivity (2.83 V/1M) dB 89 89 84 Sensitivity (2.83 V/1M) dB 90.5dB

86dB
Frequency response Hz| 80-20000| 80-5000| 20-1000| | Frequency Response Hz| 1800-22000| 2200-20000
Resonant Freq. Fs Hz| 110| 110| 30| | Resonant Freq. Fs Hz| 1000| 1400
Voice Coil Diameter mm (inch)| 25 (1)| 25 (1)| 54 (2.1)| | Voice Coil Diameter mm (inch)| 28 (1.1)| 19 (1)
DC Resistance (ohm)| 3.65| 3.65| 2.2| | Voice Coil Wire| Copper| Copper
Magnet System| Hybrid Neodymium

+ Ferrite

| Hybrid Neodymium

+ Ferrite

| Neodymium| | Magnet System| Neodymium| Neodymium
| | | | | Mounting Depth mm (inch)| 20 (0.8)|
HE-Magnetic Gap Height mm (inch)| | | 5 (0.20)|
B-Flux Density (T)| 0.94| 0.66| 0.75|
BL Product/BXL| 3| 3.15| 5.4| CROSSOVERS IP-BMW42 Tweeter
Suspension Compliance CMS – mm/N| 0.37| 0.37| 0.46|
Electrical Q Factor QES| 1.47| 1.32| 0.83|
QTS| 0.9| 0.9| 0.57|
QMS| 3.27| 3.4| 1.84|
Mech. Resistance RMS- N . S / M| 1.11| 1.06| 6.1|
Moving Mass MMS – gr/ounce| 4.92(0.17)| 4.84(0.17)| 60 (2.11)|
Equiv. Can Air Load VAS – L (cu.ft3)| 1.47(0.05)| 1.19 (0.04)| 42 (1.48)|
Effective Piston Area SD sq.cm (sq.inch)| 53(20.8)| 48 (18.9)| 254(100)|
Cone Material| pp| pp| paper composite|
Unit Diameter mm(inch)| 96.7 (3.8)| 96.7 (3.8)| 8” BMW FIT|
Mounting Depth mm (inch)| 36.7 (14.4)| 36.7 (14.4)| 43.5 (17.1)|
Mounting Cutout| 92 (3.6)| 92 (3.6)| 192 (7.55)|
Net Weight Kg (lb)| 0.35 (0.77)| 0.37 (0.81)| 1.12 (247)|

Morel operates a policy of continuous products design improvement, consequently specifications are subject to alteration without prior notice

Morel, Ness Ziona, 70400 Israel. Tel: +972-8-9301161
Fax: +972-8-9301312
E-mail: info@morelhifi.com

Morel America, Chandler, AZ, USA
Toll free number:1-877-667-3511
Fax: 1-718-721-1560
E-mail: info@morelamerica.com

www.morelhifi.com

Scan for vehicle-specific compatibility information

The IP-BMWSUB82 subwoofers are the ideal way to improve the bass in your BMW. The ultra slim 8-inch (200mm) subwoofer delivers accurate, powerful bass thanks to Morel’s innovative EVC™ motor topology with a powerful neodymium magnet and large 2-inch voice coil. Using our DirectFit design, the BMW- specific chassis and plug-and-play connectors make for quick and easy installation into all BMW models with under-seat subwoofers.
The IP-BMWSUB82 subwoofer was designed with a 2-ohm impedance making it highly efficient when used with OEM ampli-fication. Yet, its robust design allows you to achieve best results with higher power aftermarket amplification.

Key advantages

  • Direct Fit for easy installation
  • No need for any modification
  • Optimized for BMW to deliver HiFi quality sound
  • Plug and Play wire connection
  • All mounting hardware is included for ALL BMW models
  • Installation tools included

Specifications|
---|---
Configuration| Subwoofer
Woofer Size| 8″ (200mm)
Tweeter| N/A
Nominal Impedance (ohm)| 2
Nom. Power Handling (Wrms)| 180
Max Power Handling (W)| 500
Sensitivity (2.83 V/1M) dB| 84
Frequency Response (Hz)| 20-1000

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals