Morel MW6 Virtus Nano Carbon Instruction Manual

June 9, 2024
Morel

Morel logo MW6 Virtus Nano Carbon
Instruction ManualMorel MW6 Virtus Nano Carbon

MW6 Virtus Nano Carbon

Virtus Nano Carbon
42, 62 ,63
Virtus Nano Carbon Integra
42, 62
Components
MM2, MW6, MXR200.4, MXR130, MXR250.4i MT120N
Dear Customer,
Thank you for choosing Morel for your car audio speaker solution.
Morel prides itself on engineering and producing the best high-fidelity speaker systems.
We hope you enjoy your Virtus Nano Carbon speakers for years to come.
If you have any questions, please contact your Morel dealer or Morel support at: www.morelhifi.comMorel MW6 Virtus Nano
Carbon - Figure

Virtus Nano Carbon

4″, 6.5″ Woofer / Integra|
---|---
MT120N Tweeter (in 2-WAY / 3-WAY)| Morel MW6 Virtus Nano Carbon - MT120N
Tweeter
MXR 200.4/250.4i Crossover|
MXR 130 Crossover|
MM2 Midrange|

Midrange, Woofer and Tweeter mounting

4″, 6.5″ Woofer / Integra MM2

Morel MW6 Virtus Nano Carbon - Woofer or Integra|
MT120N| Crossover mounting
Morel MW6 Virtus Nano Carbon - MT120N| Morel MW6
Virtus Nano Carbon - Crossover mounting

Tweeter, Crossover Mounting

2-WAY System Wiring
ACTIVE SET UP (Outputs must be filtered)

  • 4-Channel amplifier with active crossovers required
  • Tweeter HP: 2,500Hz @ 12dB or 24dB slope
  • Woofer LP: 2,500Hz @ 12dB or 24dB slope

2-WAY System AlignmentMorel MW6 Virtus Nano Carbon - System
Alignment PASSIVE SET UP

Crossover

3-WAY System Wiring
ACTIVE SET UP (Outputs must be filtered)Morel MW6 Virtus Nano Carbon - ACTIVE
SET UP

  • 6-Channel amplifier with active crossovers required
  • 3-Way Component Systems
  • Tweeter HP: 2,500Hz @ 12dB slope
  • Midrange LP: 2,500Hz @ 12dB slope
  • Midrange HP: 500Hz @ 12dB slope
  • Woofer LP: 500Hz @ 12dB slope

PASSIVE SET UPMorel MW6 Virtus Nano Carbon - PASSIVE SET UP
2 3-WAY System AlignmentMorel MW6 Virtus Nano
Carbon - System Alignment Integra System wiring
ACTIVE SET UPMorel MW6 Virtus Nano Carbon - Integra System
wiring

  • 4-Channel amplifier with active crossovers required
  • Tweeter HP: 2,500Hz @ 12dB slope
  • Woofer LP: 2,500Hz @ 12dB slope

PASSIVE SET UPMorel MW6 Virtus Nano Carbon - Integra System wiring
2 Integra System aligmentMorel MW6
Virtus Nano Carbon - Integra System aligment

Specifications

VIRTUS NANO CARBON| MW4| HexatechTM Aluminium| INTEGRA 4| INTEGRA 6
---|---|---|---|---
Nominal Impendance (ohm)| 4| 4| 4| 4
Power Handling Wrms| 90| 100| 80| 100
Max. Trans. Pwr Handling Wrms| 300| 300| 300| 300
Sensitivity (2.83 V/1M)| 88dB| 88dB| 87dB| 87dB
Frequency response Hz| 80-9200| 50-5500| 90-3800| 50-5500
Resonance Freq. Fs Hz| 95| 68| 105| 73
Voice Coil Diameter mm (inch)| 54 (2.16)| 54 (2.16)| 54 (2.16)| 54(2.16)
Voice Coil Height mm (inch)| 9 (0.35)| 9.5 (0.4)| 7.5 (0.3)| 7.5 (0.3)
Voice Coil Type/Former| Aluminium| Aluminium| Aluminium| Aluminium
Voice Coil Wire| HexatechTM| Hexatech™ Aluminium| Hexatech™ Aluminium| Hexatech™  aluminium
DC Resistance (ohm)| 3| 3| 3| 3
Voice Coil Induct. @1 kHz (mH)| 0.12| 0.17| 0.11| 0.17
Magnet System| Neodymium Vented| Neodymium Vented| Neodymium Vented| Neodymium Vented
HE-Magnetic Gap Height mm (inch)| 4 (0.16)| 4 (0.16)| 4 (0.16)| 4 (0.16)
BL Product/BXL| 4.68| 3.85| 3.87| 4.18
Max. Linear Ex./Xmax mm (inch)| ±3mm (0.12)| ±3mm (0.12)| ±1.75mm (0.07)| ±3mm (0.12)
Electrical Q Factor QES| 0.7| 0.97| 0.775| 0.97
QTS| 0.6| 0.65| 0.615| 0.73
QMS| 4.01| 3.57| 2.98| 3.4
Moving Mass MMS – gr/os| 8.57 (0.3)| 14 (0.49)| 5.84 (0.2)| 11.8 (0.41)
Equiv. Can Air Load VAS – L (cu.ft3)| 1.48 (0.05)| 11 (0.38)| 0.7 (0.02)| 7.5 (0.26)
Effective Piston Area SD sq.cm (sq.inch)| 57(8.8)| 139(21.545)| 35.5(5.5)| 116 (17.98)
Cone Type| Carbon Cone| Carbon Cone| Carbon Cone| Carbon Cone
Cone Material| Carbon + Foam Core| Carbon + Foam Core| Carbon + Foam Core| Carbon + Foam Core
Unit Diameter mm(inch)| 109 (4.3)| 167 (6.5)| 383| 167 (6.5)
Mounting Depth mm (inch)| 17(0.7)| 17(0.7)| 109 (4.3)| 17 (0.7)
Mounting Cutout| 93 (3.6)| 137(5.48)| 17(0.7)| 137 (5.48)
Net Weight gr| 376| 450| 93 (3.6)| 470
MIDRANGE / TWEETER| MM2| INTEGRA| MT120N
---|---|---|---
Nominal Impendance (ohm)| 4| 4| 8
Power Handling Wrms| 60| 90| 80
Max. Trans. Pwr Handling Wrms (10ms)| 100| 180| 250
FS Hz| 83| 90.5| 90
Sensitivity (2.83 V/1M) dB| 200-5000| 1800-20000| 1800-22000
Frequency Response Hz| 145| 1000| 1200
Voice Coil Diameter mm (inch)| 20 (0.78)| 28 (1.125)| 28 (1.125)
Voice Coil Former| Kapton| Copper| Aluminium
Voice Coil Wire| Copper| Neodymium| Copper
DC Resistance ohm| 3.2| 5.2| 5.2
Magnet System| Double Magnet Neodymium| Neodymium| Neodymium
Dome Type| Aluminium Formed Dome| Acuflex™ ahand coated soft dome| Acuflex™ hand coated soft dome
Dome Material| Aluminium Anodized| Silk| Silk
Unit Diameter mm(inch)| 76.7 (3)| | 43.00 (1.69)
Mounting Depth mm (inch)| 9.3 (0.37)| | 13.2 (0.52)
Mounting Cutout| 69 (2.7)| | 47.00 (2)
Net Weight gr| 70| | 0.07 (0.15)
CROSSOVERS| MXR200.4| MXR130| MXR250.4i
---|---|---|---
Crossover Point| 2200Hz/12dB/6dB| W: 800Hz/12dB
M: 800Hz/6dB 5000Hz/6dB
T: 5000Hz/6dB| 2200Hz/12dB
Crossover Controls| Tweeter +/- 2dB| Tweeter 0/+2dB| Tweeter +/- 2dB
Wiring Options| N/A| N/ A| N/A

Morel logo

Morel, Ness Ziona, 70400 Israel.
Tel: +972-8-9301161
Fax: +972-8-9301312
E-mail: info@morelhifi.com| Morel America, Chandler, AZ, USA
Toll free number:1-877-667-3511
Fax: 1-718-721-1560
E-mail: info@morelamerica.com
---|---

www.morelhifi.com

Documents / Resources

| Morel MW6 Virtus Nano Carbon [pdf] Instruction Manual
MW6 Virtus Nano Carbon, MW6, Virtus Nano Carbon, Nano Carbon, Carbon
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals