Bhphoto Video M3 Red and Blue Warning Light User Manual

Bhphoto Video M3 Red and Blue Warning Light

Product Information

Specifications :

• Module size: 80mm75mm40mm
• Weight: 70g
• Mounting ability: 1Kg MAX
• Power: 25W MAX
• Installation method: Non-destructive installation at the bottom, without modification to the aircraft
• Connection control: PSDK method
• Adaptable UAV: M3 industry version
• Lighting configuration: 10W red and blue flashing lights

Product Usage Instructions

Loading:
Ensure the pre-flight inspection is completed. Turn on the drone in the order of remote control first, then the drone. Check that the aircraft system and thrower are working properly. The DJI MAVIC3 main interface will display an icon confirming the correct recognition of the BK3 red and blue lights.

Operating Instructions:

1. Panel Description: Ensure proper functioning of the aircraft system and thrower. Press button 1 to release hook No. 1
2. Press button 2 to release hook No. 2.
3. Press both keys 1 and 2 to release hooks 1 and 2 continuously.
4. Red and Blue Lights: The two buttons control different flashing frequencies for red and blue lights.

Uninstall :
After completing the work, disconnect the PSDK cable and lift the left and right locks to remove the mounted object from the aircraft.

Frequently Asked Questions (FAQ):

• Q: Can the BK3 red and blue lights be used with other drone models?
  A: No, the BK3 lights are specifically designed for use with the DJI M3 industry version UAV.

• Q: How do I know if the lights are installed correctly?
  A: Upon correct installation, the DJI MAVIC3 main interface will display an icon indicating proper recognition of the BK3 red and blue lights.

QZ-BK3
Red & Blue Warning Light

User Manual
V1.0 2024.01

BK3 red and blue light

Introduction to BK3 red and blue lights
BK3 red and blue lights are special equipment for DJI M3. Its functions include red and blue flashing lights and a 2-stage thrower. The equipment adopts a lightweight design and a quick installation method. The mounted objects can be installed through hooks and straps. It is convenient and practical and can be used with other equipment to complete complex tasks. Its control method adopts industry-specific PSDK link control, which is safe and reliable.

Main technical parameters

modification to the aircraft
Connection control method| PSDK
Adaptable UAV| M3 industry version
Lighting configuration| 10W red and blue flashing lights

Instructions for use

Loading

1. Lift the left and right latches. Insert the airframe into the bottom of the aircraft and press the circular buttons on both sides. Make sure it is securely mounted on the aircraft.
2. Plug in the PSDK line and push the hook by hand to mount the throwing items. Or use the metal buckle of the strap to push the hook on, put in the bundled items, and tighten it by adjusting the position of the Velcro on the other side. Make sure it is stable before taking off. (PS: Manually turn the left lever to change the left mounted object. Turn the right lever to change the right mounted object. Do not press both levers at the same time)

 Operating Instructions

1. Panel description
   After completion of pre-flight inspection , turn on the drone in the order of remote control – drone . If the aircraft system and thrower are working properly .The following icon appears on the main interface of DJI MAVIC3, indicate that the drone has correctly recognized the red and blue lights of BK3

2. Press button 1 to release hook No. 1.

3. Press button 2 to release hook No. 2.

4. Press key 1 and 2 , release 1 and 2 continuously.

5. Red and blue lights: The two red and blue buttons represent different flashing frequency respectively.

Uninstall
When the work is completed, remove the PSDK cable and lift the left and right locks, remove the mounted object from the aircraft.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>