CHOICE RSL06-360-ARGB1 360mm CPU Integrated Water Cooling Radiator User Manual
- June 15, 2024
- CHOICE
Table of Contents
**CHOICE RSL06-360-ARGB1 360mm CPU Integrated Water Cooling Radiator User Manual
**
Components List
-
1 CPU Integrated Water Cooling Radiator
-
3 Fans
-
8 Case Screws
-
12 Fan Screws
-
4 INTEL Back Plate Fixing Nuts
-
1 INTEL Back Plate
-
4* Fixing Nuts
-
4 INTEL Double-ended Screw Bolts
-
4 AMD Double-ended Screw Bolts
-
2 INTEL Brackets
-
2 AMD Brackets
-
1 Adapter Cable
-
1’ARGB Controller
Assembly Instructions
-
Put the rubber pads into the supporting foots of the back plate and remove the fixing nuts from the screws.
-
Assemble the back plate on the back of the motherboard, and ensure that the fixing nuts stick out from the back of the motherboard to the front.
-
Install the INTEL bracket on the water cooling head and fasten it with the fixing nuts.
-
Fasten the water cooling head with the bracket assembled and the back plate by using the fixing nuts.
Assembly Instructions
-
Fix the INTEL double-ended screw bolts on the motherboard.
-
Assemble the INTEL bracket on the water cooling head and fix it with the fixing nuts.
-
Fasten the water cooling head with the bracket assembled and the INTEL bracket double-ended screw bolts by using the fixing nuts.
AMD Assembly Instructions
-
Take out the AMD assembly frame.
-
Fix the AMD double-ended screw bolts on the motherboard.
-
Assemble the AMD brackets on the water cooling head and fix it with the fixing nuts.
-
Fasten the water cooling head with the brackets assembled and the AMD double-ended screw bolts by using the fixing nuts.
Radiator Assembly Instructions
-
If the radiator is directly assembled inside the computer, please use the fan screws and washers to fix the fan and the radiator first. Then use the case screws and washers to fasten the radiator on the case.
-
If the radiator is directly assembled on the case of the computer, please assemble the fan with the fan screws and washers first. Then, assemble the radiator with the case screws and washers.
-
If the fan is assembled between the radiator and the case, please fix it with the fan screws and washers.
-
If the fan is assembled between the radiator and the base of the computer, please fix it with the fan screws and washers.
Connection
- Connect the power cable on the water cooling head with the 4-pin plug on the mother- board.
- Connect the adapter cable with the 4-pin plug on the motherboard, and then connect the power cable of the fan with the adapter cable.
- Connect the ARGB cable of one fan with the 3-pin plug on the motherboard, and the ARGB cable of another fan is connected in series with the power cable of the fan through the adapter cable.
Connect the ARGB cable of one fan to the 3-pin plug on the motherboard, and then connect the ARGB cables of the other two fans to the ARGB cable of this fan in series via the adapter cable. If there is no 3-pin plug on the motherboard, connect the ARGB cable of the fan to the 3-pin plug of the controller, and then connect the other end of the controller to the SATA power cable.
Contact
If you have any product issue,pls feel free to contact us via
sales001@swfoeraudio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>