joyami JCL02M Portable Induction Cooktop User Manual

joyami Smart Induction Cooker
Operation Manual

Please read this operation manual carefully before starting the product, and save it properly for future use.

Important Safeguards

Comply with the following safety precautions to ensure safe use and avoid injury and property loss.
Caution: Hot Surface! The surface will become hot during the use.
Do NOT touch it to prevent scald.
Precautions on Use

• Do not allow people with physical, cognitive, or mental disability or those lacking relevant knowledge or experience, including children, to operate the product.
• Do not allow children to approach, touch, play with, or use the product.

Restrictions on Use

• Do not place the product in an unbalanced or humid place or one close to a fire or heat source, but preferably at a distance of more than 30cm from them.
• Do not place the product near a device susceptible to electromagnetic interference.
• Do not use any non-professional pots to prevent the induction cooker from affecting its heating performance or creating dangers.
• ONLY use pots that are made of iron,flat at the bottom, and not less than 12cm within the heating zone of induction cooker.
• Make sure there is food or liquid in the pot to avoid dry heating before starting.
• Pay attention to preventing scald when a pot with metal handles is used.

Precautions on Electric Power

• Do not use a power supply other than AC 220V-240V to avoid fire or electric shock.
• When disconnecting the power plug, do not excessively pull the AC power cord to avoid electric shock or a fire caused by short circuit .
• Do not allow children to operate the product alone. Keep it out of reach of infants and young children to avoid the occurrence of electric shock, scald, and other accidents.
• Do not insert or pull out the power plug with wet hands to avoid electric shock or injury.
• Use an independent power socket with its ground wire and at a rated current above 10A.
• Do not operate the product through an external timer or an independent remote control system.
• If the power cord is damaged, it must be replaced by a professional from the manufacturer, its maintenance department, or similar department to avoid any danger.

Environment

• Steam and heat will cause damage, discoloration and deformation to walls and furniture, so please keep the rice cooker more than 30cm away from walls and furniture during use.
• Do not use the product directly on a metal table, to avoid the product against heating the metal table and causing a danger.
• Keep good ventilation to ensure smooth heat dissipation when using the product.

In Use

• Do not place and heat a sealed container or sealed food (such as cans and pressure cookers) directly on the induction cooker, to avoid unexpected expansion during heating.
• Ensure that the air inlet and vent outlet of the product remain unblocked. Do not cover them with foreign matter to avoid the product against overheating.
• Do not place metal objects, such as knives, forks, spoons, and lids, on the heating surface of the product in use, to avoid scald.
• o not place paper, aluminum foil, cloth or other articles on the heating surface of the product to avoid accidents.

After Use

• Regularly check the air inlet and vent outlet of the product to ensure that they are not blocked.
• The heating surface of the product may remain hot after use. Do not touch it to avoid scald.
• If the product is abnormal or has a fault, stop operating it immediately and disconnect the power plug. Send it to professional personnel for repair after it cools down.

Cleaning and Maintenance

• Before cleaning, make sure to disconnect the power plug from the power socket and wait until the product becomes cool.
• Do not immerse the induction cooker in water or spray water on it.
• Do not rinse the air inlet or vent outlet of the induction cooker directly with water. Prevent water and foreign matter from entering the product and ensure its cleanliness.
• Do not use steam cleaner or steel wool or other hard items to clean or scrub the product.
• Use soft rag immersed with a neutral detergent to wipe off oil on the heating surface of the induction cooker. Do not use bleach solution or corrosive liquid to clean it.
• Use soft dry rag, or a soft brush or a micro vacuum cleaner to wipe or blow the air inlet and vent outlet of the product, to clean off dust.
• After cleaning, use soft dry rag to wipe the surface of the induction cooker to dry it.
• When not using the product for a long time, disconnect the power plug from the power socket and protect it from moisture, dust and insects.

Other Precautions

• Do not allow the induction cooker to bear strong impact or heavy weight or sharp tools to avoid injury or failure.
• Warning: If there are cracks on the heating surface of the induction cooker, turn it off to avoid possible electric shock.
• Do not modify, dismantle, or repair the product by yourself, to avoid fire, electric shock or scald.
• If the induction cooker is abnormal or has a fault, stop operating it immediately to avoid fire, electric shock or scald.

Abnormality or Fault

• Abnormal over-temperature of the power cord or power plug during the use of the induction cooker.
• Smoke and a burning smell come out of the induction cooker.
• Part of the rice cooker cracks, looses or there is an abnormal noise.
• Other faults or abnormalities.

Thank you for purchasing and using joyami Induction Cooker.
joyami Induction Cooker is for home use ONLY.
The illustrations of product, components and user interface herein are all schematic diagrams for reference only.
Due to possible upgrades of the product, there may be differences between the actual product and the schematic diagram included herein.

Product Description

Operation Area

Note: The illustrations of product, components and user interface herein are all schematic diagrams for reference only.
Due to possible upgrades of the product, there may be differences between the actual product and the schematic diagram included herein.

About Use

Connect with Mijia App
This product works with Mijia app. Control your device, and interact it and other smart home devices with Mijia app.
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search “Mijia” in the app Store to download and install it.
Open Mijia app, tap “+” on the upper right, and then follow prompts to add your device.

https://home.mi.com/do/home.html?f=xz&p=6880

Note:  The version of Mijia app might have been updated, please follow the instructions based on the current app version.
Connect to Wi-Fi
joyami Induction Cooker automatically enters the waiting state for Wi-Fi connection after it is powered on for the first time. Please complete Wi-Fi settings in Mijia APP.

Reset Wi-Fi
Simultaneously press down the buttons “Timer” and “Function” for 5 sec to reset Wi-Fi. After a successful reset, the Wi-Fi icon blinks on the screen and joyami Induction Cooker becomes ready for access.

Status of Wi-Fi Icon

Operation Mode| Waiting to access to Wi-Fi| Accessing to Wi-Fi| Successful access to Wi-Fi
---|---|---|---
Status Display| | |

Note: When no access to Wi-Fi, the Wi-Fi icon is in a waiting state.
Start to Use
The product can be used fast after the power cord is connected.

1. Power on
   After the induction cooker is powered on, press down the “Main Rotary Knob” for 0.5 sec to start its standby status.
   Tip: Standby status means heating mode by default, so you can cook in this mode directly, without selecting another function.

2. Select a function
   Taking “Hot Pot” as an example, click the “Function” button, and then rotate the “Main Rotary Knob” leftwards or rightwards to choose the “Hot Pot” mode. Click the “Main Rotary Knob” to confirm, and then the induction cooker starts cooking.
   Tip: If you want to exit the functional selection, you can click the “Function” button again.

3. Adjust power
   Adjust power by rotating the “Main Rotary Knob” leftwards/rightwards during the cooking process.

4. Power off after cooking
   Bring the product into sleep by long pressing the “Main Rotary Knob” for 3 sec after cooking is completed.
   Tip: In any state, it may bring the induction cooker into sleep by long pressing the “main rotary knob” for 3 sec.

About Operation Area
OLED screen displays the current mode or status of joyami Induction Cooker.

1. Heating mode
   Screen Display| Operation Mode| Status Display
   ---|---|---
   | Heating mode| Heating Stages 0-99
2. Function mode
   Screen Display| Operation Mode| Status Display
   ---|---|---
   | Hot Pot| Current cooking function and power stage
   | Steam| Current cooking function and power stage
   | Soup| Current cooking function and power stage
   | Stir Fry| Current cooking function and power stage
   | Deep Fry| Current cooking function and power stage
3. Timer mode
   Screen Display| Operation Mode| Status Display
   ---|---|---
   | Timer mode| Time Countdown

Operating Guide

Heating mode
The default mode is heating mode and lasts for 1h, and its heating stage can be adjusted according to cooking requirements. Slowly rotate the “Main Rotary Knob” to adjust the heating power by every stage, and fast rotate the “Main Rotary Knob” to adjust the heating power by every 10 stages.

Function mode
Press down the “Function” button to enter the function mode, and rotate the “Main Rotary Knob” leftwards or rightwards to browse and select from the basic functions. With every rotation of the “Main Rotary Knob”, the menu switches cyclically in the order of “Hot Pot, Steam, Soup, Stir Fry, and Deep Fry”. Click the “Main Rotary Knob”, and then joyami Induction Cooker starts cooking according to the selected function.
Tip: Users can expand the functions of joyami Induction Cooker and adjust their order after logging on Mijia APP.

1. Hot Pot
   The default cooking duration is 2h for this mode. Adjust the heating stage of joyami Induction Cooker according to cooking requirements.
   (The start stage is Stage 99 by default.)

2. Steam
   The default cooking duration is 1h for this mode. Adjust the heating stage of joyami Induction Cooker according to cooking requirements.
   (The start stage is Stage 80 by default.)

3. Soup
   The default cooking duration is 2h for this mode. Adjust the heating stage of joyami Induction Cooker according to cooking requirements.
   (The start stage is Stage 60 by default.)

4. Stir Fry
   The default cooking duration is 1h for this mode. Adjust the heating stage of joyami Induction Cooker according to cooking  requirements.
   (The start stage is Stage 99 by default.)

5. Deep Fry
   The default cooking duration is 2h for this mode. Adjust the heating stage of joyami Induction Cooker according to cooking requirements.
   (The start stage is Stage 70 by default.)

Timer mode

1. Before timing, confirm whether the current mode of joyami
   Induction Cooker is correct. Select an appropriate mode, and then press the “Timer” button to enter the Timer mode.
   Tip: The timer function can also be used when joyami Induction Cooker is not in the heating state. After the timer countdown expires, the alarm clock will remind you and the cooker automatically enter the standby status. For timing in function mode, set the timer after joyami Induction Cooker enters the cooking state.

2. Rotate the “Main Rotary Knob” rightwards, set the countdown duration, and then click the “Main Rotary Knob” to start. Slowly rotate the “Main Rotary Knob” to adjust the duration by every 1min, and fast rotate the “Main Rotary Knob” to adjust the duration by every 10min.
   Tip: The maximum timer duration is 4 hours, and the timer countdown is displayed in the format of “00: 00 (hour: minute)” . After the timer countdown expires, joyami Induction Cooker stops heating and automatically enters the standby status.

Adjust power
Adjust heating power by rotating the “Main Rotary Knob” leftwards/rightwards in the heating state, and the adjustment ranges from Stage 0 to Stage 99.

Pause
Press down the “Main Rotary Knob” once to pause heating, and press it down again to recover heating at the power stage set previously.
Tip: If no follow-up operation is performed after joyami Induction Cooker is paused, it will automatically enter the sleep status after 10 minutes.

Daily Maintenance

Disconnect the power supply to ensure that joyami Induction Cooker has stopped running. DO NOT perform any following operations until it is cooled to prevent scald.

1. Clean surface
   Clean joyami Induction Cooker with soft rag dipped with neutral detergent after cooking to ensure the cooking effect and clean surface.

2. Clean air inlet/vent outlet
   Clean off dust from the air inlet/vent outlet with a soft brush or a micro vacuum cleaner, or gently wipe off dust with soft dry rag every half a year.

Basic Parameters
Product Name: Smart Induction Cooker
Product Model: JCL02M
Rated Power: 2100W
Rated Voltage: 220-240V~
Rated Frequency: 50-60Hz
Dimensions: 295×285×70mm(L×W×H)
Access to Wi-Fi: Wi-Fi IEEE 802.11b/g/n 2.4GHz
After-sale Service
Please visit the official website at http://tokitglobal.com ,if you need after-sales service or other information, or encounter any problem.

Fault Code

When the induction cooker has a fault during its operation, the OLED screen of the main rotary knob displays a fault code. Please refer to the following table for troubleshooting.

automatically after a pot/pan is placed
E-03 Abnormal voltage| High-voltage protection| Resume the program automatically once the voltage is normal
E-04 Abnormal voltage| Low-voltage protection| Resume the program automatically once the voltage is normal
E-05 Too high temperature| Bottom temperature sensor gives high temperature alarm| Resume the program automatically when the temperature drops
E-07 Too high temperature| IGBT gives high temperature alarm| Resume the program automatically when the temperature drops
E-08 Report for repair| IGBT is short circuited or open circuited, or fails| Contact after-sales service
E-10 Report for repair| Bottom sensor is short circuited or open circuited, or fails| Contact after-sales service
E-11 Report for repair| Communication is abnormal between the power supply board and the display board| Contact after-sales service
E-12 Report for repair| Coil panel is open circuited or not connected| Contact after-sales service

Troubleshooting

The induction cooker suddenly
stops heating during use.| Check if the ambient temperature is very high.
Check if the fuse is burnt or circuit breaker is tripped.| Check if the air inlet/vent outlet is blocked;
Check if the fan is rotating.
Check if the power socket is not energized.| The temperature has reached the preset value in temperature control status.
The temperature is unable to control during use.| Check if the pot bottom is uneven or sunken in the middle.| Safety protection of the induction cooker. Acknowledge the fault after waiting for several to 20 sec.
“No cooking ware” error is reported after working for 3 sec.| Check if the pot used is proper.| No access to Wi-Fi.| Check if APP is the latest version.
Check if the Wi-Fi intensity is strong enough at the position of the induction cooker.
Check if the pot is placed in the middle of the heating surface.| Firmware can’t be upgraded.| Check if the induction cooker is in cooking process.
Check if the diameter of pot bottom is more than 12cm.| Check if Wi-Fi connection is normal.

Manufacturer: Chunmi Technology (Shanghai) Co., Ltd.
Address: 1/F Tower 2, 60 Naxian Road, Pudong, Shanghai, China
Version：V1.6

Documents / Resources

| joyami JCL02M Portable Induction Cooktop [pdf] User Manual
JCL02M, JCL02M Portable Induction Cooktop, Portable Induction Cooktop, Induction Cooktop, Cooktop, JCL01M
---|---

References

• joyami

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>