NDakter Bike Chain Lock Instructions
- June 13, 2024
- NDakter
Table of Contents
NDakter Bike Chain Lock
The initial password of the lock is “00000”
- Open the lock with default passward “00000”
- Turn the knob forward 90 from the default position
- Turn the digital to set your new 11:11 passward
- Rotate the “REST” knob 90 to the original position
- Remember new password mill and scramble cipher bits
- Dial back new pwd and insert the lock tingue to complete
WARM TIPS
-
Only by setting the gear dial to the password that is currently in effect (the initial password is 00000, if you change it, it is the password set by yourself) you can turn the “RESET” knob to change the password.
-
You should set a password that can be remembered easily and write it down in your notebook or take a photo of it using your phone.
Note: Be sure to put your password from left to right as order is important. -
If you forget the password after the successful reset, you will not be able to open the lock!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>