fantech MK855 Maxfit108 RGB Productivity Mechanical Keyboard Instruction Manual

fantech MK855 Maxfit108 RGB Productivity Mechanical Keyboard

What’s included in the Box

1. MAXFIT108 RGB
2. Switch puller & Keycap puller
3. Type-C charging cable
4. Instruction manual

System Requirements

1. Operating systems: Windows XP/7/8/10: MAC OS
2. One free USB 2.0/3.0 port

Thank you for purchasing FANTECH MAXFIT108 MK855 RGB Mechanical Keyboard. FANTECH MAXFIT108 MK855 RGB is a plug-and-play USB interface mechanical switch keyboard, no need to install any driver for your first use.

Technical Specification

• Product Name: MAXFIT108 MK855 RGB Mechanical Keyboard
• Number of keys: 108 keys
• Switch type: Mechanical
• Anti-Ghosting: All keys
• Size: 435(L)x 128(W) x 41(H)mm
• Weight: 967gr

Size

Keys Function Map

LIGHTING MODES

ADJUSTING LED BRIGHTNESS AND SPEED

MULTIMEDIA

GAME MODES

FN+ 1-5 are also LED custom modes. To record, press FN+1 then press FN+PAUSE, recording start after you press FN+PAUSE. Press the selected buttons and press FN+PAUSE again to end the recording.

Download our Manual/ Software from Our official website
www.fantechworld.com

Software

Main
On the main screen, you can customize the keyboard’s keys and set macros, by clicking on the keys.
Lighting
On this screen, you can customize up to 22 lighting modes, and even set the speed and brightness on some.
Macro

• To set up a new macro, click the “add” icon on the Macro bar, to start the macro customization.
• Next, click the “Start” button, which will begin the macro input process. When finished, click the “Stop” button.
• To save your new macro, click the “save” button after stopping the macro input.
• After recording the macro, you can easily edit it by clicking the input step of the macro. To do this, you can click on “add” to add more steps, or “Modify” to modify the key.
• After recording the macro, you can easily edit it by clicking the input step of the macro. To do this, you can click on “add” to add more steps, or “Modify” to modify the key.
• After setting up the macro, return to the Main screen and click on a key to apply a macro to it.

How to Use

Indicator light

• N: Num lock
• C: Caps lock
• W: Windows lock

Change Switches and Keycaps

1. Remove keycap
   Use the keycap puller tool to clamp on a keycap and pull upwards to detach the keycap from the switch. Sometimes the switch may come off as well if the keycap is secured tightly on the switch, which is normal. For longer keys such as the space bar, always clamp and remove from fhe MIDDLE of the keycap .

2. Remove switch
   Use the switch puller to push in the two tabs located on the top and bottom sides of the switch. Once they are pUshed in, pull upwards to remove the switch from the keyboard case. Warning: lt is very easy to scratch your keyboard case with this tool, so take caution when removing switches!

3. Insert switch
   When inserting a new switch, align the switch to holes on the keyboard, and inset it straight down. There should be minimal resistance and the switch should pop into the frame of the keyboard. It is recommended at this time to have a Notepad ready on your PC, open it, and make sure the switch works when you press it. If the switch does not light up, or the key doesn’f show up on your PC when yoU press it, then the switch was not inserted properly. Remove the switch, and make sure the pins are straight then insert again.
   Note: it is safe to swap switches while your keyboard is plugged into your PC

4. Insert keycap
   Once you have confirmed the switch was properly inserted, snap back in the appropriate keycap.

How to Connect

It’s plug-and-play. Connect the keyboard to computer by inserting a USB jack into your computer’s USB port.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>