StageClix Guitar Studio Set User Manual

**StageClix Guitar Studio Set User Manual

**

A word of thanks

Thank you for choosing StageClix. This unit has been designed with
the professional musician in mind.

All units are made with only the best-quality components and are produced using RoHS-compliant materials. This means they do not contain any harmful substances, like lead or mercury. In StageClix, we have developed a highly effective system that can be used for your favorite instruments or headsets/mics.

If you have any questions, please e-mail them to us at: support@stageclix.com
If you like your StageClix product, please like us on Facebook and on Instagram.

Safety

Do not open; no user-serviceable parts inside
Warranty void when opened.

Do not use phantom power.
The unit is not waterproof; keep away from water and other liquids.
The maximum operating temperature of this unit is 55⁰C.
Keep away from electric heaters and flames.
Clean using a damp cloth.
Do not use cleaning agents or solvents.

What’s in the package?

Transmitter|
---|---
Receiver|
Charger|
Power adapter|

Using StageClix for the first time

1. Plug the supplied power adapter into a 110-230V supply, and the DC plug into the rear-panel DC socket. Only use the StageClix power supply.
2. Plug the transmitter and receiver into the front sockets marked ‘charge ports’ and leave them to charge for some time, preferably more than one hour.

Using the charger

1. Charger controls Channels
   

2. Power indicator
   

3. Pairing indicator
   

4. Select button

Channel selection and pairing

To pair transmitter and receiver, they must both be configured to the same channel. To achieve this, plug the receiver and transmitter to the charger. Use the ‘select’ button to choose the desired channel. Pairing will start automatically and will be indicated by a blinking yellow light. Once pairing is complete, the light will remain steady.

If you are using multiple StageClix sets simultaneously within the same venue, it is important to assign a unique channel to each unit in order to prevent interference and ensure smooth operation.

Charging

• To charge the transmitter and/or receiver plug them into the charger. When the transmitter and/or receiver is plugged into the charger, the LED provides the following indications:
• Pairing: The LED blinks rapidly for several seconds.
• Battery is charging: The LED blinks slowly until the battery is fully charged. Charging time for an empty battery is approximately 3 hours.
• Battery fully charged: The LED dims in a heartbeat-like pattern.

Note that upon unplugging the transmitter from the receiver, it will automatically power off

Using the transmitter and receiver

To turn the transmitter and/or receiver on or off, simply press the button gently for 1 second.

When the transmitter and receiver are successfully paired, the receiver LED will turn green.

A dimming transition of the receiver LED light from green to red signifies a weak signal. If the light turns completely red, it indicates that the transmitter and receiver are no longer paired.

Signal quality

This system uses a patented digital transmission technique and
unique triple-frequency diversity for a reliable noise-free link.

However, there are some points to maximize the range:

• Keep proper distance from broadband interference sources like Wi-Fi access points, Wi-Fi-enabled laptops, and switching power supplies.
• Stone walls and reinforced ferroconcrete walls can partially block the signal.

Technical details

Receiver

• Operating frequency: 5.8 GHz band (5.725 GHz – 5.850 GHz)
• Sturdy Polycarbonate housing
• Li-Po battery life: up to 8 hours

Transmitter

• Operating frequency: 5.8 GHz band (5.725 GHz – 5.850 GHz)
• RF output power: 25 mW EIRP (14 dBm)
• Input impedance: 4.7 MOhm // 39 pF
• Bitstream audio ADC: 103 dB SNR, 24 bit
• Frequency response: 10 Hz-21 kHz ±3 dB @1 Vpp
• Li-Po battery life: up to 8 hours
• ESD-protected
• No compander
• Sturdy Polycarbonate housing

Charger

• 12 different selectable channels
• Fast charging
• Bright LEDs
• Full metal enclosure
• Power supply: 9V 1A

Warranty

• The Stage Clix product you have purchased is covered by a warranty for a term of 24 months, commencing on the date of purchase. Please retain your sales receipt as proof of purchase.

We shall satisfy our warranty obligations by remedying any material or manufacturing faults free of charge at our discretion, either by repair or by exchanging individual parts or the entire appliance.

This warranty does not cover the following:

• Minor faults or deviations in the quality of the product which do not affect the product’s value or suitability for its intended purpose.
• Faults resulting from improper use, e.g., operating errors, mechanical damage, incorrect operating voltage. Proper use for the purpose of this warranty is defined as the use of the product in compliance with the conditions stated in these instructions for use.
• Any damages resulting from contact with water. Please note that the product is not waterproof.
• Faults arising from normal wear and tear.

The purchaser bears the cost and risk of returning shipping to the point of sale.

Warranty claims can be made in any country whose statutory rights are not in conflict with our warranty regulations. No other warranty claims or claims over and above those stated in these terms and conditions will be accepted.

Compliances

CE declaration of conformity

This unit has been tested in accordance with the R&TTE Directive:

• ETSI EN 300440-2 (Radio)
• EN 301 489-3 V2.3.2 (EMC)
• EN 62368 (Safety)

Manufacturer declarations

This unit is compliant with the Restriction of Hazardous Substances
(RoHS) Directive. Handle and dispose of the transmitter and receiver with care.

• To replace the batteries, contact StageClix or an authorized StageClix dealer.

• Incompatible batteries or charging using any device other than the StageClix charger can cause serious injuries or damage to your StageClix product.

• Never throw the charger, transmitter, or receiver on a fire.

• Follow all local regulations when disposing of this product.

• Never place the charger, transmitter, or receiver on or in a heating device, such as a microwave oven, stove, or radiator.
  The transmitter and receiver contain batteries that may explode when overheated.

• Never crush or puncture the charger, transmitter, or receiver. Avoid exposing the charger, transmitter, and receiver to high external pressure, which can lead to an internal short circuit and overheating.

• Protect the product from damage.

• Avoid exposing the charger, transmitter, and receiver to very low or very high temperatures (below 0°C/32°F or above 45°C/113°F). Extreme temperatures can reduce the battery life of the transmitter and receiver.

• Never use a damaged charger, transmitter, or receiver.

Ensure maximum battery and charger life:

• Avoid charging the transmitter and/or receiver for more than a
  week, as continuous charging may shorten battery life.

• Over time, unused batteries will discharge. Do not allow the batteries to fully discharge over time, since this can cause them damage.

• Charge the transmitter and receiver before use.

• Disconnect the charger from power sources when not in use.

• Use the transmitter and receiver only for its intended purpose.

Correct disposal of this product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems)

If the product, accessories, or literature bears this mark, it means that the product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer from whom they purchased this product, or their local government office, for details on where and how they can take these items for environmentally safe recycling.

Commercial users should contact their suppliers and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial waste for disposal.

www.stageclix.com
The Netherlands StageClix is a trademark of Qdes Works BV. Qdes Works BV shall in no event be liable for damages arising from use of this product

References

• StageClix Wireless Audio Solutions for Professional Musicians – Stageclix

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>