ION Audio IPA173 Battery Powered Portable Speaker System User Guide

ION Audio IPA173 Battery Powered Portable Speaker System

Product Specifications

• Model: iPA173
• Manufacturer: Unknown
• Power Supply: AC
• Voltage: 110-240V
• Frequency Range: 87.5 – 108 MHz
• Dimensions: 10 x 5 x 3 inches
• Weight: 2 lbs

Product Usage Instructions

Safety Instructions

1. Read and keep the instructions provided.
2. Check for any important information on the product exterior before installation.
3. Clean the product only with a dry cloth.
4. Avoid placing the product near water sources or heat-producing devices.
5. Ensure proper ventilation by not blocking any openings.
6. Use the recommended power supply and accessories.
7. Secure the power cord when not in use and check for damages before reuse.
8. Disconnect the product during lightning storms or long periods of non-use.
9. Follow manufacturer’s guidelines for voltage selectors and battery replacements.
10. Do not modify the plug or defeat safety features.

Installation

Place the product on a stable surface with proper ventilation. Avoid blocking any ventilation openings. Connect the power supply as per instructions provided. Ensure the product is placed away from heat sources and water-prone areas.

Operation

To operate the device, plug it into a suitable power outlet. Turn on the device using the designated power button. Adjust the frequency range as needed to tune into your desired radio station. Use the volume control to adjust the sound output.

Frequently Asked Questions

Q: What should I do if the product gets wet?

A: In case of water exposure, disconnect the product immediately from the power source and allow it to dry completely before attempting to use it again.

Q: Can I use this product outdoors?

A: It is recommended to use this product indoors to prevent exposure to moisture and extreme temperatures that could affect its performance.

SUPPORT.IONAUDIO.COM
For articles, videos, web and chat support

IONAUDIO.COM/WARRANTY
For complete warranty information

GETTING STARTED

Package Contents: Trouper™ 100, IEC C13 Power Cable (6 ft./ 183 cm), Microphone with Cable (8.2 ft./ 250 cm), Telescoping FM Antenna (Max Length: 2.52 ft./ 76.8 cm), Quickstart Guide

• REGISTER YOUR PRODUCT
• DOWNLOAD THE USER GUIDE
• SIGN UP FOR THE NEWSLETTER

PLUG-IN TO FULLY CHARGE PRODUCT BEFORE USE, AND THEN POWER ON

ION SOUND CONTROL APP

Connect to the ION SOUND CONTROL™ App for a more dynamic experience:

• Connect phone to speaker via Bluetooth• (Step 4).
• Download App from Apple App Store or Google Play Store.
• Open the App on your device.

CREATE YOUR SOUND EXPERIENCE

BLUETOOTH

• Power on speaker for Bluetooth mode; otherwise press SOURCE to select Bluetooth mode.
• Choose “TROUPER 100” in your Bluetooth settings menu.
• Press Play in music player App of choice on device.
• Make sure device volume is turned up.
• Press PLAY /PAUSE button to start or stop audio.
• Press < / > buttons to navigate tracks.

USB MODE

• Insert a USB drive (not included) with MP3 files on it (16 GB max).
• Press PLAY/PAUSE button to begin playback. Tracks will play in the order that they appear on the device.
• Press > button to skip to the next track. Press < button to go to the beginning of the track. Press again to skip to the previous track.
• Press REPEAT button to choose playback mode (see User Guide).
  CHARGING YOUR DEVICE (SV, 1A USB-A Port)
  Plug your device’s USB cable into the USB-A port to charge it.

AUXIN

• Plug any sound source into the AUX input on the back panel with a 1/8″ cable (not included).
• Press the SOURCE button to select AUX mode.
• Make sure the CH1 volume knob is turned up.

FM Radio
(Frequency Range: FM 87.5 – 107.9 MHz)

• Attach the included FM antenna to the input marked FM ANT on the rear panel. Use a wrench to secure the antenna if necessary.
• Press the SOURCE button to select FM mode.
• Press < / > to tune stations. Hold < / > to seek.
• See User Guide to learn how to save and recall presets.

CUSTOMIZE YOUR SOUND EXPERIENCE

ENCODERS

• Push CH1 to toggle between MAIN and VOL control. Rotate to adjust settings and channel volume.
• Push CH2 and CH3 to cycle between VOL, ECHO, and REVB for each channel. Rotate to adjust the selected parameter.

COMBO INPUTS

• Plug the included microphone or other line-level device into CH2 input on the back panel. Adjust MIC/LINE switch. Push CH2 encoder to select volume and turn to adjust level.
• Plug the included microphone or other instrument into CH3 input on the back panel. Adjust MIC/INST switch for intended use (microphone or instrument). Push CH3 encoder to select volume and turn to adjust level.

EQ PRESETS
Press to cycle through these 4 EQ presets:

• 1-Music/DJ: Default setting for general music playback.
• 2-Live/Performance: Optimized for instruments and singing. Great for busking.
• 3-Speech/Vocals: Adjusted to boost vocals for clear singing and presentations.
• 4-User Mode: Custom EQ setting to personalize from the App. Default is flat.

WIRELESS STEREO-LINK'”
See User Guide or App for link instructions to connect to another Trouper™ 100 speaker.

Important Safety Instructions

1. Read and keep these instructions. Heed all warnings and follow all Instructions.
2. Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
3. Clean only with dry cloth.
4. Water and Moisture (if applicable): Do not use this apparatus near water. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Electrical equipment should NEVER be kept or stored in damp environments.
5. (If applicable) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place exposed flame sources such as lighted candles on the apparatus.
7. (If applicable) This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
8. (If applicable) Be careful not to damage the power cord. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.
9. Unplug this apparatus during lightning storms or when unused for long periods of time.
10. Only use attachment/accessories specified by the manufacturer.
11. (If applicable) Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12. Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.
13. Caution (if applicable): Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an installed battery) shall not be exposed to excessive heat such as sunshine, fire, etc.
14. (If applicable) Do not defeat the safety purpose of the polarized or grounding-type plug.
15. Protective earthing terminal (if applicable): The apparatus should be connected to a mains socket outlet with a protective earthing connection.
    • Denmark (Danmark): Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.
    • Finland (Suomi): Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
    • Norway (Norge): Apparatet må tilkoples jordet stikkontakt.
    • Sweden (Sverige): Apparaten skall anslutas till jordat uttag.
16. For Class II apparatus only: This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. When servicing use only identical replacement parts installed by an instructed person or with the use of ready-made leads or cords.
17. Warning (if applicable): Provide an earthing connection before the mains plug is connected to the mains. When disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains.
18. (If applicable) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
19.  Warning (if applicable): To prevent possible hearing damage, do not listen at high volume levels for long periods.
20. This apparatus is for professional use only. Intended operational climate: moderate.

Safety Notices

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un- insulated “dangerous voltage”  within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

INSTRUCTIONS: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance.

CAUTION (for U.S.A. & CANADIAN models only): TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTICE CONCERNING LASER PRODUCTS: DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

NOTICE CONCERNING FCC REGULATIONS: You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (a) reorient or relocate the receiving antenna; (b) move this unit; (c) increase the separation between the equipment and receiver; (d) connect the equipment into an outlet on a circuit different from that to which the receiver is connected; (e) be sure that all cables are properly shielded, using a choke or ferrite where appropriate; or (f) consult the dealer or an experienced radio/television technician for help. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

For Canadian models: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development (ISED) Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under ISED regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by ISED. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications. This device operates on a no- protection, nointerference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-Power Radio Apparatus in the TV Bands.

Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20 cm between the radiator & your body.

For wireless products supporting the 5.15–5.35 GHz frequency band (if applicable): Usage of the 5.15–5.35 GHz band are restricted to indoor operation only. This applies to the following countries: AT, BE, BG, CZ, DK, EE, FR, DE, IS, IE, IT, EL, ES, CY, LV, LI, LT, LU, HU, MT, NL, NO, PL, PT, RO, SI, SK, TR, FI, SE, CH, UK, HR. For 240-volt use in U.K., use NEMA®-style 240-volt plug. For other countries use proper plug for local outlet.

ESD/EFT Warning: This unit may contain a microcomputer for signal processing and control functions.
In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lock up. In the unlikely event that this should happen, turn off the unit, wait at least five seconds, and then turn it back on again. The pins of connectors identified with this ESD warning symbol should not be touched.

If the product or remote control contains a button cell or coin battery (CR1220, CR2025, or CR2032; 3.0 VDC):

WARNING

• INGESTION HAZARD: This product contains a button cell or coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of CHILDREN.
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body. Call a local poison control center for treatment information.

Button cell or coin batteries located inside the product are non-replaceable.
Do not force discharge, recharge (non-rechargeable batteries are not to be recharged), disassemble, heat above manufacturer’s specified temperature rating, incinerate, or subject to extremely low air pressure. Doing so may result in injury due to venting, leakage, or explosion resulting in chemical burns.

Lithium-Ion Battery Information
Operating ambient temperature: 0 – 45°C (32 – 113°F) Storage and transportation ambient temperature: -10 – 60°C (14 – 140°F), Altitude not higher than 5000m (16,404 ft.) (air pressure not less than 54 kPa) WARNING: Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, may result in an explosion; Leaving a battery in an extremely high temperature surrounding environment, such as sunshine, fire, or hot surface may result in an explosion or the leakage of flammable liquid or gas; A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Disposal of Batteries (if applicable): Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Even used batteries may cause severe injury or death. Do NOT dispose of batteries in household trash or incinerate. Overheated batteries can rupture or explode. If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc.

• Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium button cell batteries with normal household waste. They do not pose a health or environmental risk during normal use or disposal. (Alkaline batteries are composed primarily of common metals like steel, zinc, and manganese.) Do not dispose of large amounts of alkaline or lithium button cell batteries in a group. Used batteries are often not completely “dead.” Grouping them together can bring these “live” batteries into contact with one another, creating safety risks. To avoid this, insulate each battery with tape or other non-conductive material to ensure it does not discharge. Proven cost-effective and environmentally safe recycling processes are not yet universally available for alkaline and lithium button cell batteries. Some communities offer recycling or collection of these batteries. For more information, refer to your local ordinances or contact your local government.
  Lead-acid batteries: Dispose of lead-acid batteries by bringing them to an electronic waste center or recycling center, or dispose of them in accordance with your local ordinances. (Rechargeable lead-acid batteries are the same type used in automobiles and should be disposed of in a similar fashion.)

ION Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
NEMA® is the registered trademark and service mark of the National Electrical Manufacturers Association.
All other product names, company names, trademarks, or trade names are those of their respective owners.

World Headquarters

inMusic Brands, Inc. 200 Scenic View Drive Cumberland, RI 02864 USA

U.K. Office
inMusic Europe, Ltd. Unit 3, Nexus Park Lysons Avenue Ash Vale HAMPSHIRE GU12 5QE UNITED KINGDOM

Germany Office
inMusic GmbH Hans-Günther-Sohl-Str. 4a 47807 Krefeld GERMANY

References

• Sound Experiences | ION Audio
• Support : ION Audio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>