DRI ECLIPSE07-3-23 Bedwetting Alarms Instruction Manual

DRI ECLIPSE07-3-23 Bedwetting Alarms

Product Information: UrosensorTM

Specifications:

• Manufacturer: Anzacare Limited
• Country of Origin: New Zealand
• Model: UrosensorTM
• Control Features: Volume Adjustment

Product Usage Instructions:

Placement of UrosensorTM:
To ensure proper functionality, follow these steps to place the UrosensorTM correctly:

1. Place the UrosensorTM on the mattress, near the child’s waist area.
2. Ensure that the UrosensorTM is positioned securely and does not move during sleep.

Alternative Placement Options:
If using double reinforced underwear, you can also place the UrosensorTM in the following way:

1. Cut a 25mm (1 inch) slit in the double reinforced underwear.
2. Insert the UrosensorTM into the slit, ensuring it is positioned securely.

Volume Adjustment:
The UrosensorTM comes with a volume adjustment control. Follow these steps to adjust the volume:

1. Locate the volume adjustment control on the UrosensorTM.
2. Turn the control clockwise to increase the volume or counterclockwise to decrease it.
3. Test the volume level by triggering the alarm manually to ensure it is set to your preference.

Important Instructions

Read these instructions before using the product. These instructions apply to both the DRI Sleeper® eclipse and the DRI Eclipse™ alarms (US market only). In the context of these instructions, references to the DRI Sleeper® eclipse also include the DRI Eclipse™.

The solution for urinary incontinence with the DRI Sleeper Eclipse can take from a few weeks to a few months. For best results, work together with your child. Teach them how the alarm works and practice what to do when the alarm goes off.

Urinary incontinence alarms teach your child to associate the sound of the alarm with a full bladder. If your child remains asleep while the alarm sounds, it’s important to wake them up so they can learn this association and eventually respond to the sensation of a full bladder before the alarm goes off. Always encourage and recognize their progress.

Use the DRI Sleeper Eclipse EVERY NIGHT until the child achieves 14 consecutive dry nights. Then, your child may stop using the alarm.

The DRI Sleeper® eclipse Alarm

Alarm Base

• ON/OFF switch
• Sync button

The UROSENSOR ™

• Battery compartment with cover
• Volume control adjustment
• Panasonic CR2354 coin battery
• Battery drawer release

Cleaning the DRI Sleeper ® eclipse
For the alarm base, clean with a damp cloth and mild detergent or disinfectant. Do NOT submerge the alarm base in water, or place it where urine can seep in.
For the UROSENSOR™, rinse with liquid soap and water, and dry thoroughly, especially the space between the black sensor strips.

Note: Do not use chlorine-based cleaners or place the UROSENSOR™ in the washing machine or dryer as it may cause irreparable damage to the sensor strips.

How to Use the DRI Sleeper® eclipse

1. Place the alarm on a nightstand near the child’s bed. Turn on the DRI Sleeper® eclipse by moving the ON/OFF switch to the ON position. The alarm will emit five rapid beeps to indicate it is ready.
2. Remove the UROSENSOR™ from the alarm. Please note that touching the sensor strips with wet fingers will activate the alarm. Therefore, avoid touching the sensor strips when handling the UROSENSOR™. If the UROSENSOR™ is activated accidentally, turn off the alarm and dry the UROSENSOR™ to reset it.
3. Place the UROSENSOR™ with the black sensor strips facing towards the child’s genital area in a pocket and add absorbent layers from small sanitary towels or regular woman’s pads. For this, cut a 25 mm (1 inch) slit in the absorbent layers with sharp scissors. With the tips of the scissors, create a pocket to insert the UROSENSOR™ inside.

Other Ways to Place the UROSENSOR™

Troubleshooting

If your child wets the bed and the UROSENSOR™ does not activate the alarm, ensure that both the alarm and the UROSENSOR™ are functioning correctly by following these steps:

1. Turn on the alarm. It should beep five times rapidly.
2. Wrap the UROSENSOR™ with a small piece of cloth or paper towel of 2-3 layers. Hold it at a distance of 2-3 cm from the back of the alarm and pour 1-2 teaspoons of warm water onto the UROSENSOR™. It should activate the alarm within 2-3 seconds.

Preparing Your Child to Use the Alarm
To help your child use the alarm, practice what should be done when the alarm activates during the night. This is called “preparation” and is based on a strategy called Prospective Memory, which involves establishing a mental note to remember in the future. To prepare your child’s brain to wake up with the sound of the alarm, simply practice what to do after turning off the alarm.

Synchronizing the UROSENSOR ™ with the Alarm Base
When purchasing a new UROSENSOR™, it must be synchronized with the existing alarm base. If you purchase a replacement or additional alarm base, you must also synchronize it with the existing UROSENSOR™.

Specifications

Frequently Asked Questions:

Q: How can I contact the manufacturer for support or inquiries?
A: For support or inquiries, you can reach Anzacare Limited through the following contact information:

• Address: PO Box 400, 13 Mahara Place, Waikanae 5036, New Zealand
• Website: www.dri-sleeper.com
• Last Updated: 07/03/2023

The alarm goes off, but my child hasn't wet the bed. Why does this happen?

Sometimes, the UrosensorTM can be activated by sweat, even if there is no urine. To prevent this, follow these tips: Ensure proper placement of the UrosensorTM to minimize false alarms. Consider adjusting the volume control to a lower setting if sweat-triggered false alarms persist. If the issue persists, consult the manufacturer for further assistance.

Who is the manufacturer of the UrosensorTM?

The UrosensorTM is manufactured by Anzacare Limited, based in New Zealand.

What should I do if the alarm doesn't sound?

Check the battery and ensure the UROSENSOR™ is properly placed and dry. Refer to the 'Troubleshooting' section for more detailed instructions.

How can I help my child respond to the alarm?

Use the preparation strategy outlined in the 'Preparing Your Child to Use the Alarm' section and encourage them each time they respond correctly.

Can I use multiple UROSENSOR™ devices with one alarm base?

Only the last UROSENSOR™ synchronized with the alarm base will activate it. However, you can use multiple alarm bases with a single UROSENSOR™.

References

• Sleeper - Fantasy Football, Basketball, Esports, and Daily Fantasy Sports
• DRI Sleeper Bedwetting Alarms

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>