CULTURE X13 Magnetic Shock Absorbing Phone Holder User Manual

CULTURE X13 Magnetic Shock Absorbing Phone Holder

Product Information

Specifications

• Magnetic Shock Absorbing PhoneHolder X3
• Product Features:
  • Note: Mobile phone bracket, magnetic levitation barrel punch design, appearance design structure are protected by national patents.
  • Very low standby current with negligible zero current indicator (theoretical standby time of 12V/10AH battery is 50 years).
  • The mobile phone shock absorber is designed to filter high-frequency and high-intensity strong shocks.
  • The main function is to protect the mobile phone, and it cannot completely isolate the shock.
• Applicable model size:
  • Compatible with a wide range: 4.8-7 inch mobile phones
  • Length range (including mobile phone case): 115-172mm
  • Width range (including mobile phone case): 62-79mm
  • Thickness range (including mobile phone case): N/A (not specified)

Product Usage Instructions

Installation

1. Ensure that the surface where you want to install the Magnetic Shock Absorbing PhoneHolder X3 is clean and dry.
2. Peel off the adhesive backing from the bottom of the holder.
3. Position the holder on the desired surface and press firmly to secure it in place.

Usage

1. Adjust the holder to the desired angle for optimal viewing.
2. Place your mobile phone onto the holder, ensuring it is centered and secure.
3. The magnetic levitation barrel punch design will hold your phone in place.
4. The shock absorber feature will filter high-frequency and high-intensity strong shocks, protecting your mobile phone.

Maintenance
To clean the Magnetic Shock Absorbing PhoneHolder X3, simply wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that may damage the surface.

Frequently Asked Questions (FAQ)

• Q: What is the purpose of the Magnetic Shock Absorbing PhoneHolder X3?
  A: The main function of the Magnetic Shock Absorbing PhoneHolder X3 is to protect your mobile phone from strong shocks. It uses a magnetic levitation barrel punch design to securely hold your phone in place and a shock absorber feature to filter high-frequency and high-intensity shocks.

• Q: What sizes of mobile phones are compatible with this product?
  A: The Magnetic Shock Absorbing PhoneHolder X3 is compatible with a wide range of mobile phones. It can accommodate mobile phones with a length range (including the mobile phone case) of 115-172mm and a width range (including the mobile phone case) of 62-79mm. The thickness range is not specified.

Please read this user guide before installing and using this product, and keep it for future use

Product Features

• Hold your phone with one hand
• Universal adjustment, multi-angle adjustment
• Anti-theft buckle adjustment, safety guarantee
• The industry’s first magnetic levitation buffer design, greatly reducing the chance of mobile phone vibration damage
• 15W QI standard wireless fast charging
• 10W USB wired charging interface
• IP68 level dustproof and waterproof, no fear of wind, rain, sand and dust
• Applicable to various car models
• CNC aluminum alloy panel, stable and durable

Note: mobile phone bracket, magnetic levitation barrel punch design, appearance design structure are protected by national patents. Very low standby current with negligible zero current indicator (theoretical standby time of 12V/10AH battery is 50 years). The mobile phone shock absorber is designed to filter high-frequency and high-intensity strong shocks. The main function is to protect the mobile phone, and it cannot completely isolate the shock.

Applicable model size

• Compatible with a wide range: 4.8-7 inch mobile phones
• Length range (including mobile phone case): 115-172mm
• Width range (including mobile phone case): 62-79mm
• Thickness range (including mobile phone case): <12.5mm

Note: The above size is the limit size range. It is recommended to use a mobile phone protective case to increase the locking friction. Please refer to the size with the protective case.

Product structure and Instructions

Note: The wireless charging and receiving module of the mobile phone must be aligned with the wireless charging coil area of the mobile phone bracket to charge

Product structure and description

INSTALLATION

Installation and commissioning

• • Install the screws, mushroom heads, and posts on the mobile phone holder.
• The red of the power connector is connected to the positive pole of the battery, and the black is connected to the negative pole of the battery.
• Place it under the power connection terminal of the original car, and use the original car torque to lock it.

* Note: There is also a yellow ACC line in the mobile phone holder harness, which can be connected to the positive pole of the battery, or to the pos itive pole of the lock head,
Tail light positive wire, etc. The input voltage is between 12V-24V

Use a mobile phone with a wireless charging function to test the wireless charging function, and use a USB charging cable to test wired charging.

Daily Use Instructions

1. The waterproof level of the mobile phone bracket is IP68, including the USB interface, even if the USB interface is not set in the dustproof cover, it is also waterproof. Putting in the dust cover can prevent the USB interface from accumulating dust and prolong the service life.
2. For daily car washing operations, do not use corrosive cleaning agents to scrub the product (ma y cause damage to the waterproof structure), try to avoid direct washing with high-pressure water guns,If necessary, keep a washing distance of more than 1 meter.
3. Try to avoid using wired charging when it is raining to avoid corrosion of the charging interface.
4. Please use a plastic phone case together to increase locking friction.

Technical Parameters

Fault Analysis and Elimination

reversed, the yellow wire ACC of the wiring harness is not connected,Low battery voltage| Check the power connection, connect the yellow wire ACC to the positive pole of the power supply Or the origin al car ACC or the positive pole of the original car lock,Battery voltage needs DC12v
Wireless charging doesn’t work| Charging module misaligned / damage to wiring harness components| Move the phone up and down to adjust the charging position If it still can’t charg e, replace the wiring harness
Excluding the above problems still cannot support the work| circuit damage| Contact us for factory repair

FCC

This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>