Lordear 33 inch Undermount Kitchen Sink Stainless Steel Single Bowl Kitchen Sinks Instruction Manual
- June 14, 2024
- LORDEAR
Table of Contents
INSTALLATION INSTRUCTIONS
Undermount Kitchen Sink
33 inch Undermount Kitchen Sink Stainless Steel Single Bowl Kitchen
Sinks
- Premium grade handmade sink
- 16 gauge stainless steel 304
- Vertical angle corner/R10 radius coved corner
- Excellent sound and thermal insulation ability
- Limited lifetime warranty
In Accordance with Industry Codes & Standards for USA & Canada
All LORDEAR Stainless Kitchen Sinks are Certified & Listed By cUPC.
CAUTION
Considering its weight and sharp edges, the sink should be taken out slowly
and cautiously. It is better to protect your eyes and ears by using safety
gloves and protective gear. We recommend two or more people to lift or mount
the sink. Please DO NOT attempt to handle or install this product alone.
IMPORTANT: LORDEAR strongly recommends that this product be installed by
a licensed plumber. Ensure that installation complies with applicable plumbing
and building codes.
TOOLS
Safety glasses / maker / silicone adhesive sealant / tape measure / Jigsaw/ rags /wood braces/ level/ screws / bladed screwdriver
Types of Under Mount Sink Installation
Step 1:
Position Cutout Template and Trace It with Pencil.
Check the cut-out template against the actual sink to ensure a proper sized
cut-out, then Place the cut-out template in the desired location on the
countertop
Step 2:
Cut the opening in the countertop by carefully following the traced line. Pls
use the appropriate saw that best fits your countertop material.
Step 3:
Drill Hole in Countertop. Turn the countertop over and drill 3/8″ diameter x
“2″deep hole in the countertop, mounting holes should be 1/2″ from edge of
sink. Insert anchors into drilled holes and lightly tap with a hammer until
flush.
Step 4:
Secure Sink to Countertop. Use a bead of silicone (or preferred adhesive)
around the rim of the sink/countertop underside. Check the alignment of the
sink to the cutout in the countertop. Place sink over cutout hole and press
firmly.
Step 5:
Attach Mounting Hardware to Secure Bowl. Remove excess sealant from inside
lip. Allow sealant to set for 30 — 60 minutes.
Step 6: Install Plumbing Fixtures.
- Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet follow manufacturer’s instruction.
- Run water into sink and check for leaks.
MAINTENANCE INSTRUCTIONS
FAQS
Why are there rusts in my new kitchen sink?
Reasons: Rusts and stains on a stainless steel sink can be caused by a variety of factors, including: 1.1 Airon pan or other metal pans are left in the sink for days. 1.2 Utensils or flatware are left in the sink for days. 1.3 Metal cans (pet food cans, vegetables cans, etc.) are left in the sink for days. 1.4 The water contains iron (Suggestion: get an iron filter to help alleviate this issue). 1.5 Certain dish soaps contained by metal bottle or built-in soap dispenser. 1.6 Wet sponges or colored towels are left in the sink for days. Prevention and Treatments: 1.1 Install the sink after all innovation project is done and clean your sink right after installation. 1.2 Clean your sink after each use. 1.3 Properly remove the rusts and molds using a scouring pad.
What will scratch or harm the sink?
Factors: 1.1 Improper packaging can lead to scratch marks. The accessories may scratch the sinks during transit. (LORDEAR will try our best to pack the sinks well which would avoid the scratches) 1.2 The sink can be easily scratched by sharp objects, please use soft cloth to clean the sink. Prevention and Treatments: 1.1 Minor scratch: You can use a sponge with toothpaste to polish it repeatedly. 1.2 Moderate scratch: Use a scouring pad to polish small areas. 1.3 Serious scratch: Purchase stainless steel polisher.
What can cause the water stains?
Reasons: This is normal for a kitchen sink, but it is easy to wash out. Prevention and Treatments: 1.1 Scouring powder can help solve the problem effectively. 1.2 Clean Daily. Use a soft towel to wipe the sink with warm water. Mixing in some washer-fluid is much better. Remember wipe it dry at last.
DO
- Clean Daily. Use a soft towel to wipe the sink with warm water. Mixing in some wash-er-fluid is advisable. Remember to wipe it dry.
- Remember to rinse the sink after using any cleaning agent and wipe dry. If any mineral substance is built up on the sink, clean it up as soon as possible.
- Properly remove the rust, molds, or scratches with a scouring pad. Rubbing the sink in the direction of the brush.
- Rub it slightly with a soft towel in the direction of brushed lines.
- Keep the sink dry after you use it. Any standing water can cause mineral deposits accumulation, which could turn to severe water stains.
DO NOT
- Leave water spots, utensils, or steel cool-ware in the sink for a long time, which could become rust spots on your sink surface.
- Leave cleaning agents or bleach sitting in your sink for a long time which may cause the sink to discolor or damage the surface.
- Use steel wool or a scouring pad to rub.
- Leave rubber mats, cleaning pads, or sponges in the sink for a long time as this may ruin the finish of your sink.
- Cut food in the sink.
- The hard water may also cause rust stains.
How to use the scouring pad correctly?
- Choose a dry, clean, and non-scratch scrub pad.
- Follow the direction of the brush to remove rust.
STAINLESS STEEL FARMHOUSE SINKS
General Recommendations:
- Check all the matching products when opening the package.
- Check your sink for any noticeable damage before installation.
- Read the installation and maintenance instructions thoroughly before installation.
- Consult your cabinet dealer before ordering your customized sink cabinet.
- LORDEAR recommends that sinks should be installed by professional contractors.
- LORDEAR does not be responsible for any damage to the countertop, sink fixture, faucet, and personal injury during installation.
SERVICE AND SUPPORT
LORDEAR carries out the quality standard and refines on every detail, its ingenious modeling and exquisite craftsmanship give the sink an artwork-like sense, revealing a “delicate” and “natural” beauty within an inch. Its user- friendly design, advanced drainage system and unique anti-bacterial technique help to solve a lot of trouble in the kitchen. Moreover, the nanotechnology series of sinks featuring high-temperature resistance, shock resistance and oil resistance advantages, also, combining tradition and innovation theory perfectly, provide you with an extraordinary living experience.
CONTACT US:
Email: lordearproducts@gmail.com
URL: www.lordear.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>